| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...view more 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. view less | |
| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...view more ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. view less | Request Sample |
| ADDITOL® P 920 | Allnex | ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produ...view more ADDITOL® P 920 is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produce a consistent wrinkle finish with good mechanical properties. view less | Request Sample |
| ADDITOL® P 963 | Allnex | ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...view more ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. view less | Request Sample |
| ADDITOL® P 964 | Allnex | ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catal...view more ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less | Request Sample |
| ADDITOL® P 966 | Allnex | ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...view more ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. view less | Request Sample |
| ADDITOL® VXK 6365 | Allnex | ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to chec...view more ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife. view less | Request Sample |
| Bayoxide® Z active | OMG Borchers GmbH | Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for ...view more Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for coatings based on binders which are compatible with zinc oxide. view less | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...view more Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. view less | |
| Borchi® Kat 0243 | OMG Borchers GmbH | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0244 | OMG Borchers GmbH | Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0245 | OMG Borchers GmbH | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| Borchi® Kat 0761 | OMG Borchers GmbH | Borchi® Kat 0761 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one- and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. Borchi® Kat 0761 contains no organometal compounds and no o...view more Borchi® Kat 0761 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one- and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. Borchi® Kat 0761 contains no organometal compounds and no organic complexing agents. Borchi® Kat 0761 is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and organotin compounds, such as DBTL. Borchi® Kat 0761 is suitable for one- and two-component solventborne polyurethane clear coats and pigmented coating systems, e.g. for automotive refinishing and industrial coatings as well as for Coil-Coating paints based on blocked isocyanate systems. In this application Borchi® Kat 0761 provides a high catalytic activity. view less | |
| Borchi® Kat 15 | OMG Borchers GmbH | Borchi® Kat 15 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an e...view more Borchi® Kat 15 is a tin-free catalyst based on zinc neodecanoate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and dibutyl tin dilaurate (DBTL). view less | |
| Borchi® Kat 22 | OMG Borchers GmbH | Borchi® Kat 22 is a tin-free catalyst based on metal carboxylate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an e...view more Borchi® Kat 22 is a tin-free catalyst based on metal carboxylate. It is an accelerator for solventborne one and two-component polyurethane coatings and polyurethane-based Coil-Coating systems. This product contains no organic complexing agents and is an ecologically safe replacement for other polyurethane catalysts, especially for tertiary amines and dibutyl tin dilaurate (DBTL). view less | |
| Borchi® Kat 24 | OMG Borchers GmbH | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Borchi® Kat 28 | OMG Borchers GmbH | Borchi® Kat 28 is a stabilized tin octoate with a metal content of approx. 28 % by weight and is soluble in most organic solvents. It is a clear solvent-free liquid of low viscosity. This product contains no additional organic complexing agents. It allows...view more Borchi® Kat 28 is a stabilized tin octoate with a metal content of approx. 28 % by weight and is soluble in most organic solvents. It is a clear solvent-free liquid of low viscosity. This product contains no additional organic complexing agents. It allows optimal control of the drying properties, both during forced-drying and curing at room temperature. view less | |
| Borchi® Kat 315 | OMG Borchers GmbH | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 320 | OMG Borchers GmbH | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® OXY - Coat | OMG Borchers GmbH | Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent resul...view more Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in all coatings which dry by oxidation, such as Alkyd, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| Borchi® OXY - Coat 1101 | OMG Borchers GmbH | Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results...view more Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| BYK®-CATALYST 450 | BYK | BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especiall...view more BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especially low reactive melamine formaldehyde resins of HMMM-type need an accelerator to lower the curing temperature or to reduce the baking time. In comparison with pure para-toluenesulfonic acid, the product shows considerably lower viscosity increase on storage which can extend shelf life 1,5 - 3 times. The additive allows a 10 to 20°C lower baking temperature compared to other blocked para-TSA catalysts (such as those with morpholine or aminomethylpropanol). view less | |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| CYCAT® 500 | Allnex | CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CY...view more CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT® 500 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT® 500 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT® 500 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 6020 | Allnex | CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 6030 | Allnex | CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 6051 | Allnex | CYCAT® 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems. | Request Sample |
