| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...view more AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. view less | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...view more FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. view less | |
| High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...view more YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. view less | |
| High Chlorinated Polyethylene-YURON HCPE-H (A) | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high mole...view more High Chlorinated Polyethylene-YURON HCPE-H (Adhesive Level) is an environmental protection and high-performance resin for the adhesive market. It is deeply chlorinated by PE resin through using aqueous phase chlorination technology. HCPE-H has a high molecular weight, high viscosity and strong adhesive force. It can be dissolved in toluene, xylene, and dichloroethane. This product can bind all kinds of PVC or CPE tubes, pipes, and plates, replace CPVC adhesives, bond metal materials. and can be used as an adhesive in the fiber industry. view less | |
| High Performance High Chlorinated Polyethylene-YURON HPE 2200 | Yuron New Material | YURON HPE 2200 is a high performance high chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to produce high grade adhesives. | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...view more HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. view less | |
| Regalflex™ E1003 | Univar Solutions | Regalflex™ E1003 is a copolymer of propylene and ethylene, having a melt viscosity of 6000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1016PL-1 | Univar Solutions | Regalflex™ E1016PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. | Request Sample |
| Regalflex™ E1060 | Univar Solutions | Regalflex™ E1060 is a copolymer of propylene and ethylene, having a melt viscosity of 6000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1060PL | Univar Solutions | Regalflex™ E1060PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 5,700 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1060PL-1 | Univar Solutions | Regalflex™ E1060PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 6,000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1200PL | Univar Solutions | Regalflex™ E1200PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 17,000 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1018PL-1 | Univar Solutions | Regalflex™ M1018PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1025 | Univar Solutions | Regalflex™ M1025 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1030PL-1 | Univar Solutions | Regalflex™ M1030PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C. | Request Sample |
| SIA0479.0 | Gelest, Incorporated | Monoallyl-monotrimethylsiloxy terminated polyethylene oxide. | |
| SIM6485.9 | Gelest, Incorporated | Monomethacryloxy-monotrimethylsiloxy terminated polyethylene oxide. | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| SSP-050 | Gelest, Incorporated | Moisture crosslinkable thermoplastic hydrocarbon. |
