| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...view more CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. view less | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...view more CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...view more CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. view less | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...view more CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...view more Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. view less | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Disvalkyd-509 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-509 is an alkyd resin made with long oils. This product derives from linseed oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvalkyd-519 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-519 is an alkyd resin made from long oils. This product derives from diluted crude oil. It can be used in primers, undercoats, decorative enamels, and architectural finishes. | |
| Disvalkyd-543 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-543 is a modified alkyd resin. This product is made with linseed oils and penta polyols. It can be used in primers and industrial finishes. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-545 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-545 is a modified alkyd resin. This product derives from diluted crude oil and penta polyols. It can be used in economical air-drying paints, primers and undercoatings. | |
| Disvalkyd-553 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-553 is an alkyd resin made with medium-length oils. This product uses a mixture of oils and mixed polyols. It can be used in air-drying enamels, primers, and specially-stoved enamels. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Docure KH-240 | Kukdo Chemical Co., Ltd. | Docure KH-240 is a polyamine modified curing agent and is used for general adhesives. KH-240 has a good flexibility and adhesion strength. It is well suited for use in the production of primers and maintenance coatings. | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...view more Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. view less | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...view more Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. view less | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...view more Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. view less | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| Epokukdo KEM-101-50 | Kukdo Chemical Co., Ltd. | Epokukdo KEM-101-50 is an aqueous epoxy resin emulsion based on conventional solid epoxy resin. KEM-101-50 cured in combination with water dispersible hardener, Docure KH-700, exhibits especially good adhesion to most substrates and has good physical prop...view more Epokukdo KEM-101-50 is an aqueous epoxy resin emulsion based on conventional solid epoxy resin. KEM-101-50 cured in combination with water dispersible hardener, Docure KH-700, exhibits especially good adhesion to most substrates and has good physical properties as well as water and corrosion resistance. KEM-101-50/Docure KH-700 waterborne system has been used in primer and top coating areas. view less | |
| Epokukdo YD-011S | Kukdo Chemical Co., Ltd. | Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint,...view more Epokukdo YD-011S is a low molecular weight solid epoxy resin derived from liquid epoxy resin and Bisphenol-A. YD-011S is used for various applications in both structure and surface-coating such as primer, top coating, anti-corrosive coating, marine paint, heavy duty coating, filament winding, laminating, various composite application and so forth. view less | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...view more HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. view less | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| HS9553 | Tianyi Chemical Engineering Material Co., Ltd. | HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. I...view more HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. view less | |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 345 | Hydrite Chemical Co. | HydriCryl 345 is a low molecular weight solution resin for enhancing gloss in coatings and overprint varnishes. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film f...view more Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the pre...view more Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on th...view more Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that...view more Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks...view more Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. view less | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...view more Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...view more Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...view more Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. view less | |
| Kingmide 150-50 | Sanho Chemical Co., Ltd. | Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications. | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-60 | Sanho Chemical Co., Ltd. | Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70 | Sanho Chemical Co., Ltd. | Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70X | Sanho Chemical Co., Ltd. | Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315-80 | Sanho Chemical Co., Ltd. | Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications. | |
