| SETALUX® D A 1060 BA | Allnex | SETALUX® D A 1060 BA is used in the formulation of air-drying and stoving automotive refinish and industrial coatings. | Request Sample |
| EBECRYL® 4744 | Allnex | EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with o...view more EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with other binders to set specific properties. EBECRYL® 4744 is used in the formulation of UV/EB coatings for wood, furniture, paper, parquet and films applied by roll, spray and curtain coating processes. view less | Request Sample |
| EBECRYL® 4266 | Allnex | EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...view more EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. view less | Request Sample |
| SETALUX® D A 160 SN | Allnex | Setalux D A 160 SN polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N, in the formulation of two-component polyurethane coatings with good lightfastness and resistance to chalking. | Request Sample |
| SETALUX® D A 960 SN | Allnex | Setalux D A 960 SN is a polyisocyanate cross-linking acrylic resin used in combination usually with Desmodur® N grades for the formulation of two-component olyurethane coatings with good light fastness and chalking resistance. | Request Sample |
| SETALUX® D A 575 X | Allnex | Setalux D A 575 X is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N grades, in the formulation of two-component polyurethane coatings with good resistance to accelerated and outdoor weathering. | Request Sample |
| SETALUX® D A 265 BA | Allnex | Setalux D A 265 BA is a polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N 75 or N 3390, in the formulation of two-component polyurethane coatings with good gloss retention, light fastness and resistance to chalking. | Request Sample |
| SETALUX® D A 365 BA/X | Allnex | Setalux D A 365 BA/X is a polyisocyanate cross-linking acrylic resin usually used in combination with Desmodur® N 75 and N 3390, in the formulation of two-component poylurethane coatings with excellent gloss retention, light fastness and chalking resistan...view more Setalux D A 365 BA/X is a polyisocyanate cross-linking acrylic resin usually used in combination with Desmodur® N 75 and N 3390, in the formulation of two-component poylurethane coatings with excellent gloss retention, light fastness and chalking resistance. view less | Request Sample |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...view more Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. view less | Request Sample |
| MACRYNAL® SM 6826w/43WA | Allnex | Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when ...view more Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when used in combination with water-emulsifiable polyisocyanates. view less | Request Sample |
| VIACRYL® SC 303/60BAC | Allnex | Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combina...view more Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combination with cellulose acetobutyrate (CAB) for basecoats in two-coat metallics. view less | Request Sample |
| EBECRYL® 4683 | Allnex | EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces h...view more EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces hard, tough coatings particularly suited for protective coating on metal. view less | Request Sample |
| EBECRYL® 4220 | Allnex | EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application...view more EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...view more EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| RESYDROL® AY 241w/40WA | Allnex | Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are cha...view more Resydrol® AY 241W/40WA is an oxidatively drying alkyd-acrylic copolymer emulsion that exhibits extremely rapid initial drying and very good water resistance. It can be used as a sole binder for the formulation of primers and primer-surfacers which are characterized by very rapid drying and therefore can be used for recoating after a short time of drying. view less | Request Sample |
| EBECRYL® 4680 | Allnex | EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coa...view more EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film. view less | Request Sample |
| SETATHANE® E 2017 | Allnex | SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and res...view more SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and resistance to organic and inorganic acids, and solvents. Overcrosslinking of 400% or more is typical. No additional water or solvent should ever be added to this. view less | Request Sample |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| Lucidene 395 | Hydrite Chemical Co. | Lucidene 395 is a high gloss and holdout emulsion designed especially for overprint varnish formulations. | |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...view more EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. view less | Request Sample |
| Dispersion EA – 419 F2 | Opalion | Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the f...view more Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the formulations with unparalleled gloss, hardness, adhesion and resistance to agents cleaners. view less | |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...view more EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. view less | Request Sample |
| EBECRYL® 4513 | Allnex | EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formula...view more EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing. view less | Request Sample |
| VIACRYL® VSC 6279w/45WA | Allnex | VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It...view more VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It can even be used to formulate non yellowing decorative finishing systems with excellent outdoor durability and UV resistance. view less | Request Sample |
