| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistan...view more ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistance, bonding strength, film forming capacity and adhesion to the products it is applied to. view less | Request Sample |
| Borchi® Coll 10 | OMG Borchers GmbH | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | OMG Borchers GmbH | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | OMG Borchers GmbH | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | OMG Borchers GmbH | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BYK®-300 | BYK | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | |
| BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less | |
| BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| BYK®-370 | BYK | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| EFKA® SL 3031 | BASF Formulation Additives | EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to a...view more EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to air-draughts. EFKA® SL 3031 is compatible with all medium- to high-polarity solventbased systems. In unsaturated polyesters, e.g., UV-curable, EFKA® SL 3031 improves slip and smoothness of the surface with no influence on curtain stability when applied by curtain coating. The sensitivity to air drafts when sprayed or poured will be reduced by EFKA® SL 3031. This product also improves leveling and mar resistance and acts as an antiblocking agent. This is particularly advantageous in PUR systems based on hydroxyl acrylics. Due to its high surface activity, EFKA® SL 3031 can interfere with intercoat adhesion when recoated without sanding. If air is introduced by the application equipment, small amounts of defoamers such as EFKA® PB 2020 and EFKA® SI 2022 should be added. view less | |
| Efka® SL 3888 | BASF Formulation Additives | Efka® SL 3888 (formerly Efka® 3888) slip & leveling agent designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates, e.g., Basonat® grades. The addition of Efka® SL 3888 into polyurethane lacquers or coatings offer...view more Efka® SL 3888 (formerly Efka® 3888) slip & leveling agent designed to crosslink with hydroxyl or carboxyl groups. It is compatible with most polyisocyanates, e.g., Basonat® grades. The addition of Efka® SL 3888 into polyurethane lacquers or coatings offers: improved leveling, reduced tendency for orange peel effect or cratering, and improved slip and surface smoothness. These improvements are more permanent as the additives crosslink and are part of the final film. It also offers reduced surface tension with little or no foam formation and prevention of Bénard cells (anti-floating effect). view less | |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ DMAC-ST is colloidal silica mono-dispersed in the organic solvent N,N-Dimethyl acetamide . It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ EG-ST is colloidal silica mono-dispersed in the organic solvent ethylene glycol. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many o...view more ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many...view more ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | A colloidal silica dispersed in organic solvent. It is used to significantly improve the scratch, chip, and mar resistance of plastics, films, paints, varnishes, and inks. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and ha...view more ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints an...view more ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many othe...view more ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints ...view more ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics,...view more ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high visco...view more SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high viscosity <20 mPa•s. This product is stabilized in IPA. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other application...view more SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other applications for SNOWTEX® ST-20L include a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatment. view less | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings,...view more SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-50 | Nissan Chemical America Corporation | SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory,...view more SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-C | Nissan Chemical America Corporation | SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorg...view more SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| SNOWTEX® ST-N | Nissan Chemical America Corporation | SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic f...view more SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| SNOWTEX® ST-O | Nissan Chemical America Corporation | SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints...view more SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-O-UP | Nissan Chemical America Corporation | SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface...view more SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-OL | Nissan Chemical America Corporation | SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface tre...view more SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-PS-M | Nissan Chemical America Corporation | SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment ...view more SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-MO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applicat...view more SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-S | Nissan Chemical America Corporation | SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, bi...view more SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-SO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder f...view more SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-UP | Nissan Chemical America Corporation | SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals,...view more SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| SNOWTEX® ST-ZL | Nissan Chemical America Corporation | SNOWTEX® ST-ZL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The particle size of this product is at 90 µm. | Request Sample |
| WorléeAdd 1500 | Worlée-Chemie G.m.b.H. | WorléeAdd 1500 is a dimethylsiloxane additive for use in gravure inks, offset printing inks, and overprint inks. It is a viscous liquid water white/slightly yellowish substance. This product is soluble in mineral oil, aliphatic and aromatic hydrocarbons. |