| Lucidene 202 | Hydrite Chemical Co. | Lucidene 202 is a water-based styrene/acrylic copolymer designed for use with metallic pigments. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 243 | Hydrite Chemical Co. | Lucidene 243 is a fast-drying emulsion with good grease resistance, making it ideal for use in ink and primer applications. | |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 645 | Hydrite Chemical Co. | Lucidene 645 is an acrylic/urethane emulsion featuring high gloss and good alkaline and detergent resistance. This product is well suited for use in water-based inks and coatings. | |
| Polurene 2391 | S.A.P.I.C.I. SpA | Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less tha...view more Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less than .5% TDI or IPDI isocyanates. view less | |
| Polurene 3031 | S.A.P.I.C.I. SpA | Polurene 3031 is an aromatic isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...view more Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. view less | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...view more Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. view less | |
| Polurene HR.B | S.A.P.I.C.I. SpA | Polurene HR.B is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...view more Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. view less | |
| Polurene IR 51 AB | S.A.P.I.C.I. SpA | Polurene IR 51 AB is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene IR 51 K | S.A.P.I.C.I. SpA | Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product prime...view more Polurene IR 51 K is an aromatic isocyanurate based on toluenediisocyanate. This product cures quickly, with limited yellowing, good elasticity, and felxibility. It can be used in combination with any Rexin K saturated polyester in order to product primer or overprint varnishes. view less | |
| Polurene KC | S.A.P.I.C.I. SpA | Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can imp...view more Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can improve between-layer adhesion. view less | |
| Polurene SB 50 AB | S.A.P.I.C.I. SpA | Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains l...view more Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains less than .5% TDI isocyanates. view less | |
| Polurgreen ES.M | S.A.P.I.C.I. SpA | Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with high...view more Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...view more Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Polurgreen HR-01 | S.A.P.I.C.I. SpA | Polurgreen HR-01 is a low-monomer isocyanurate. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. It is composed of less than .1% TDI isocyanate, and is based in a butyl-acetate solvent. | |
| Resygs MG 4860 | SGS Polimeros | Resygs MG 4860 is a pure alkyd resin, characterized by its weather resistance and flexibility. This product is used in paints, varnishes, primers, sealants, lacquers, and automotive repainting primers and varnishes. | |
| Resygs SPG 4060 | SGS Polimeros | Resygs SPG 4060 is a pure alkyd resin, characterized by its high viscosity, chemical resistance, and hardness. This product is used in furniture paints, primers, sealants, lacquers, fillers, and automotive repainting varnishes. | |
| Resygs SPG 5050 | SGS Polimeros | Resygs SPG 5050 is a conventional alkyd resin. This product is designed for mechanical paints, synthetic paints and primers, automotive repainting, dye concentrates, decorative enamels, and wood varnishes and sealants. | |
| Rexin 138 | S.A.P.I.C.I. SpA | Rexin 138 is a short-oil alkyd resin. This product cures quickly because of high cross-linking capabilities. It can be used in 2K polyurethane matt topcoats. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin 143/70 AB | S.A.P.I.C.I. SpA | Rexin 143/70 AB is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and high wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin DP 343 | S.A.P.I.C.I. SpA | Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings...view more Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings. view less | |
| Rexin DP 390 | S.A.P.I.C.I. SpA | Rexin DP 390 is a saturated polyester resin. This product dries quickly with good flexibility, hardness, and a long pot life. It can be used in clear or pigmented matte and high gloss 2K polyurethane sealers and top coats. | |
| Rexin HG 3 | S.A.P.I.C.I. SpA | Rexin HG 3 is a short-oil alkyd resin. This product cures quickly with good yellowing resistance and body filling. It can be used in clear or white high-gloss topcoats. | |
| Rexin HS 0685 AB | S.A.P.I.C.I. SpA | Rexin HS 0685 AB is a short-oil alkyd resin. This product has good solvent release, good hardness, and a long pot life. It can be used in matt, clear, or pigmented polyurethane topcoats with high solids formulations. | |
| Rexin HS 129/70 AB | S.A.P.I.C.I. SpA | Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability ...view more Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability of sealers. view less | |
| Rexin LS 124 | S.A.P.I.C.I. SpA | Rexin LS 124 is a low-viscosity short-oil alkyd resin. This product has good elasticity, adhesion and pigment wettability. It can be used in pigmented polyurethane sealers and topcoats. This product also creates an abrasion-resistant coating. | |
| Synthalat A-BWH 2172 | Synthopol Chemie Germany | Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion o...view more Synthalat A-BWH 2172 is an aqueous binder for the production of baking primers and enamels. It can be crosslinked with melamine resins as well as with blocked polyisocyanates – also without these crosslinkers, excellent corrosion resistance and adhesion on steel can be achieved. view less | |
| SYNTHALAT QWK 3517 | Synthopol Chemie Germany | SYNTHALAT QWK 3517 is a water-based acrylic-modified alkyd resin. It can be used for water-based primers and one-layer coats. |
