| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| Fumed Silica | Suny Chem | Fumed Silica is used widely in silicon rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. It is insoluble in all kinds of solvents and li...view more Fumed Silica is used widely in silicon rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. It is insoluble in all kinds of solvents and liquids except hydrofluoric acid and concentrated bases. view less | |
| Gasil® 200DF | PQ Corporation | Gasil® 200DF is a fine particle silica gel with exceptional moisture adsorption properties suitable for use in drafting film coatings or as a degassing agent in aluminum based coatings. | |
| Gasil® 23D | PQ Corporation | Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for f...view more Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for foods, pharmaceuticals and fine powders. view less | |
| Gasil® 23F | PQ Corporation | Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. | |
| Gasil® GM2 | PQ Corporation | Gasil® GM2 is a silica gel specifically designed as a moisture scavenger / degassing agent for aluminum paints and as a free-flow agent in powder coatings. | |
| Gasil® HP210 | PQ Corporation | Gasil® HP210 is a high performance organically treated silica gel specifically designed as an effective matting agent for solvent based clear systems such as wood flooring, furniture, decorative and general industrial. | |
| Gasil® HP230 | PQ Corporation | Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks ...view more Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. view less | |
| Gasil® HP260 | PQ Corporation | Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal ...view more Gasil® HP260 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties in thin film applications. view less | |
| Gasil® HP270 | PQ Corporation | Gasil® HP270 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. | |
| Gasil® HP280 | PQ Corporation | Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined wit...view more Gasil® HP280 is part of a range of high performance silica gels specifically designed to provide outstanding matting efficiency in coil, general industrial and other surface coatings systems. This product provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| Gasil® HP380 | PQ Corporation | Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on...view more Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on the performance requirements of the final coated component, its cost and the local legislation. Gasil® HP380 has displayed excellent weight effectiveness in most systems in which it has been tested. view less | |
| Gasil® HP39 | PQ Corporation | Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and...view more Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| Gasil® HP860 | PQ Corporation | Gasil® HP860 is a fine particle, high performance, organically treated silica gel specifically designed as an effective matting agent for solvent based coatings such as wood flooring and furniture. | |
| Gasil® HP880 | PQ Corporation | Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore vo...view more Gasil® HP880 is a large particle, high performance, organically treated silica gel specifically designed for solvent based coatings such as wood flooring and furniture. Use of Gasil® HP880 has benefits of optimal matting efficiency from ultra high pore volume and controlled particle size distribution. Suitable in acetone rich systems, has ease of dispersion and film clarity while also allowing for raw material cost savings. view less | |
| Gasil® UV70C | PQ Corporation | Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effe...view more Gasil® UV70C is an organically treated silica gel specifically designed as an effective matting agent for 100% solids UV curable coatings for wood, plastic and graphic industry. Gasil® UV70C provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. view less | |
| HESS NCS-10 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-12 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-15 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...view more HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-3 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-5 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| HESS NCS-8 | Rellenos Funcionales Microfinos (NCS) de Hess Pumice | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...view more HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. view less | |
| IBERSIL® A-150 | Industrias Quimicas del Ebro IQE | IBERSIL® A-150 is a white powder composed of amorphous precipitated silica (SiO2). This product is suitable for use as an absorbent filler in paper and ink applications. | |
| IBERSIL® A-300 | Industrias Quimicas del Ebro IQE | IBERSIL® A-300 is a white powder composed of amorphous precipitated silica (SiO2). This product is suitable for use as an absorbent filler in paper and ink applications. | |
| IBERSIL® A-400 | Industrias Quimicas del Ebro IQE | IBERSIL® A-400 is a white powder composed of amorphous precipitated silica (SiO2). This product is suitable for use as an absorbent filler in paper and ink applications. | |
| Kaoflor® 20 A | Minerals Girona S.A. | Kaoflor® 20 A is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption of 60g/100g and a top cut of 20µm. | |
| Kaoflor® 20 B | Minerals Girona S.A. | Kaoflor® 20 B is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption DOP of 60g/100g and a top cut of 20µm. | |
| Kaoflor® 30 B | Minerals Girona S.A. | Kaoflor® 30 B is a hydrosilicate aluminum Koalin filler. It's whiteness and ow abrasivity make it one of the most notable kaolins, suitable for the industries of paints and rubber. It has an oil absorption of 58g/100g and a top cut of 30µm. | |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...view more LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. view less | |