| CYCAT® 655 CATALYST | Allnex | CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...view more CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...view more CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. view less | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...view more CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less | Request Sample |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less | Request Sample |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less | Request Sample |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| Drocure™ 5130 | D.R. Coats Ink & Resins Pvt. Ltd. | Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol. | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Monomer SM6226 | Jiangsu Sanmu Group Corporation | Monomer SM6226 is a special tertiary acrylate used as a reactive amine synergist. | |
| Monomer SM6338 | Jiangsu Sanmu Group Corporation | Monomer SM6338 is a special tertiary acrylate used as a reactive amine synergist. | |
| PTSC | Axcentive Sarl | PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blockin...view more PTSC stands for para toluene sulfonylchloride also named tosylchloride or abbreviated TsCl. It serves as intermediate in pharmaceutics and in various chemical synthesis. This product can be used as an acid catalyst in thermosetting resins and as a blocking agent to protect hydroxyl groups during reactions. view less | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...view more Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. view less | |
| Spolapon CS | Enaspol AS | Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings ...view more Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings and the cross-linking of adhesives. view less | |
| Spolapon XS | Enaspol AS | Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or...view more Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or coatings and the cross-linking of adhesives. view less | |
| TIB KAT® 129 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 129 is a liquid catalyst that distributes well in reactants. It is used for esterifications in oleochemistry, catalysis or polyurethane systems, curing of silicone resins and silanes and for polymerisation of lactones to biodegradable polymers. | |
| TIB KAT® 160 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). T...view more TIB KAT® 160 is a catalyst that is used in the production of organic esters and plasticizers. It possesses a high level of catalytic activity which leads to almost complete conversions with short reaction times at higher reaction temperatures (> 160°C). This product also enables the production of light-coloured esters. Secondary reactions do hardly occur in comparison to acidic catalysts. view less | |
| TIB KAT® 162 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the...view more TIB KAT® 162 is a catalyst that is used in the production of polyesters and oleochemical-based esters. It is also used as an activator in the production of elastomers. This product is soluble in water and a number of non-aqueous polar solvents. During the esterification process, it minimises the dehydration of alcohols and avoids odours and discolouration of the products which can be formed by possible by- products. view less | |
| TIB KAT® 188 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows th...view more TIB KAT® 188 is a free-flowing, dry, stable tin(II) oxide which has excellent catalytic properties as an esterification catalyst. The quantities of this product to be added for esterification are generally between 0.01 and 0.10 wt.-%. TIB KAT 188 shows the highest catalytic activity at reaction temperatures between 180 - 260°C. view less | |
| TIB KAT® 208 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 208 is a liquid organotin catalyst dissolved in a special solvent. It is advantageous for the production of coatings based on polyurethanes and is suitable for the condensation of silicones. | |
| TIB KAT® 214 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytica...view more TIB KAT® 214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. It has higher hydrolytic stability than comparable organotin carboxylates. The catalytical reactivity of this product in polyurethane systems is in most cases higher than DBTL (TIB KAT® 218), resulting in shorter pot life and quicker curing times. The use in water-based systems is possible within certain limits. view less | |
| TIB KAT® 216 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabil...view more TIB KAT® 216 is a liquid tin catalyst based on dioctyltin compounds. It provides improved toxicological properties and is used in the curing of silicone resins, catalysis of polyurethane resins, transesterification and esterification reactions as a stabilizer for PVC. view less | |
| TIB KAT® 217 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 217 is a liquid catalyst based on a dioctyltinoxide formulation. It can be applied for the curing of silicones and silane systems. | |
| TIB KAT® 218 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectur...view more TIB KAT® 218 is a catalyst that can be used in esterification and transesterification reactions. It is also used in the reaction between isocyanates and alcohols. This product is suitable for can and coil coatings, elastomers, car refinishing, architectural, and other industrial coatings; and for 1p/2p adhesives and sealants.. view less | |
| TIB KAT® 220 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | |
| TIB KAT® 225 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive ...view more TIB KAT® 225 is a catalyst for use in various applications such as esterification and transesterification reactions as well as the condensation of silicones and silanes, especially for the production of RTV silicone resins. This product is less sensitive to moisture than other types of DBTL. view less | |
| TIB KAT® 226 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 226 is a catalyst for the synthesis of polyurethane systems, polycondensation reactions of RTV silicon resins and silanes and for 1 K MS silyl systems. It is miscible with organic solvents, but sensitive to moisture and frost. | |
| TIB KAT® 232 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration rangin...view more TIB KAT® 232 is a solid, amorphous organotin catalyst that is used in esterification and transesterification reactions, polycondensation reactions and in the manufacture of polyester and alkyd resins. This product is typically used at concentration ranging from 0.01 - 0.5%wt. depending on the application. view less | |
| TIB KAT® 233 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 233 is a catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions and for the production of raw material for polycarbonates. This product has a tin content of 32.5-34.0%. | |