| EBECRYL® 4740 | Allnex | EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740...view more EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740 are characterized by very good chemical and mechanical resistances, scratch resistance, abrasion resistance and high resistance to yellowing. view less | Request Sample |
| HydriPrint 335 | Hydrite Chemical Co. | HydriPrint 335 is a hard but flexible polymer formulated to provide good grease and water resistance. This product is well suited for use in overprint varnishes. | |
| HydriPrint 376 | Hydrite Chemical Co. | HydriPrint 376 is a hard film forming polymer formulated for fast drying and good resolubility. This product is well suited for use in water-based inks. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| SETALUX® 27-1597 | Allnex | SETALUX® 27-1597 is an acrylic polyol for use in combination with aliphatic polyisocyanates. When properly formulated, this resin will offer ease of application, very good film properties and superior outdoor exposure performance. | Request Sample |
| EBECRYL® 4738 | Allnex | EBECRYL® 4738 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4738 exhibit high reactivity and result in hard coatings. | Request Sample |
| Lucidene 603 | Hydrite Chemical Co. | Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment disp...view more Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment dispersions. view less | |
| VIACRYL® VSC 5745 | Allnex | Viacryl® VSC 5745 is a hard-elastic adjusted basis resin for high-grade two-component thick-layer roadmarking paints with very good weather and abrasion resistance. If formulated properly you may achieve excellent levelling and satisfactory settling. | Request Sample |
| SETAQUA® 6766 | Allnex | SETAQUA® 6766 is a self-crosslinking acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented and clear coatings. Coatings formulated with SETAQUA® 6766 exhibit high gloss, good application properties, excellent blocking ...view more SETAQUA® 6766 is a self-crosslinking acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented and clear coatings. Coatings formulated with SETAQUA® 6766 exhibit high gloss, good application properties, excellent blocking and chemical resistance. view less | Request Sample |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...view more Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. view less | |
| SETALUX® 27-1026 | Allnex | SETALUX® 27-1026 acrylic polyol provides ease of coating application, good adhesion and good flexibility when crosslinked with aliphatic isocyanates. Coatings formulations with this resin exhibit superior flow, gloss, gloss retention, corrosion resistance...view more SETALUX® 27-1026 acrylic polyol provides ease of coating application, good adhesion and good flexibility when crosslinked with aliphatic isocyanates. Coatings formulations with this resin exhibit superior flow, gloss, gloss retention, corrosion resistance and other high performance properties. view less | Request Sample |
| SETAQUA® 37-3372 | Allnex | SETAQUA® 37-3372 (formerly SETAQUA® 6472) is an acrylic copolymer emulsion for industrial air dry enamels and maintenance primers. Coatings formulated with SETAQUA® 37-3372 exhibit excellent adhesion properties, exterior durability and good stain and wate...view more SETAQUA® 37-3372 (formerly SETAQUA® 6472) is an acrylic copolymer emulsion for industrial air dry enamels and maintenance primers. Coatings formulated with SETAQUA® 37-3372 exhibit excellent adhesion properties, exterior durability and good stain and water resistance. view less | Request Sample |
| SETALUX® D A 160 X | Allnex | SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather s...view more SETALUX® D A 160 X is an acrylic polyol with 2.7% OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather stability and good resistance to water, washing solutions and chemicals. view less | Request Sample |
| SETALUX® 17-1450 | Allnex | SETALUX® 17-1450 is a higher solids acetoacetate modified acrylic resin for use in combination with the higher active concentration SETALUX® 10-1440 in the isocyanate-free 3.5 VOC Ketac primer system. Lower VOC formulations are obtainable through the use ...view more SETALUX® 17-1450 is a higher solids acetoacetate modified acrylic resin for use in combination with the higher active concentration SETALUX® 10-1440 in the isocyanate-free 3.5 VOC Ketac primer system. Lower VOC formulations are obtainable through the use of exempt solvents or reactive diluents. view less | Request Sample |
| Thix Carboxi | Opalion | Thix Carboxi is a neutralized acrylic associative high viscosity thickener. Acrylic thickeners dissolve better than cellulosic thickeners but if not well formulated down water resistance and fail compared to cations. Thix Carboxi neutralized has a high vi...view more Thix Carboxi is a neutralized acrylic associative high viscosity thickener. Acrylic thickeners dissolve better than cellulosic thickeners but if not well formulated down water resistance and fail compared to cations. Thix Carboxi neutralized has a high viscosity and high molecular weight and relatively low functionality are the key to their effectiveness. view less | |
| SETATHANE® E 2000 | Allnex | SETATHANE® E 2000 is a polyol emulsion used for industrial grade floor coatings. When properly formulated, SETATHANE® E 2000 produces a floor system that is hard and durable, resistant to impact, abrasion, thermal shock and chemicals/ food acids, yet is n...view more SETATHANE® E 2000 is a polyol emulsion used for industrial grade floor coatings. When properly formulated, SETATHANE® E 2000 produces a floor system that is hard and durable, resistant to impact, abrasion, thermal shock and chemicals/ food acids, yet is non-porous, hygienic and easily cleaned. view less | Request Sample |