| Micaflor® MF 10 | Minerals Girona S.A. | Micaflor® MF 10 is a potassium aluminium silicate (Mica) that, with rigorous checks throughout the treatment process, including the use of intensity magnetic separators, it is possible to offer a muscovite that is ideal for use in plastic, paints, welding...view more Micaflor® MF 10 is a potassium aluminium silicate (Mica) that, with rigorous checks throughout the treatment process, including the use of intensity magnetic separators, it is possible to offer a muscovite that is ideal for use in plastic, paints, welding, etc. This product has an oil absorption of 82g/100g and a top cut of 10µm. view less | |
| Micaflor® MF 150 | Minerals Girona S.A. | Micaflor® MF 150 is a potassium aluminium silicate (Mica) that is ideal for use in plastics, paints, and welding. This product has an oil absorption DOP of 70g/100g and a top cut of 125µm. | |
| Micaflor® MF 25 | Minerals Girona S.A. | Micaflor® MF 25 is a potassium aluminium silicate (Mica) that has gone thorough rigorous checks throughout the treatment process, including the use of high intensity magnetic separators, make it possible to offer a muscovite that is ideal for use in plast...view more Micaflor® MF 25 is a potassium aluminium silicate (Mica) that has gone thorough rigorous checks throughout the treatment process, including the use of high intensity magnetic separators, make it possible to offer a muscovite that is ideal for use in plastics, paints, and welding. It has an oil absorption of 80g/100g and a top cut of 25µm. view less | |
| Micaflor® MF 250 | Minerals Girona S.A. | Micaflor® MF 250 is a potassium aluminium silicate (Mica) that is recommended for use in plastics, paints, and electrodes. It has an oil absorption DOP of 67g/100g and a top cut of 150µm. | |
| Micaflor® MF 45 | Minerals Girona S.A. | Micaflor® MF 45 is a potassium aluminium silicate (Mica) that is recommended for use in plastics, paints, and electrodes. It has an oil absorption DOP of 77g/100g and a top cut of 40µm. | |
| Micaflor® MF 500 | Minerals Girona S.A. | Micaflor® MF 500 is a potassium aluminium silicate (Mica) that is recommended for use in plastics, paints, and electrodes. It has an oil absorption DOP of 52g/100g and a top cut of 500µm. | |
| Micaflor® MF 75 | Minerals Girona S.A. | Micaflor® MF 75 is a potassium aluminium silicate (Mica) that is ideal for use in plastics, paints, and electrodes. It has an oil absorption DOP of 77g/100g and a top cut of 60µm. | |
| Quarzflor® 30 | Minerals Girona S.A. | Quarzflor® 30 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acids coatings, adhesives and rubber. It has an oil absorption DOP of 36g/100g and a top cut of 30µm. | |
| Quarzflor® 50 | Minerals Girona S.A. | Quarzflor® 50 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acid coatings, adhesives and rubber. It has an oil absorption DOP of 28g/100g and a top cut of 50µm. | |
| Quarzflor® 80 | Minerals Girona S.A. | Quarzflor® 80 is a silica filler of high purity with a medium grade of brightness to be used in paints, anti-acid coatings, adhesives and rubber. It has an oil absorption DOP of 26g/100g and a top cut of 80µm. | |
| SILFITZ 91 | Hoffmann Mineral | SILFIT Z 91 is a natural combination of corpuscular silica and lamellar kaolinite, which has been subjected to a heat treatment. The components and the thermal process lead to a product that offers special performance benefits as a functional filler. | |
| SILLITIN N 75 | Hoffmann Mineral | SILLITIN N 75 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. It is used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SYLOID® 161 Matting Agent | Univar Solutions | SYLOID® 161 Matting Agent is an organically treated amorphous synthetic silica appearing as a white, free-flowing powder. This silica is a wax-treated matting, or gloss control agent designed for use in: general purpose OEM and DIY wood finishes, catalyze...view more SYLOID® 161 Matting Agent is an organically treated amorphous synthetic silica appearing as a white, free-flowing powder. This silica is a wax-treated matting, or gloss control agent designed for use in: general purpose OEM and DIY wood finishes, catalyzed varnishes (alkyd-urea, alkyd-amino, etc.), decorative enamels, both air-dry and forced-dry, DIY alkyd and urethane varnishes, general industrial coatings and UV curable coatings. view less | |
| SYLOID® 169 Matting Agent | Univar Solutions | SYLOID® 169 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder.This silica product is a wax-treated high efficiency, matting, or gloss control agent designed for use in: general purpose OEM and DIY wood finishes, cata...view more SYLOID® 169 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder.This silica product is a wax-treated high efficiency, matting, or gloss control agent designed for use in: general purpose OEM and DIY wood finishes, catalyzed varnishes (alkyd-urea, alkyd-amino, etc.), decorative enamels, both air-dry and forced-dry, nitrocellulose lacquers, DIY alkyd and urethane varnishes, and general industrial coatings. view less | |
| SYLOID® 221 Matting Agent | Univar Solutions | SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion fi...view more SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion finishes. view less | |
| SYLOID® 222 Matting Agent | Univar Solutions | SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistan...view more SYLOID® 222 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for use in coil coatings, general industrial coatings and extrusion finishes. Its key features are high matting effect, resistance to overgrind, less viscosity and neutral pH. view less | |
