| ADDITOL® P 791 | Allnex | ADDITOL® P 791 is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed. | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistan...view more ALUMINASOL™ AS-200 is a colloidal hydrous alumina with many applications for catalysts, fiberglass, fabrics, textiles and synthetic fibers. AS-200 has a lower viscosity at 20°C than that of AS-100. ALUMINASOL™ can add anti-static properties, heat resistance, bonding strength, film forming capacity and adhesion to the products it is applied to. view less | Request Sample |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| BECKOPOX™ E 04643 | Allnex | BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYL...view more BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. view less | Request Sample |
| BECKOPOX™ E 04649 | Allnex | BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend...view more BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF. view less | Request Sample |
| BECKOPOX™ E 04743 | Allnex | BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYL...view more BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF. view less | Request Sample |
| BECKOPOX™ EH 2162w/75WA | Allnex | BECKOPOX™ EH 2162w/75WA is an aliphatic polyamine adduct. It's also a hardener for water-reducible coatings on mineral and metallic substrates. | Request Sample |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...view more Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. view less | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...view more BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. view less | Request Sample |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...view more Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. view less | |
| CERAFLOUR® 920 For Powder | BYK | CERAFLOUR® 920 For Powder is an additive to improve surface hardness of UV powder coatings. It is composed of a micronized organic polymer. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics....view more CERAFLOUR® 920 For Powder is an additive to improve surface hardness of UV powder coatings. It is composed of a micronized organic polymer. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. The additive yields excellent surface protection and matting. In combination with CERAFLOUR® 950 (see data sheet H31) it is recommended for UV powder coatings. view less | |
| CHS-Hardener P 11 | Spolchemie | CHS-Hardener P 11 is an amine hardener for epoxy resins. It is a universal type of hardener for CHS-Epoxy resins. The mixture is made up of polyalkylene polyamines and it contains mostly diethylenetriame. CHS-Hardener P 11 is primarily used as an additive...view more CHS-Hardener P 11 is an amine hardener for epoxy resins. It is a universal type of hardener for CHS-Epoxy resins. The mixture is made up of polyalkylene polyamines and it contains mostly diethylenetriame. CHS-Hardener P 11 is primarily used as an additive to epoxy resin systems to help them cure, it is also in the production of adhesives. view less | |
| DESMODUR® XP 2838 | Covestro | Desmodur® XP 2838 is used primarily as the hardener component for light-fast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are ...view more Desmodur® XP 2838 is used primarily as the hardener component for light-fast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are polyacrylate or polyester polyols. The main applications for systems based on Desmodur® XP 2838 are air- and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. view less | |
| DESMODUR® XP 2840 | Covestro | Desmodur® XP 2840 is an aliphatic polyisocyanate based on hexamethylene diisocyanate. It is used as the hardener component for lightfast, weather-stable coating systems. As a particularly low-viscosity polyisocyanate, Desmodur® XP 2840 is well suited for ...view more Desmodur® XP 2840 is an aliphatic polyisocyanate based on hexamethylene diisocyanate. It is used as the hardener component for lightfast, weather-stable coating systems. As a particularly low-viscosity polyisocyanate, Desmodur® XP 2840 is well suited for the formulation of high-solids coatings for general industrial coating, automotive refinishing, transportation and plastics coating applications. view less | |
| Docure KC-305H | Kukdo Chemical Co., Ltd. | Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...view more Docure KC-305H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. This cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. view less | |
| Docure KC-335H | Kukdo Chemical Co., Ltd. | Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it ...view more Docure KC-335H of casting resin system is a liquid type medium viscosity bisphenol-A epoxy resin and medium-viscosity hardener, respectively. this cured resin gives outstanding resistance to mechanical and electrical stresses and thermal shocks. Also, it shows excellent long-term behavior in terms with breakdown strength and discharge resistance. view less | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-506 | Kukdo Chemical Co., Ltd. | Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures. | |
| Docure KH-531 | Kukdo Chemical Co., Ltd. | Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the lam...view more Docure KH-531 is an aliphatic amine modified hardener. KH-531 has low viscosity and the properties of light color and good color stability after curing. It is well suited for use in the production of solvent free coatings and other applications in the laminating industries. view less | |
| Docure KH-550 | Kukdo Chemical Co., Ltd. | Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in ...view more Docure KH-550 is an aliphatic amine modified hardener. KH-550 has low viscosity and solvent free. It could be accelerator for other curing agents and give thixotropies to resins, which is suitable to use on vertical surfaces. It is well suited for use in injection systems and the production of solvent free coatings. view less | |
| Docure KH-602 | Kukdo Chemical Co., Ltd. | Docure KH-602 is an aliphatic amine modified hardener. KH-602 can be used as solvent free system due to low viscosity. It can be used for Injection systems and resin mortars. In addition it is well suited for use as an accelerator for other curing agents. | |
