| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the ...view more CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. view less | Request Sample |
| EBECRYL® 570 | Allnex | EBECRYL® 570 is a chlorine free polyester resin diluted with of EBECRYL® 40. This resin provides good adhesion to plastic substrates. Films of EBECRYL® 570 cured by ultraviolet light (UV) or electron beam (EB) have low odour. It is recommended for use in:...view more EBECRYL® 570 is a chlorine free polyester resin diluted with of EBECRYL® 40. This resin provides good adhesion to plastic substrates. Films of EBECRYL® 570 cured by ultraviolet light (UV) or electron beam (EB) have low odour. It is recommended for use in: sensitive applications such as food packaging, and over print varnishes for plastic and metallic substrates. view less | Request Sample |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion...view more Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. view less | Request Sample |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...view more Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. view less | |
| ROSKYDAL® E 70 | Allnex | ROSKYDAL® E 70 is a highly flexible, unsaturated polyester resin containing paraffin-wax, which is used as a flexibilizing resin for wax-free polyester, UV-curing styrene systems. The addition of ROSKYDAL® E 70 improves the polishability and sandability of films and improves the adhesion...view more ROSKYDAL® E 70 is a highly flexible, unsaturated polyester resin containing paraffin-wax, which is used as a flexibilizing resin for wax-free polyester, UV-curing styrene systems. The addition of ROSKYDAL® E 70 improves the polishability and sandability of films and improves the adhesion to medium density fiberboard, metal car body components and some plastics. view less | Request Sample |
| SETALUX® 17-7202 | Allnex | SETALUX® 17-7202 is an acetoacetate functional acrylic resin that is combined with a ketimine resin (SETALUX® 10-1440) to form the NISO nonisocyanate "Ketac" system primer. This system provides very fast dry and cure speed at room temperature. This "Ketac" system also provides good sanding, good adhesion...view more SETALUX® 17-7202 is an acetoacetate functional acrylic resin that is combined with a ketimine resin (SETALUX® 10-1440) to form the NISO nonisocyanate "Ketac" system primer. This system provides very fast dry and cure speed at room temperature. This "Ketac" system also provides good sanding, good adhesion to various substrates and good enamel hold out. view less | Request Sample |
| EBECRYL® 1205 | Allnex | EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion...view more EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion promoter in coatings standard UV/EB energy cured systems. view less | Request Sample |
| EBECRYL® 1258 | Allnex | EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion...view more EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with resistance to yellowing. view less | Request Sample |
| EBECRYL® 1300 | Allnex | EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications f...view more EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications for EBECRYL® 1300 include: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items. view less | Request Sample |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...view more Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. view less | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...view more Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. view less | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...view more HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. view less | |
| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion...view more Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. view less | |
| EBECRYL® 118 | Allnex | EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion...view more EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion. view less | Request Sample |
| EBECRYL® 130 | Allnex | EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties o...view more EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. It is recommended for use in: scratch and abrasion resistant coatings, coatings requiring increased thermal resistance, and inkjet inks. view less | Request Sample |
| PHENODUR® PR 401/72B | Allnex | PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelin...view more PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil. view less | Request Sample |
| ALNOVOL® PN 760 | Allnex | ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low ...view more ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance. view less | Request Sample |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...view more Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. view less | |
| CYMEL® U-80 | Allnex | CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion...view more CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates. view less | Request Sample |
| DAOTAN® TW 6425/40WA | Allnex | Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion...view more Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM. view less | Request Sample |
| SILVET® AD 007 | Silberline Manufacturing Co., Inc. | SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographi...view more SILVET® AD 007 is a dry and low dusting aluminum pigment with a fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 007 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. view less | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...view more Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. view less | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...view more Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. view less | |