| SYLOID® 234 Matting Agent | Univar Solutions | SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key f...view more SYLOID® 234 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This product is designed for very thin films, leather and vinyl coatings, general industrial coatings and coatings or automotive plastic parts. Its key features are: high matting effect, ease of dispersion, excellent film clarity and film smoothness and tight particle distribution. view less | |
| SYLOID® 244X1517 Matting Agent | Univar Solutions | SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This ...view more SYLOID® 244X1517 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high-efficiency, matting or gloss control agent designed for use in general industrial coatings, coil coatings and extrusion finishes. This product has a high matting effect, ease of dispersion, resistance to overgrind, tight particle distribution and neutral pH. view less | |
| SYLOID® 308 Matting Agent | Univar Solutions | SYLOID® 308 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting, or gloss control agent with a special inorganic surface treatment designed for use in nitrocellulose lacquer wood finishes and acid-cata...view more SYLOID® 308 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting, or gloss control agent with a special inorganic surface treatment designed for use in nitrocellulose lacquer wood finishes and acid-catalyzed. The key features of this product are ease of dispersion and resistance to overgrind. view less | |
| SYLOID® 378 Matting Agent | Univar Solutions | SYLOID® 378 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent with a special inorganic surface treatment designed for use in fine nitrocellulose lacquer wood finishes and thin ...view more SYLOID® 378 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent with a special inorganic surface treatment designed for use in fine nitrocellulose lacquer wood finishes and thin film acid-catalyzed systems. view less | |
| SYLOID® 620 Matting Agent | Univar Solutions | SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications an...view more SYLOID® 620 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, general industrial coatings, thick films, low gloss, low sheen applications and textured finishes. This product is characterized by ease of dispersion, resistance to overgrind and neutral pH. view less | |
| SYLOID® 7000 Matting Agent | Univar Solutions | SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and sol...view more SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and solventborne furniture coatings; DIY wood finishes; natural and artificial leather coatings; coatings for automotive plastic parts; coatings for foils and laminates; and UV curable coatings. view less | |
| SYLOID® 74 Regular Matting Agent | Univar Solutions | SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less im...view more SYLOID® 74 Regular Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is designed for use in coil coatings and general industrial coatings. The key features of this product are its resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| SYLOID® 74X5500 Matting Agent | Univar Solutions | SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less i...view more SYLOID® 74X5500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This matting or control agent is designed for use coil coatings and general industrial coatings. The key features are resistance to overgrind, less impact on viscosity and neutral pH. view less | |
| SYLOID® 74X6000 Matting Agent | Univar Solutions | SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. Th...view more SYLOID® 74X6000 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coal coatings, thin films, leather and vinyl coatings and general industrial coatings. This product exhibits ease of dispersion, resistance to overgrind and neutral pH. view less | |
| SYLOID® 74X6500 Matting Agent | Univar Solutions | SYLOID® 74X6500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, very thin films, leather and vinyl coatings and general industrial coating...view more SYLOID® 74X6500 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a matting or gloss control agent designed for use in: coil coatings, very thin films, leather and vinyl coatings and general industrial coatings. This product exhibits ease of dispersion, resistance to overgrind and neutral pH. view less | |
| SYLOID® 83 Matting Agent | Univar Solutions | SYLOID® 83 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent with a special inorganic surface treatment designed for use in nitrocellulose lacquer wood finishe...view more SYLOID® 83 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent with a special inorganic surface treatment designed for use in nitrocellulose lacquer wood finishes and acid-catalyzed systems. This product exhibits a high matting effect, ease of dispersion, excellent film smoothness, resistance to overgrind and tight particle distribution. view less | |
| SYLOID® C 1007 Matting Agent | Univar Solutions | SYLOID® C 1007 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and DIY...view more SYLOID® C 1007 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and DIY wood finishes; catalyzed varnishes; decorative enamels, both air-dry and forced-dry; nitrocellulose lacquers; and DIY alkyd and urethane varnishes. view less | |