| Docure KH-620 | Kukdo Chemical Co., Ltd. | Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemica...view more Docure KH-620 is an aliphatic amine modified hardener. KH-620 can be used as solvent free system due to low viscosity. KH-620 gives excellent chemical resistance to organic solvents, particularly alcohols after curing. It is well suited for use in chemical processing equipment, tank linings and maintenance coatings. view less | |
| Dodecanedioic Acid (DDA) | UBE Chemical Europe | Dodecanedioic Acid is used as a raw material for polyurethane, polyester, and polyamide resins, as well as a hardener for acrylic powder paints. When reacted with various alcohols and diamines, DDA produces polyester and polyamide resins with excellent pe...view more Dodecanedioic Acid is used as a raw material for polyurethane, polyester, and polyamide resins, as well as a hardener for acrylic powder paints. When reacted with various alcohols and diamines, DDA produces polyester and polyamide resins with excellent performance, especially in hydrolytic resistance, flexibility, and heat stability. view less | |
| Domide GX-328B75 | Kukdo Chemical Co., Ltd. | Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curi...view more Domide GX-328B75 is a polyamide / epoxy adduct dissolved in n-Butanol for reaction with solid epoxy resins. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. view less | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...view more Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...view more Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-450TI60 | Kukdo Chemical Co., Ltd. | Domide GX-450TI60 is a Polyamide / Epoxy adduct dissolved in Toluene/Iso-propanol for reaction with solid Epoxy Resins. GX-450TI60 is useful in maintenance coatings and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-450XB70 | Kukdo Chemical Co., Ltd. | Domide GX-450XB70 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-450XB70 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin. | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...view more Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. view less | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...view more Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. view less | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...view more Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. view less | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...view more Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. view less | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...view more Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. view less | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesive...view more Easaqua™ WAT-4 is a water-dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT. This product is used as a crosslinker of waterborne adhesives for shoes and wood to obtain D4 classification according to EN 204. It is also suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery, and accessory leather products as well as for 3D lamination applications in the automotive and furniture industries. view less | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...view more Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. view less | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...view more Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. view less | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...view more Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. view less | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| HS2266 | Tianyi Chemical Engineering Material Co., Ltd. | HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. Th...view more HS2266, in the form of a light yellow, viscous liquid, is a water-based epoxy hardening agent that can be used in thick and thinned self-leveling coatings, mortar flooring coatings, metal corrosion-resistant paint, and modified cement mortar coatings. This product has a pH value between 8.0 and 9.0. It has a density between 1.08 and 1.12 g/cm3. view less | |
| HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...view more HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. view less | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...view more Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. view less | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...view more Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. view less | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...view more Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. view less | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...view more Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. view less | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...view more Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. view less | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...view more Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. view less | |
| ORGANOSILICASOL™ DMAC-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ DMAC-ST is colloidal silica mono-dispersed in the organic solvent N,N-Dimethyl acetamide . It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ EG-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ EG-ST is colloidal silica mono-dispersed in the organic solvent ethylene glycol. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. | Request Sample |
| ORGANOSILICASOL™ IPA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many o...view more ORGANOSILICASOL™ IPA-ST is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-L | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many...view more ORGANOSILICASOL™ IPA-ST-L is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-50 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-UP | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-UP is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 40-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ IPA-ST-ZL | Nissan Chemical America Corporation | ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has ma...view more ORGANOSILICASOL™ IPA-ST-ZL is colloidal silica mono-dispersed in the organic solvent isopropanol with a particle size of 70-100 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MA-ST-MS | Nissan Chemical America Corporation | A colloidal silica dispersed in organic solvent. It is used to significantly improve the scratch, chip, and mar resistance of plastics, films, paints, varnishes, and inks. | Request Sample |
