| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...view more CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. view less | Request Sample |
| DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...view more Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. view less | Request Sample |
| DOWSIL™ 11 Additive | Univar Solutions | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | Request Sample |
| DOWSIL™ 56 Additive | Univar Solutions | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | Request Sample |
| DOWSIL™ 57 Additive | Univar Solutions | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | Request Sample |
| HARDSIL™ AM | Gelest, Incorporated | Primerless silicone resin dispersed in a mixture of alcohols including methanol, n-butanol and isopropanol. | |
| HARDSIL™ AP | Gelest, Incorporated | Primerless phenyl modified silicone dispersed in xylene for continuous use at temperatures up to 360 degrees Celsius. | |
| HARDSIL™ AR | Gelest, Incorporated | Primerless modified phenyl silicone resin dispersed in xylene for continuous use at temperatures up to 325 degrees Celsius. | |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...view more LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. view less | Request Sample |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...view more LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. view less | Request Sample |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...view more NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. view less | |
| PEL-SIL CL310 | Ele Corporation | PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...view more PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. view less | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...view more PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. view less | |
| POLYWAX™ 1000 | Univar Solutions | POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 2000 | Univar Solutions | POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 3000 | Univar Solutions | POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 400 | Univar Solutions | POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 500 | Univar Solutions | POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 850 | Univar Solutions | POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ EP-1100 Copolymer | Univar Solutions | POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density...view more POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ EP-700 Copolymer | Univar Solutions | POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density ...view more POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. view less | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. view less | |
| SLIP-AYD® FS 444 | Elementis | SLIP-AYD® FS 444 is a liquid additive for increasing surface slip and mar resistance of water borne and polar solvent borne coatings. | |
| XIAMETER® OFX-0077 Fluid | Univar Solutions | XIAMETER® OFX-0077 Fluid is a 100% solids silicone polyether that shows good compatibility with water-based formulations. It provides leveling and wetting performance, enhances gloss, and improves mar resistance in coatings formulations. | Request Sample |
| XIAMETER® OFX-0190 Fluid | Univar Solutions | XIAMETER® OFX-0190 Fluid is a modified silicone, designed primarily to provide leveling, slip and mar resistance in water and solvent borne paints, inks and coatings. This additive also improves anti blocking properties, gloss and substrate wetting. | Request Sample |
| XIAMETER® OFX-0536 Fluid | Univar Solutions | XIAMETER® OFX-0536 Fluid is a dual functional polydimethyl-siloxane. The highly polar nature of the amino functional groups and the ability of the methoxy functional groups to cure enable a soft and glossy film to deposit and adhere strongly to leather su...view more XIAMETER® OFX-0536 Fluid is a dual functional polydimethyl-siloxane. The highly polar nature of the amino functional groups and the ability of the methoxy functional groups to cure enable a soft and glossy film to deposit and adhere strongly to leather surfaces. view less | Request Sample |