| SILVET® AD 101 | Silberline Manufacturing Co., Inc. | SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and fle...view more SILVET® AD 101 is a dry and low dusting aluminum pigment with an ultra- fine, granular, corn-flake particle size. This product is designed to provide dispersing capabilities and adhesion in printing ink applications including solvent-based gravure and flexographic inks. SILVET® AD 101 is 99% non-volatile by weight and is also used to display optimal opacity in polymer films. view less | |
| Picassian® PU-539 | Stahl Polymers | Picassian® PU-539 is a non-reactive, medium hard, aromatic, polyether modified polyurethane resin. It is used in polymeric plasticizing resins, flexo and gravure printing inks, and in OPVs. This product is tin free, TDI free, complete soluble in alcohol, has good heat seal resistance properties, has good blocking resistance properties, and has a good balance of adhesion...view more Picassian® PU-539 is a non-reactive, medium hard, aromatic, polyether modified polyurethane resin. It is used in polymeric plasticizing resins, flexo and gravure printing inks, and in OPVs. This product is tin free, TDI free, complete soluble in alcohol, has good heat seal resistance properties, has good blocking resistance properties, and has a good balance of adhesion and alcohol solubility. view less | |
| EBECRYL® 5848 | Allnex | EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, levelling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexi...view more EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, levelling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexibility are often enhanced when EBECRYL® 5848 is used as a modifier in inks and clear or pigmented coatings on paper and metal. view less | Request Sample |
| SETAL® 21-3462 | Allnex | SETAL 21-3462 is a high solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over...view more SETAL 21-3462 is a high solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over chalky substrates. SETAL 21-3462 also improves brushing qualities of medium and long oil based house paints. view less | Request Sample |
| EBECRYL® 210 | Allnex | EBECRYL® 210 is an aromatic urethane diacrylate oligomer. Films of EBECRYL® 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, light colour and good adhesion to various substrates. It is recommended for use in: coatings on...view more EBECRYL® 210 is an aromatic urethane diacrylate oligomer. Films of EBECRYL® 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, light colour and good adhesion to various substrates. It is recommended for use in: coatings on rigid and flexible plastics, wood coatings, screen inks, low gloss coatings, conformal coatings, and flexibilizing other UV/EB curable products. view less | Request Sample |
| DAOTAN® TW 6450/30WA | Allnex | DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion...view more DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates view less | Request Sample |
| CYREZ® 963 Product Family (100% HMMM) | Allnex | CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ...view more CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ 963 products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions. view less | Request Sample |
| Unithane IC-555 NF | Union Specialties, Inc. | Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is ...view more Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primers, and automotive coatings. view less | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps...view more Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. view less | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed...view more Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. view less | |
| Chlorinated Polyolefin | Suny Chem | Chlorinated Polyolefin is an adhesive resin used for coatings, adhesive to plastics, and hot melt adhesives. | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...view more R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but wit...view more CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. view less | Request Sample |
| EBECRYL® 114 | Allnex | EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is ...view more EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is recommended as a reactive diluent for: Coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| SILIKOPON® EC | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperatu...view more SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperature, anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It is used in muffler coatings particularly for motor bikes. view less | Request Sample |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion...view more AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. view less | |
| EBECRYL® 270 | Allnex | EBECRYL® 270 is an aliphatic urethane diacrylate oligomer. Films of EBECRYL® 270 cured by UV or EB exhibit good flexibility, adhesion, abrasion resistance and exterior durability, as well as the excellent non-yellowing properties typical of an aliphatic u...view more EBECRYL® 270 is an aliphatic urethane diacrylate oligomer. Films of EBECRYL® 270 cured by UV or EB exhibit good flexibility, adhesion, abrasion resistance and exterior durability, as well as the excellent non-yellowing properties typical of an aliphatic urethane. It is recommended for use in: coatings for wood and plastic requiring good exterior durability, coatings for rigid and flexible plastics, metal coatings, and low gloss coatings. view less | Request Sample |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...view more Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. view less | |