| ORGANOSILICASOL™ MEK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and ha...view more ORGANOSILICASOL™ MEK-ST is colloidal silica mono-dispersed in the organic solvent methyl ethyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MIBK-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints an...view more ORGANOSILICASOL™ MIBK-ST is colloidal silica mono-dispersed in the organic solvent methyl isobutyl ketone with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ MT-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many othe...view more ORGANOSILICASOL™ MT-ST is colloidal silica mono-dispersed in the organic solvent methanol with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ NPC-ST-30 | Nissan Chemical America Corporation | ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints ...view more ORGANOSILICASOL™ NPC-ST-30 is colloidal silica mono-dispersed in the organic solvent EG mono-n-propyl ether with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| ORGANOSILICASOL™ PMA-ST | Nissan Chemical America Corporation | ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics,...view more ORGANOSILICASOL™ PMA-ST is colloidal silica mono-dispersed in the organic solvent propylene glycol monomethylether acetate with a particle size of 10-15 µm. It is used to significantly improve the scratch, chip and mar resistance of coatings for plastics, films, paints and has many other applications. view less | Request Sample |
| SETA H 2959 | Allnex | SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room...view more SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room temperature to form homogeneous and blister-free films, even in high thicknesses. view less | Request Sample |
| SNOWTEX® IPA-ST-UP | Nissan Chemical America Corporation | SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high visco...view more SNOWTEX® IPA-ST-UP form a series of elongated particles. When compared to spherical silica particles the SNOWTEX® IPA-ST-UP elongated particles can provide many unique advantages. It features good film forming, good bonding, good migration, and high viscosity <20 mPa•s. This product is stabilized in IPA. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| SNOWTEX® ST-20L | Nissan Chemical America Corporation | SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other application...view more SNOWTEX® ST-20L is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s. Most recently, it has been used by the semiconductor industry as a polishing agent for silicon wafers. Other applications for SNOWTEX® ST-20L include a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatment. view less | Request Sample |
| SNOWTEX® ST-40 | Nissan Chemical America Corporation | SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings,...view more SNOWTEX® ST-40 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <25 mPa•s. It has applications as a catalyst binder, textile treatment, polishing, binder for casting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-50 | Nissan Chemical America Corporation | SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory,...view more SNOWTEX® ST-50 is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has viscosity of <50 mPa•s. It has applications as catalyst binders, textile treatments, polishing, binder for coasting, painting/coatings, refractory, anti-corrosion, and metal surface treatments. view less | Request Sample |
| SNOWTEX® ST-C | Nissan Chemical America Corporation | SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorg...view more SNOWTEX® ST-C is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has as viscosity o <10 mPa•s. It has a applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| SNOWTEX® ST-N | Nissan Chemical America Corporation | SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic f...view more SNOWTEX® ST-N is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity <6 mPa•s. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatment. view less | Request Sample |
| SNOWTEX® ST-O | Nissan Chemical America Corporation | SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints...view more SNOWTEX® ST-O is a colloidal silica with many applications for paper, fibers, steel, and catalysts. It has a viscosity of <3 mPa•s with a particle size of 2-4 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-O-UP | Nissan Chemical America Corporation | SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface...view more SNOWTEX® ST-O-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <20 mPa•s with a particle size of 40-100 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-OL | Nissan Chemical America Corporation | SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface tre...view more SNOWTEX® ST-OL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <3 mPa•s with a particle size of 10-20 µm. It has applications as a catalyst binder, textile treatment, metal surface treatment, paints, coatings, binder for inorganic film, and special paper treatments. view less | Request Sample |
| SNOWTEX® ST-PS-M | Nissan Chemical America Corporation | SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment ...view more SNOWTEX® ST-PS-M is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The ST-PS has a viscosity of <100 mPa•s, and is called the "String of Pearls" because of the particle shape. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-MO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applicat...view more SNOWTEX® ST-PS-MO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The features of this product include being pearl shaped, good coating, good fluidity, good bonding, large pososity, and high viscosity. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-S | Nissan Chemical America Corporation | SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, bi...view more SNOWTEX® ST-PS-S is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 10-15/80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-PS-SO | Nissan Chemical America Corporation | SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder f...view more SNOWTEX® ST-PS-SO is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 80-150 µm. It has applications as a surface treatment for plastics/metals, binder for catalyst, modification of paints or coating agents, binding agent, and casting. view less | Request Sample |