| EBECRYL® 4491 | Allnex | EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by ...view more EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by very high flexibility and elongation at break. Cured films display rubber-elastic properties. view less | Request Sample |
| UCECOAT® 7200 | Allnex | UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV r...view more UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solid content and/or hardness property. view less | Request Sample |
| Dispersion Elastomerica Coloidal DZ 1 | Opalion | Dispersion Elastomerica Coloidal DZ 1 has a breakthrough with an elastic film and very low tack residual. The formulations of acrylic polymer films have been limited by the very technology inherent basic monomers for free elastic films stickiness. This pr...view more Dispersion Elastomerica Coloidal DZ 1 has a breakthrough with an elastic film and very low tack residual. The formulations of acrylic polymer films have been limited by the very technology inherent basic monomers for free elastic films stickiness. This product has applications in varnishes, woods, varnishes for bricks and does not cause oxidation on metals. view less | |
| G-CURE™ 17-0105 | Allnex | G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Formulation...view more G-Cure® 17-0105 (formerly G-Cure® 105P70) acrylic resin is designed for high build, higher volume solids acrylic urethane topcoats and primers. It will react at room temperature with aliphatic polyisocyanates to give excellent application properties. Formulations can be designed for high gloss, lower solvent industrial maintenance coatings. view less | Request Sample |
| G-CURE™ 17-0806 | Allnex | G-Cure® 17-0806 (formerly G-Cure® 806BL60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0806 exhibit...view more G-Cure® 17-0806 (formerly G-Cure® 806BL60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0806 exhibit outstanding durability, chemical resistance and color retention. view less | Request Sample |
| SETALUX® 17-2319 | Allnex | SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator...view more SETALUX® 17-2319 is a hydroxy functional acrylic polyol, which has excellent adhesion to all the common metal substrates like cold rolled steel, stainless steel, aluminum, galvanized surface, etc. It is HAPs-free and contains PCBTF. This allows formulator to make very low VOC direct-to-metal (DTM) primer. view less | Request Sample |
| SETALUX® 27-1461 | Allnex | SETALUX® 27-1461 is a hydroxyl-functional acrylic polyol for 2K vehicle refinish clear coats and industrial topcoats. Coatings formulated with SETALUX® 27-1461 exhibit good overall performance properties. Key properties include fast dry, high build and gl...view more SETALUX® 27-1461 is a hydroxyl-functional acrylic polyol for 2K vehicle refinish clear coats and industrial topcoats. Coatings formulated with SETALUX® 27-1461 exhibit good overall performance properties. Key properties include fast dry, high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability. view less | Request Sample |
| SETALUX® D A XP 2588 | Allnex | SETALUX® D A XP 2588 is a hydroxyl-functional acrylic polyol that is a co-reactant with hexamethylene diisocyanate based polyisocyanates to formulate air-and force-dry two-component polyurethane coatings with good light stability, chalking resistance and ...view more SETALUX® D A XP 2588 is a hydroxyl-functional acrylic polyol that is a co-reactant with hexamethylene diisocyanate based polyisocyanates to formulate air-and force-dry two-component polyurethane coatings with good light stability, chalking resistance and gloss retention. The cured paint films are hard, tough but flexible, glossy and high-bodied with good resistance to solvents and gasoline. view less | Request Sample |
| EBECRYL® 893 | Allnex | EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. The low viscosity of EBECRYL® 893 also provides latitude to achieve low viscosity formulations, whi...view more EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. The low viscosity of EBECRYL® 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. It is recommended for use in UV curable field applied concrete and VCT coatings. view less | Request Sample |
| EBECRYL® 876 | Allnex | EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL® 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing e...view more EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL® 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing equivalent performance properties such as fast cure response, high gloss, hardness and excellent chemical resistance. view less | Request Sample |
| VIACRYL® VSC 6324/46BAC | Allnex | Viacryl® VSC 6324/46BAC is a physically drying acrylic resin. It is suited to formulate rapid drying industrial coating systems with good gloss retention. Its high petroleum resistance makes it suitable for use in automotive coatings for repair finishes. ...view more Viacryl® VSC 6324/46BAC is a physically drying acrylic resin. It is suited to formulate rapid drying industrial coating systems with good gloss retention. Its high petroleum resistance makes it suitable for use in automotive coatings for repair finishes. Cured films based on Viacryl VSC 6324/46BAC are outdoor durable and show good non-yellowing properties. view less | Request Sample |
| EBECRYL® 4765 | Allnex | EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing...view more EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process; UV/EB induced polymerization and NCO/OH reaction. view less | Request Sample |