| SYLOID® C 803 Matting Agent | Univar Solutions | SYLOID® C 803 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent. Due to its fine particle size, it imparts excellent surface smoothness to the co...view more SYLOID® C 803 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent. Due to its fine particle size, it imparts excellent surface smoothness to the coating film. It is designed for: very thin films, leather and vinyl coatings, coatings for foil and laminates, coil coatings, general industrial coatings and coatings for automotive plastic parts. This product exhibits high matting effect, ease of dispersion, excellent film clarity and film smoothness, resistance to overgrind and tight particle distribution. view less | |
| SYLOID® C 805 Matting Agent | Univar Solutions | SYLOID® C 805 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent designed for use in: very thin films, leather and vinyl coatings, coil coatings, ...view more SYLOID® C 805 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent designed for use in: very thin films, leather and vinyl coatings, coil coatings, general industrial coatings and coatings for automotive plastic parts. This product exhibits a high matting effect, ease of dispersion, excellent film clarity and film smoothness, resistance to overgrind and tight particle distribution. view less | |
| SYLOID® C 807 Matting Agent | Univar Solutions | SYLOID® C 807 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent designed for use in thin films, coil coatings and general industrial coatings. Th...view more SYLOID® C 807 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, high clarity, matting or gloss control agent designed for use in thin films, coil coatings and general industrial coatings. The key features of this product are its high matting effect, ease of dispersion, excellent film smoothness, resistance to overgrind and tight particle distribution. view less | |
| SYLOID® C 809 Matting Agent | Univar Solutions | SYLOID® C 809 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings, general industrial coatings and extrusion finishes. | |
| SYLOID® C 810 Matting Agent | Univar Solutions | SYLOID® C 810 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings, general industrial coatings and extrusion finishes. This pr...view more SYLOID® C 810 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings, general industrial coatings and extrusion finishes. This product exhibits a high matting effect, ease of dispersion, sheen reduction, resistance to overgrind, tight particle distribution and improved metal marking. view less | |
| SYLOID® C 812 Matting Agent | Univar Solutions | SYLOID® C 812 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings; general industrial coatings; extrusion finishes; products r...view more SYLOID® C 812 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings; general industrial coatings; extrusion finishes; products requiring very low gloss/very low sheen; and high solids coatings. view less | |
| SYLOID® C 906 Matting Agent | Univar Solutions | SYLOID® C 906 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white , free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and D...view more SYLOID® C 906 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white , free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and DIY wood finishes; catalyzed varnishes (alkyd-urea, alkyd-amino, etc.); decorative enamels, both air-dry and forced-dry; nitrocellulose lacquers; and DIY alkyd and urethane varnishes. view less | |
| SYLOID® C 907 Matting Agent | Univar Solutions | SYLOID® C 907 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and DIY ...view more SYLOID® C 907 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is a wax-treated high efficiency, matting or gloss control agent designed for use in: general purpose OEM and DIY wood finishes; catalyzed varnishes (alkyd-urea, alkyd-amino, etc.); decorative enamels, both air-dry and forced-dry; nitrocellulose lacquers; DIY alkyd and urethane varnishes; and general industrial coatings. view less | |
| SYLOID® ED 30 Matting Agent | Univar Solutions | SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coating...view more SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-borne furniture coatings; DIY wood finishes; artificial and natural leather coatings; and coatings for automotive plastic parts. view less | |
| SYLOID® ED 44 | Univar Solutions | SYLOID® ED 44 Matting Agent is a high porosity, easily dispersible silica matting agent with a high matting efficiency. Due to its favorable particle size and special treatment, it imparts excellent surface properties to the coating film. SYLOID® ED 44 Ma...view more SYLOID® ED 44 Matting Agent is a high porosity, easily dispersible silica matting agent with a high matting efficiency. Due to its favorable particle size and special treatment, it imparts excellent surface properties to the coating film. SYLOID® ED 44 Matting Agent is recommended for use in highly reactive industrial stoving systems and coil coatings, transparent and pigmented polyurethane varnishes, unsaturated polyester lacquers, and UV coatings based on acrylates and unsaturated polyesters. view less | |
| SYLOID® ED 5 | Univar Solutions | SYLOID® ED 5 Matting Agent is a synthetic amorphous silica appearing as white free flowing powder. It has a remarkable high matting efficiency and is, therefore, mainly used for pigmented industrial and trade sales coatings, coil coatings, water-based sys...view more SYLOID® ED 5 Matting Agent is a synthetic amorphous silica appearing as white free flowing powder. It has a remarkable high matting efficiency and is, therefore, mainly used for pigmented industrial and trade sales coatings, coil coatings, water-based systems, and unsaturated UV-polyester finishes.5 view less | |