| SNOWTEX® ST-UP | Nissan Chemical America Corporation | SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals,...view more SNOWTEX® ST-UP is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The viscosity of this product is <100 mPa•s with a particle size of 9-15/40-100 µm. It has applications as a coating agent for paper, plastics and metals, a binder for refractory, ceramic and glass fiber, and in textile treatments. view less | Request Sample |
| SNOWTEX® ST-ZL | Nissan Chemical America Corporation | SNOWTEX® ST-ZL is a colloidal silica with many applications for paper, fibers, steel, and catalysts. The particle size of this product is at 90 µm. | Request Sample |
| SYNTHACRYL® 700 | Allnex | SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting harder for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700produce outstandingly smooth, dead ma...view more SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting harder for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700produce outstandingly smooth, dead matte finishes. view less | Request Sample |
| SYNTHACRYL® 710 | Allnex | SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outsta...view more SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outstandingly smooth, dead matte finishes. view less | Request Sample |
| Telalit 0309 | Spolchemie | Telalit 0309 is a yellow-green colored amine hardener for epoxy resins. It is a hardener for epoxy resins it is made from aliphatic polyamines with added accelerators for being able to cure at lower temperatures. This product is primarily used as a harden...view more Telalit 0309 is a yellow-green colored amine hardener for epoxy resins. It is a hardener for epoxy resins it is made from aliphatic polyamines with added accelerators for being able to cure at lower temperatures. This product is primarily used as a hardener with a wide range of uses it is designed for temperatures of +10 - +20 °C. view less | |
| Telalit 0420 | Spolchemie | Telalit 0420 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0420 is used as a hardener for heavy-duty laminating systems and also in civil and electrical engineering applic...view more Telalit 0420 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0420 is used as a hardener for heavy-duty laminating systems and also in civil and electrical engineering applications. It is designed to be able to be applied at room temperature. view less | |
| Telalit 0430 | Spolchemie | Telalit 0430 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0430 is used as a hardener for short processing time solvent-free and solid coatings. It is used in civil engine...view more Telalit 0430 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0430 is used as a hardener for short processing time solvent-free and solid coatings. It is used in civil engineering applications. It is designed to be able to be applied at room temperature. view less | |
| Telalit 0492 | Spolchemie | Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil enginee...view more Telalit 0492 is a yellow-brown colored amine hardener for epoxy resin systems. This product is an additive to a mixture of amine hardeners with medium pot life at room temperatures. Telalit 0492 is primarily used in curing of epoxy resins in civil engineering applications. It is also used in the manufacturing of adhesives. view less | |
| Telalit 0500 | Spolchemie | Telalit 0500 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0500 is used as a hardener for short processing time and solvent-free and high solid coating and sealing systems...view more Telalit 0500 is a yellow-brown colored amine hardener for epoxy resins. This product is modified by cycloaliphatic polyamine compound. Telalit 0500 is used as a hardener for short processing time and solvent-free and high solid coating and sealing systems. view less | |
| Telalit 0590 | Spolchemie | Telalit 0590 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by polyether polyamines. Telalit 0590 is primarily used as a curing agent to produce a hardener that provides wet fillers and fibers. This product is u...view more Telalit 0590 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by polyether polyamines. Telalit 0590 is primarily used as a curing agent to produce a hardener that provides wet fillers and fibers. This product is used on composite materials and can be used in RTM/RIM applications. view less | |
| Telalit 0600 | Spolchemie | Telalit 0600 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine with extended pot-life. It has a low exothermic effect while processing. Telalit 0600 is used for curing in epoxy resin system...view more Telalit 0600 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine with extended pot-life. It has a low exothermic effect while processing. Telalit 0600 is used for curing in epoxy resin systems and is intended mainly for producing adhesives and as a coating to improve surface reinforcement as well as surface wetting. view less | |
| Telalit 0903 | Spolchemie | Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epox...view more Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epoxy systems for construction and composites and is designed to cure at room temperature. view less | |
| Telalit 1040 | Spolchemie | Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-base...view more Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-based systems and in high-solid coatings. view less | |
| Telalit 1203 NF | Spolchemie | Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-f...view more Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-free epoxy systems and high-solid coatings with low yellowing. view less | |
| Telalit 160 | Spolchemie | Telalit 160 is a yellow-brown amine hardener for epoxy resin systems. This product is modified by poly-alkyl-enepolyamine and has a medium molecular weight. Telalit 160 is primarily used as a hardener for two-component epoxy coating systems. | |
| Telalit 180 | Spolchemie | Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispers...view more Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispersion. view less | |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...view more Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. view less |