| SETAL® 21-1395 | Allnex | SETAL® 21-1395 is a premium high solids chain-stopped alkyd, in non-HAPs solvents, for use in the manufacture of coatings that must comply with VOC levels of 3.5 lbs / gallon or lower. Coatings based upon this resin are characterized by high specular gloss, fast dry, good color retention, and excellent exterior durability. SETAL® 21-1395 is designed to have good flexibility and adhesion...view more SETAL® 21-1395 is a premium high solids chain-stopped alkyd, in non-HAPs solvents, for use in the manufacture of coatings that must comply with VOC levels of 3.5 lbs / gallon or lower. Coatings based upon this resin are characterized by high specular gloss, fast dry, good color retention, and excellent exterior durability. SETAL® 21-1395 is designed to have good flexibility and adhesion. view less | Request Sample |
| SETAQUA® 37-1371 | Allnex | SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of relatively low PVC as well as superior adhesion...view more SETAQUA® 37-1371 (formerly SETAQUA 6471) is a fine particle size, styrene-acrylic resin emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. It is used in anti-corrosive coatings of relatively low PVC as well as superior adhesion to new galvanized iron. This product is suitable for anti-corrosive coatings, metal maintenance coatings, and galvanized iron primers. view less | Request Sample |
| PHENODUR® PR 898/52BGB | Allnex | PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant...view more PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant protective coatings for apparatus, vessels and pipelines. Excellent flexibility and retort resistance; low reactivity. The cured film is slighty golden in color. Catalyst CYCAT XK 406 N is necessary. view less | Request Sample |
| EBECRYL® 888 | Allnex | EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion...view more EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion, good abrasion and high flexibility. EBECRYL 888 is recommended for use in flexographic or gravure primer coatings printed on polyester, plasticized PVC and uncoated films. view less | Request Sample |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion...view more Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. view less | |
| SETALUX® 91767 VX-60 | Allnex | SETALUX® 91767 VX-60 (formerly SETALUX® 10-1604) is an acrylic polyol with 4.5% OH that is modified with sag control agent (SCA). When used with aliphatic isocyanates, SETALUX® 91767 VX-60 will give excellent anti-sag properties, good coating appearance and good adhesion...view more SETALUX® 91767 VX-60 (formerly SETALUX® 10-1604) is an acrylic polyol with 4.5% OH that is modified with sag control agent (SCA). When used with aliphatic isocyanates, SETALUX® 91767 VX-60 will give excellent anti-sag properties, good coating appearance and good adhesion as well as durability. SETALUX® 91767 VX-60 will also provide good chemical and gasoline resistance plus improved application properties. view less | Request Sample |
| Unithane IC-151 NF | Union Specialties, Inc. | Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss...view more Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 10-150cps. It is often designed for industrial coatings, interior coatings, wood, paints, and graphic arts. view less | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| TEGO® VariPlus CA | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus CA is a hard, ketone-aldehyde condensation resin for solventborne coatings and printing inks that is delivered in the form of pellets. This product is used for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. Particularly for solventborne formulations, TEGO® VariPlus CA improves hardness, gloss, and blocking resistance as well as improving the adhesion...view more TEGO® VariPlus CA is a hard, ketone-aldehyde condensation resin for solventborne coatings and printing inks that is delivered in the form of pellets. This product is used for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. Particularly for solventborne formulations, TEGO® VariPlus CA improves hardness, gloss, and blocking resistance as well as improving the adhesion on aluminum, steel, and glass. view less | Request Sample |
| TEGO® VariPlus 1201 TF | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood and furniture coatings. TEGO® VariPlus 1201 TF improves hardness, gloss, and blocking resistance as well as the color strength of organic pigments and the adhesion...view more TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood and furniture coatings. TEGO® VariPlus 1201 TF improves hardness, gloss, and blocking resistance as well as the color strength of organic pigments and the adhesion on many plastics and aluminum. view less | Request Sample |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion...view more N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. view less | |
| Titanate FD-IAM | Zhejiang Feidian Chemical Co., Ltd. | Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion...view more Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion promotion and cross-linking properties resulting in improved water, solvent, and heat resistance, high reactivity during curing, low or no discoloration, and no release of acetylacetone. view less | |
| Terlon™ 605 A | Lawter | Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion...view more Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion. It is ideally suited for use in coldset, web heatset systems and metal decorating inks and varnishes. view less | |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less | Request Sample |
| EBECRYL® 4150 | Allnex | EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion...view more EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods. view less | Request Sample |