| SYLOID® LV-6 Matting Agent | Univar Solutions | SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coati...view more SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coatings and extrusion finishes. This product exhibits minimum viscosity impact and excellent flow and leveling at low VOC. view less | |
| SYLOID® RAD 2005 Matting Agent | Univar Solutions | SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled par...view more SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2005 silica provides consistent gloss over varying coating weights and excellent gloss and viscosity stability. It is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. This product may also be suitable for other types of solvent and waterborne coatings. view less | |
| SYLOID® RAD 2105 Matting Agent | Univar Solutions | SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled part...view more SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2105 silica provides consistent gloss over small varying coating weights and excellent gloss and viscosity stability. This product is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. SYLOID® RAD 2105 silica matting agent may also be suitable for other types of solvent and waterborne coatings. view less | |
| SYLOID® W 300 Matting Agent | Univar Solutions | SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface ...view more SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface appearance and high film clarity. It is also characterized by improved mar and burnishing resistance, resistance to overgrind and sheen reduction. view less | |
| SYLOID® W 500 Matting Agent | Univar Solutions | SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and b...view more SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and burnishing resistance and resistance to overgrind. view less | |
| Talkron® CL 10 | Minerals Girona S.A. | Talkron® CL 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of ...view more Talkron® CL 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 10µm. view less | |
| Talkron® CL 20 | Minerals Girona S.A. | Talkron® CL 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of ...view more Talkron® CL 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 20µm. view less | |
| Talkron® CL 40 | Minerals Girona S.A. | Talkron® CL 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 40 is a magnesium aluminum hydro...view more Talkron® CL 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 40 is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 40µm. view less | |
| Talkron® CL 75 | Minerals Girona S.A. | Talkron® CL 75 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 75 is a magnesium aluminum hydro...view more Talkron® CL 75 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 75 is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 75µm. view less | |
| Talkron® NT 10 | Minerals Girona S.A. | Talkron® NT 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® NT 10 is a magnesium hydrosilicate ...view more Talkron® NT 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® NT 10 is a magnesium hydrosilicate of lamellar structure, of high purity and lamellar structure, with a good grade of whiteness making it ideal for use in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 10µm. view less | |
| Talkron® NT 20 | Minerals Girona S.A. | Talkron® NT 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with a good grade of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natur...view more Talkron® NT 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with a good grade of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 20µm. view less | |
| Talkron® NT 40 | Minerals Girona S.A. | Talkron® NT 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI so...view more Talkron® NT 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 40µm. view less | |
| Talkron® NT 60 | Minerals Girona S.A. | Talkron® NT 60 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a n...view more Talkron® NT 60 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 50µm. view less | |
| Talkron® PR 10 | Minerals Girona S.A. | Talkron® PR 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...view more Talkron® PR 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 10µm. view less | |
| Talkron® PR 20 | Minerals Girona S.A. | Talkron® PR 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...view more Talkron® PR 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 20µm. view less | |
| Talkron® PR 40 | Minerals Girona S.A. | Talkron® PR 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...view more Talkron® PR 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 40µm. view less | |
| Talkron® PR 5 | Minerals Girona S.A. | Talkron® PR 5 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of...view more Talkron® PR 5 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 6µm. view less | |
| Talkron® ST 10 | Minerals Girona S.A. | Talkron® ST 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...view more Talkron® ST 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 10µm. view less | |
| Talkron® ST 20 | Minerals Girona S.A. | Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersi...view more Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 20µm. view less | |
| Talkron® ST 30 | Minerals Girona S.A. | Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersi...view more Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. It has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 30µm. view less | |
| Talkron® ST 40 | Minerals Girona S.A. | Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion ...view more Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 40µm. view less |