| TIB KAT® 248 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-depos...view more TIB KAT® 248 is a solid, amorphous catalyst that is used for the synthesis of polyurethane systems, transesterification, polycondensation reactions. It is available in different particle-size distributions for application as an ingredient of electro-deposition paint. This product is also suitable for the transesterification of vinyl acetate or acrylic acid copolymers. view less | |
| TIB KAT® 248 LC | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 248 LC is a solid, amorphous catalyst which is used in esterification, transesterification and polycondensation reactions. It is also suitable for the manufacturing of polyester resins and electrodeposition paints. | |
| TIB KAT® 250 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in...view more TIB KAT® 250 is a solid, amorphous catalyst that can be used in esterification, transesterification and polycondensation reactions. Using this product leads to excellent results in the production of saturated and unsaturated polyester resins as well as in production of alkyd resins. view less | |
| TIB KAT® 251 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 251 is a solid, white catalyst that is excellent for esterification, transesterification and polycondensation reactions in the production of alkyd resins, polyester resins and oleochemical resins. | |
| TIB KAT® 256 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 256 is a solid catalyst that is used in esterification, transesterification and polycondensation reactions. It gives good results in the production of polyesters and alkyds. This product is practically insoluble in water and organic solvents. | |
| TIB KAT® 620 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this produc...view more TIB KAT® 620 is an effective catalyst for numerous applications. It is especially useful in polyurethane systems. This product shows a lower reactivity and longer potlife in 2p systems when compared to organotin catalysts. This zinc content of this product is greater than or equal to 19.0%. view less | |
| TIB KAT® 623 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers. | |
| TIB KAT® 716 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 716 is a slightly yellow, liquid catalyst based on bismuth, which shows exceptional catalytical activity. It is suitable for polyurethane systems for automotive, industrial or car refinishing systems. | |
| TIB KAT® 718 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 718 is a liquid catalyst based on a blend of special metal carboxylates. The product is suitable to replace dibutyltin dilaurate in certain polyurethane systems. It is especially suitable for curing reactions at elevated temperatures. | |
| TIB KAT® 720 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 720 is a bismuth based catalyst that can be used for catalysis of polyurethane systems. It can be dissolved in common solvents for PU systems, but it is recommended to test the solution stability carefully. | |
| TIB KAT® 808 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insolub...view more TIB KAT® 808 is used as a co-catalyst for the curing of unsaturated polyester resins. It can also be used as a polymerisation regulator in cobalt-catalyzed crosslinking reactions. This product is dark green, has a typical solvent-like odor, and is insoluble in water. view less | |
| TIB KAT® 815 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%...view more TIB KAT® 815 is a catalyst for copolymerisation reactions, hydrogenation reactions, polyurethane systems and for use as a crosslinking aid for unsaturated polyester resins. This product is a solid, red crystalline powder with an iron content of 15.0-16.5%. view less | |
| TIB KAT® HES 70 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® HES 70 is a catalyst for esterification reactions. It is especially suitable due to its low volatility at high temperatures and high vacuum. This product is miscible in water at all concentrations and is practically odorless. | |
| TIB KAT® K15 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It...view more TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It shows high compatibility and miscibility with low polar reaction partners due to its special composition. view less | |
| TIB KAT® MP | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA...view more TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA. view less | |
| TIB KAT® MSA 70 | TIBChemCorp Mexicana, S.A. de C.V. (formerly Goldschmidt Quimica de México) | TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale ...view more TIB KAT® MSA 70 is an aqueous solution of methane sulfonic acid that is an excellent catalyst providing high efficiency in esterification reactions. This product provides high efficiency in esterification reactions. It is supplied as a colorless to pale yellow liquid, so it is possible to achieve products with light colors. view less | |
| Triethylene Diamine | Suny Chem | Triethylene Diamine is mainly used as the hard and soft foaming catalyst for polyurethane and is also an initating agent for pesticide such as hexhydro pyridine. It can also be used as an additive in electroplating without cyanogens. This product is solu...view more Triethylene Diamine is mainly used as the hard and soft foaming catalyst for polyurethane and is also an initating agent for pesticide such as hexhydro pyridine. It can also be used as an additive in electroplating without cyanogens. This product is soluble in water, benzen, and alcohol, as well as in straight chain hydrocarbons like pentane, hexane, and heptane. view less | |
| WorléeAdd 2000 | Worlée-Chemie G.m.b.H. | WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears...view more WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears as a clear to slightly turbid, yellowish low viscous liquid. view less | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...view more WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. view less | |
| WorléeAdd ST-70 | Worlée-Chemie G.m.b.H. | WorléeAdd ST-70 is a free flowing stannous octoate catalyst used in polyurethane powder coatings. The product is prepared from a liquid stannous octoate and an amorphous silica powder. W´Add ST-70 can be used in acrylic-urethane and polyester-urethane pow...view more WorléeAdd ST-70 is a free flowing stannous octoate catalyst used in polyurethane powder coatings. The product is prepared from a liquid stannous octoate and an amorphous silica powder. W´Add ST-70 can be used in acrylic-urethane and polyester-urethane powder coatings to increase the reactivity. view less |