| Terlon™ 603 A | Lawter | Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The prod...view more Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The product has good color retention capabilities, making it ideal for use in heat-induced drying applications. It is suitable for use in coldset, web heatset, metal decorating inks and varnishes. view less | |
| AFCONA - 3770 | AFCONA Additives Sdn Bhd | AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion...view more AFCONA – 3770 is a fluorocarbon modified acrylic polymer. This clear to slightly yellow liquid functions as a leveling agent with anti-foam, anti-crater, and de-aeration properties while improving substrate wetting, and without interfering with intercoat adhesion. AFCONA – 3770 finds application in two-pack polyurethane and epoxy coatings, air-drying alkyd paints, baking enamels such as coil and can coatings, matt finish wood coatings, and in printing inks. view less | |
| SETALUX® 17-1246 | Allnex | SETALUX® 17-1246 is a fast-dry thermoplastic acrylic resin solution which provides an excellent balance of hardness, adhesion and film toughness together with clarity and transparency. SETALUX® 17-1246 may be utilized in a broad range of clear or pigmente...view more SETALUX® 17-1246 is a fast-dry thermoplastic acrylic resin solution which provides an excellent balance of hardness, adhesion and film toughness together with clarity and transparency. SETALUX® 17-1246 may be utilized in a broad range of clear or pigmented air-dry or force-dry general industrial finish coats. SETALUX® 17-1246 can be blended with other thermoplastic acrylic resins to adjust those resins to the balance of properties required. view less | Request Sample |
| EBECRYL® 8210 | Allnex | EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion...view more EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance, and dual cure coating systems. view less | Request Sample |
| UCECOAT® 7230 | Allnex | UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion...view more UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics. view less | Request Sample |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion...view more PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. view less | |
| Reactol™ 1979 A | Lawter | Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and ni...view more Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and nitrocellulose and can be cross-linked with melamine to create a glossy thermoset coating with good color retention. Reactol™ 1979 A is used in flexographic and gravure inks and in paper and wood coatings. view less | |
| Uniplex 260 | Rhein Chemie Rheinau GmbH | Uniplex 260 is a white solid consisting of glyceryl tribenzoate. This solid polyol benzoate heat-activatable plasticizer functions as a processing aid and modifier for a wide range of polymers. Uniplex 260 finds application in hot melt adhesives, in cellophane coatings to improve heat-seal properties without affecting film color and clarity, in nitrocellulose coatings, lacquers, and films requiring a moisture barrier, heat sealability, and adhesion...view more Uniplex 260 is a white solid consisting of glyceryl tribenzoate. This solid polyol benzoate heat-activatable plasticizer functions as a processing aid and modifier for a wide range of polymers. Uniplex 260 finds application in hot melt adhesives, in cellophane coatings to improve heat-seal properties without affecting film color and clarity, in nitrocellulose coatings, lacquers, and films requiring a moisture barrier, heat sealability, and adhesion, in printing inks and adhesives, and in metallic and pigmented surface coatings. view less | |
| EBECRYL® 3300 | Allnex | EBECRYL® 3300 is a highly reactive epoxy acrylate, diluted in DPGDA. When formulated and cross-linked with other suitable radiation curable oligomers and reactive diluents, it results in durable, hard-elastic and chemically resistant coating films of high quality. It is recommended for use in clear or pigmented coatings on metal substrates, and coatings for paper, paperboard, wood, chipboard and rigid plastics where a compromise between adhesion...view more EBECRYL® 3300 is a highly reactive epoxy acrylate, diluted in DPGDA. When formulated and cross-linked with other suitable radiation curable oligomers and reactive diluents, it results in durable, hard-elastic and chemically resistant coating films of high quality. It is recommended for use in clear or pigmented coatings on metal substrates, and coatings for paper, paperboard, wood, chipboard and rigid plastics where a compromise between adhesion, flexibility and hardness is necessary. view less | Request Sample |
| EBECRYL® 3600 | Allnex | EBECRYL® 3600 is an amine modified epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion...view more EBECRYL® 3600 is an amine modified epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion to plastics. It is recommended for use in: clear coatings for paper and plastic, wood topcoats, wood fillers and sealers, and screen inks and coatings view less | Request Sample |
| EBECRYL® 4883 | Allnex | EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 15% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). Films of EBECRYL® 4883 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion...view more EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 15% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). Films of EBECRYL® 4883 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with good exterior durability and resistance to yellowing. It is recommended for use in: post-formable coatings for metal tube and conduit, non-yellowing topcoats for wood, silkscreen inks for plastics, and exterior durable coatings. view less | Request Sample |