| SETALUX® 57-1460 | Allnex | SETALUX® 57-1460 is a HAPs - free hydroxyl-functional acrylic polyol for 2K vehicle refinish clear coats and industrial topcoats. Coatings formulated with SETALUX® 57-1460 exhibit good overall performance properties. Key properties include fast dry, high ...view more SETALUX® 57-1460 is a HAPs - free hydroxyl-functional acrylic polyol for 2K vehicle refinish clear coats and industrial topcoats. Coatings formulated with SETALUX® 57-1460 exhibit good overall performance properties. Key properties include fast dry, high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability. view less | Request Sample |
| SETAQUA® 6770 | Allnex | SETAQUA® 6770 is an acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented wood coatings for the joinery industry. Coatings formulated with this product exhibit high gloss, good application properties and excellent bloc...view more SETAQUA® 6770 is an acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented wood coatings for the joinery industry. Coatings formulated with this product exhibit high gloss, good application properties and excellent blocking resistance. This particular resin is designed with gradient particle morphology. It is ideal for topcoats and pigmented enamels, and air-dry coatings for interior and exterior pigmented wood finishes. view less | Request Sample |
| SETALUX® 10-1440 | Allnex | SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester resin. Even lower VOC formulation...view more SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester resin. Even lower VOC formulations are obtainable through use of exempt solvents and / or reactive diluents. view less | Request Sample |
| EBECRYL® 4150 | Allnex | EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure proc...view more EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods. view less | Request Sample |
| G-Cure® 17-0807 | Allnex | G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit ou...view more G-CURE 17-0807 (formerly G-CURE 806PT60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-CURE 17-0807 exhibit outstanding durability, chemical resistance and color retention. Coatings produced with G-CURE 17-0807 are suitable for metal, wood and plastic, particularly when heat sensitivity is a concern. view less | Request Sample |
| G-CURE™ 17-0866 | Allnex | G-Cure® 17-0866 (formerly G-Cure® 867PX60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0866 exhibit...view more G-Cure® 17-0866 (formerly G-Cure® 867PX60) acrylic resin is a hydroxyl functional acrylic copolymer designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0866 exhibit outstanding durability, chemical resistance and color retention. Coatings produced with G-Cure® 17-0866 are suitable for metal, wood and plastic, or heat sensitivesubstrates. view less | Request Sample |
| G-CURE™ 17-0870 | Allnex | G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast ...view more G-Cure® 17-0870 (formerly G-Cure® 870BLX50) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance coatings. Coatings formulated with G-Cure® 17-0870 have fast lacquer-like dry, but provide long pot life due to controlled reactivity. The cured films exhibit excellent durability and good chemical resistance. view less | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formul...view more EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4510 | Allnex | EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It...view more EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods. view less | Request Sample |
| G-CURE™ 17-0868 | Allnex | G-CURE™ 17-0868 (formerly G-CURE™ 868PWF60) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance flexible coatings. Coatings formulated with G-CURE™ 17-0868 e...view more G-CURE™ 17-0868 (formerly G-CURE™ 868PWF60) acrylic resin is a hydroxyl functional acrylic resin designed to react at room temperature with aliphatic polyisocyanates to produce high performance flexible coatings. Coatings formulated with G-CURE™ 17-0868 exhibit excellent durability, chemical resistance and color retention. G-CURE™ 17-0868 is designed for use on flexible or semi-rigid substrates or as a flexibilizer for other polyols that need to maintain excellent durability and chemical resistance. view less | Request Sample |
| EBECRYL® 4859 | Allnex | EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Due to a low intrinsic viscosity, EBECRYL® 4859 of...view more EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Due to a low intrinsic viscosity, EBECRYL® 4859 offers ease of formulating in energy curable systems that are low in viscosity with high oligomer content. Films of EBECRYL® 4859 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, optically clarity, low color and good impact resistance. view less | Request Sample |
| Acrylic Polyol Resin Spolyol 608 | Suny Chem | Spolyol 608 is acrylic- modified polyester polyol resin. It offers good leveling wettability, fullness, dispersibility and fast drying, weatherability, and chemical resistance. It has good adhesion on a variety of substrates. This product is recommended f...view more Spolyol 608 is acrylic- modified polyester polyol resin. It offers good leveling wettability, fullness, dispersibility and fast drying, weatherability, and chemical resistance. It has good adhesion on a variety of substrates. This product is recommended for 2KPU high gloss, bright-colored finishing coat. It is polymerized through chemical grafting and has a wide range of compatibility, can be used to produce a universal color paste. Spolyol 608 has a very good leveling wettability, can be applied for car refinishing paint, metal baking paint and top grade nitro-decorative paint. It can also be used as a co-reactant with polyisocyanate to formulate self-drying double-component coatings. view less |