| TEGO® VariPlus AP | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus AP is a formaldehyde-free, solvent-free, ketone-aldehyde condensation resin delivered inthe form of pellets. This product improves gloss, hardness, and the adhesion on aluminum and steel. It also has great viscosity reduction and increase o...view more TEGO® VariPlus AP is a formaldehyde-free, solvent-free, ketone-aldehyde condensation resin delivered inthe form of pellets. This product improves gloss, hardness, and the adhesion on aluminum and steel. It also has great viscosity reduction and increase of solids content for industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. Delivered in the form of pellets, use of TEGO® VariPlus AP increases drying speed and builds resistance to mineral oil. view less | Request Sample |
| SETAL® 21-3469 | Allnex | SETAL 21-3469 is a flexible high-solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion...view more SETAL 21-3469 is a flexible high-solids long-oil alkyd resin designed for use in color retentive, durable, exterior grade trade sales paints. This resin is frequently used as a modifier for acrylic and polyvinyl acrylate-based latex paints to improve adhesion over chalky substrates. SETAL 21-3469 also improves brushing qualities of medium and long oil based house paints. SETAL 21-3469 is a HAPS-free version of SETAL 21-3461. view less | Request Sample |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion...view more Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. view less | |
| EBECRYL® 745 | Allnex | EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDODA) and tripropylene glycol diacrylate (TRPGDA). It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion...view more EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDODA) and tripropylene glycol diacrylate (TRPGDA). It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates. EBECRYL® 745 is recommended for: silk screen inks, coatings on plastics, and adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, etc. view less | Request Sample |
| EBECRYL® 810 | Allnex | EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films cured by UV or EB demonstrate surface hardness, chemical resistance and generally good adhesion. It is particularly suited to application methods requiring...view more EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films cured by UV or EB demonstrate surface hardness, chemical resistance and generally good adhesion. It is particularly suited to application methods requiring low viscosity such as solventless spray and vacuum coating. It is recommended for: coatings for paper, wood and plastics, paper upgrading, vacuum applied coatings, flexographic inks, EB cure paper-foil laminating adhesives, and solventless spray and flow coater applications. view less | Request Sample |
| RESAMIN® HF 480 | Allnex | Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion...view more Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability. view less | Request Sample |
| Unithane IC-105 | Union Specialties, Inc. | Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications that require good gloss, chemical resistance and adhesion...view more Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications that require good gloss, chemical resistance and adhesion to a variety of substrates. It can also be used in flooring coatings, paints, graphic arts and inks, and wood coatings. view less | |
| Terlon™ 613 A | Lawter | Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion...view more Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion and transfer as well as tack stability. It is suitable for use in web heatset, varnishes, metal decorating inks and coldset systems. view less | |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...view more SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. view less | Request Sample |
| SETAQUA® 37-6704 | Allnex | SETAQUA 37-6704 is an all acrylic emulsion which has been developed utilizing our patented gradient morphology technology. SETAQUA 6704 contains APE-free stabilizers that assist in retaining viscosity on tinting, excellent thickener response and enhance the exterior durability of the emulsion. Adhesion...view more SETAQUA 37-6704 is an all acrylic emulsion which has been developed utilizing our patented gradient morphology technology. SETAQUA 6704 contains APE-free stabilizers that assist in retaining viscosity on tinting, excellent thickener response and enhance the exterior durability of the emulsion. Adhesion under wet or dry conditions to chalky, hydrophobic surfaces is outstanding and a good balance of in-can and application properties can be achieved due to compatibility with a wide range of additives. view less | Request Sample |
| EBECRYL® 8411 | Allnex | EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion...view more EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing. It is recommended for use in: screen inks for plastics, screen inks for lamination, thermoformable screen inks, coatings for metal, wood, paper and plastics, and coatings requiring exterior durability. view less | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion...view more EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. view less | Request Sample |
| NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion...view more NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has improved dirt shedding. view less | Request Sample |
| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion...view more Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion...view more Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion...view more Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| EBECRYL® 875 | Allnex | EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, p...view more EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates. EBECRYL® 875 also exhibits low odor. view less | Request Sample |
| EBECRYL® 1271 | Allnex | EBECRYL® 1271 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1271.) Films of EBECRYL® 1271 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion...view more EBECRYL® 1271 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1271.) Films of EBECRYL® 1271 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing. view less | Request Sample |
| EBECRYL® 445 | Allnex | Ebecryl®445 is a chlorinated polyester resin diluted with 40% of trimethylolpropane triacrylate (TMPTA) monomer. Ebecryl®445 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on Ebecryl 445, display good adhesion...view more Ebecryl®445 is a chlorinated polyester resin diluted with 40% of trimethylolpropane triacrylate (TMPTA) monomer. Ebecryl®445 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on Ebecryl 445, display good adhesion to metals, plastics and paper. Ebecryl®445 can be diluted with reactive monomers such as trimethylolpropane triacrylate (TMPTA), oligotriacrylate (OTA 480), tripropyleneglycol diacrylate (TPGDA) and 1,6 hexanediol diacrylate (HDDA). The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility. view less | Request Sample |
| NQ SYSTEM | Companhia Nitro Quimica Brasileira | NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, customers will also find a wide variety of products tailored to the characteristics and applications of their industry segments. The use of plasticizers imparts greater elasticity to nitrocellulose, while improving the adhesion...view more NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, customers will also find a wide variety of products tailored to the characteristics and applications of their industry segments. The use of plasticizers imparts greater elasticity to nitrocellulose, while improving the adhesion of paints and coatings to the substrates to which they are applied. view less | |
| Hydro-Rez™ 3886 A | Lawter | Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hyd...view more Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hydro-Rez™ 3886 A can also be used is SS nitrocellulose-based lacquer systems if the solvents are to be based on alcohols. Further usage of the product is in carton and specialty inks, spirit varnishes and shellac substitutes. view less | |
| Silane Coupling Agent KH-792 | Zhejiang Feidian Chemical Co., Ltd. | KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (co...view more KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker(moisture crosslinking of polymers). The application as coupling agent leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Silver White Series KC163 | Fuzhou Kuncai Fine Chemicals Co., Ltd. | Silver White Series KC163 is a free flowing, odorless, off white colored powder with a silver luster. Automotive Pearlescent Pigment is broadly applied in autos, has a metallic luster and color effect, with narrow particle size distribution, high adhesion...view more Silver White Series KC163 is a free flowing, odorless, off white colored powder with a silver luster. Automotive Pearlescent Pigment is broadly applied in autos, has a metallic luster and color effect, with narrow particle size distribution, high adhesion, easy dispersion, environmental friendly, and excellent outdoor application function. Silver White Series KC163 has a pH of 7.0 to 11.0, a particle size 80% within the range of 40 to 200 µm, and a density of 2.8 to 3.4 g/cm3. view less | |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion...view more TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion on many plastics such as PC, ABS, PS, PA, PMMA, PVC, Noryl. view less | Request Sample |
| TEGO® VariPlus SK | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus SK is a hard polyol resin for solventborne coatings and printing inks. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. TEGO® VariPlus SK has high light and heat resistance and improves the hardness, gloss, and blocking resistance. It also improves the color strength of organic pigments and the adhesion...view more TEGO® VariPlus SK is a hard polyol resin for solventborne coatings and printing inks. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. TEGO® VariPlus SK has high light and heat resistance and improves the hardness, gloss, and blocking resistance. It also improves the color strength of organic pigments and the adhesion on many plastics and metals. It increases drying speed and may increase the solids content. view less | Request Sample |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less | |
| EBECRYL® 8311 | Allnex | EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion...view more EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, coatings requiring low development after abrasion resistance, and as a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance. view less | Request Sample |
| Titanate Coupling Agent FD-TPT | Zhejiang Feidian Chemical Co., Ltd. | FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a crosslinking agent for various polymers or resins in coating and paint. It improves adhesive bonding between coating and substrate as well as improves dispersion, coloring, and anti-corrosion. It is also used as surface modifier, adhesion...view more FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a crosslinking agent for various polymers or resins in coating and paint. It improves adhesive bonding between coating and substrate as well as improves dispersion, coloring, and anti-corrosion. It is also used as surface modifier, adhesion promoter, and additive for paraffin and oil. view less |
