| PEL-PHOS™ 444 | Ele Corporation | PEL-PHOS™ 444 is dinonylphenol, ethoxylated and phosphated. It is an EP agent used as a co-emulsifier for oil-based cutting fluids with some ferrous and non-ferrous corrosion inhibition properties. | |
| PEL-INE™ 883 | Ele Corporation | PEL-INE™ 883 is composed of octyldiethanolamine. This octylamine-based pH adjustor has odor control and ferrous corrosion inhibition properties. | |
| PEL-ALC™ 471-A | Ele Corporation | PEL-ALC™ 471-A is a fatty alcohol, ethoxylated and propoxylated. It is a lower-foaming surfactant used in general purpose cleaners. This product has a cloud point of 18˚ C. | |
| PEL-ALC™ BL-240 | Ele Corporation | PEL-ALC™ BL-240 is a linear alcohol EO/PO copolymer. It produces a rather low amount of foam, making it particularly suited to high temperature cleaning and auto dish rinse aids. | |
| PEL-ROK™ 17R2 | Ele Corporation | PEL-ROK™ 17R2 is polyethylene glycol, propoxylated. It is a water-soluble, low-foaming block copolymer surfactant used in synthetic C&G fluids. | |
| PEL-AMID™ TDP-1.2 | Ele Corporation | PEL-AMID™ TDP-1.2 is an alkanolamide derived from diisopropanolamine and tall oil fatty acid. It exhibits better solubility and better lubrication properties than conventional diethanolamides. In addition, PEL-AMID™ TDP-1.2 provides superior corrosion inh...view more PEL-AMID™ TDP-1.2 is an alkanolamide derived from diisopropanolamine and tall oil fatty acid. It exhibits better solubility and better lubrication properties than conventional diethanolamides. In addition, PEL-AMID™ TDP-1.2 provides superior corrosion inhibition and reserve alkalinity than diethanolamine derived amides. It is oil soluble, water dispersible and a good choice for a primary or secondary emulsifier. view less | |
| PEL-PHOS™ LP-300 | Ele Corporation | PEL-PHOS™ LP-300 is a low-foaming aromatic phosphate ester with hydrotrope properties. It is a highly efficient agent for coupling nonionic surfactants into built hard surface cleaners. It is useful for cleaning formulations intended for metal & bottlewas...view more PEL-PHOS™ LP-300 is a low-foaming aromatic phosphate ester with hydrotrope properties. It is a highly efficient agent for coupling nonionic surfactants into built hard surface cleaners. It is useful for cleaning formulations intended for metal & bottlewashing. When incorporated into metal cutting formulations, PEL-PHOS™ LP-300 provides extreme pressure lubricity due to its phosphate functionality. view less | |
| PEL-AMID™ SD | Ele Corporation | PEL-AMID™ SD is a high molecular weight oil soluble alkanolamide. It can form water in oil emulsions and can be used as a corrosion inhibitor. In personal care applications PEL-AMID™ SD provides good viscosity performance. In most formulations, this produ...view more PEL-AMID™ SD is a high molecular weight oil soluble alkanolamide. It can form water in oil emulsions and can be used as a corrosion inhibitor. In personal care applications PEL-AMID™ SD provides good viscosity performance. In most formulations, this product provides a modest amount of conditioning as well as imparting the desirable lubricating feel of soap. PEL-AMID™ SD has a low free diethanolamine content that meets the requirements of the European directive relating to residual diethanolamine in alkanolamides used in personal care products. view less | |
| Emulsogen® MTP 030 | Clariant International Ltd. | Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able to disperse large quantities of calcium oleate or tallate. When applied as a nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 030 is highly compatible with anionic and other nonionic formulation components. Because of its excellent solubility in almost all kinds of mineral oils, this product can be used as an anti-wear additive to improve lubricity. It also performs as a better lubricant...view more Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able to disperse large quantities of calcium oleate or tallate. When applied as a nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 030 is highly compatible with anionic and other nonionic formulation components. Because of its excellent solubility in almost all kinds of mineral oils, this product can be used as an anti-wear additive to improve lubricity. It also performs as a better lubricant than mineral oil and TMP-trioleate. view less | |
| PEL-AMID™ EWDP | Ele Corporation | PEL-AMID™ EWDP is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. PEL-AMID™ EWDP, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finishe...view more PEL-AMID™ EWDP is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. PEL-AMID™ EWDP, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finished coolant. In addition, it offers enhanced hard water stability compared to the conventional DEA-containing amides. It is recommended at levels of 5 - 10% in semi-synthetics and synthetic fluids. Higher levels, from 10 to 20%, are recommended for water soluble drawing compounds. In these applications, PEL-AMID™ EWDP produces elevated viscosity and high film strength when the finished product is inverted with water. At normal ambient temperatures, PEL-AMID™ EWDP is a liquid. At cooler temperatures, gelling or solidification may occur. Gradual warming of the material will return the product to the typical homogeneous fluid appearance. view less | |
| Durasyn® 162 | INEOS Oligomers | Durasyn® 162 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 164 | INEOS Oligomers | Durasyn® 164 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 166 | INEOS Oligomers | Durasyn® 166 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 168 | INEOS Oligomers | Durasyn® 168 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 170 | INEOS Oligomers | Durasyn® 170 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| PEL-PAG™ 967 | Ele Corporation | PEL-PAG™ 967 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 150 cSt at 37.8° C. | |
| PEL-PAG™ 968 | Ele Corporation | PEL-PAG™ 968 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 220 cSt at 37.8° C. | |
| PEL-ALC™ 235 | Ele Corporation | PEL-ALC™ 235 is a low foaming, nonionic surfactant that exhibits excellent wetting action. It may be readily formulated into highly alkaline built liquid systems. Solutions of PEL-ALC™ 235 resist foam development even under extreme or prolonged agitation....view more PEL-ALC™ 235 is a low foaming, nonionic surfactant that exhibits excellent wetting action. It may be readily formulated into highly alkaline built liquid systems. Solutions of PEL-ALC™ 235 resist foam development even under extreme or prolonged agitation. This product can be used in a variety of applications including mechanical dishwashing, rinse aids, metal cleaning, spray washing and general purpose cleaning. view less | |
| PEL-ALC™ 91-6 | Ele Corporation | PEL-ALC™ 91-6 is based on Shell Chemical’s C9-11 Neodol alcohol a linear oxo alcohol. It is ethoxylated with 6 moles of ethylene oxide. It dissolves quickly in water and provides good wetting and detergency. | |
| PEL-ALC™ BL-225 | Ele Corporation | PEL-ALC™ BL-225 is a nonionic surfactant with excellent hard surface detergency, a low propensity to foam and with good wetting. It is stable in acids and bases and soluble in both water and many organic solvents. This product may be used as a rinse aid i...view more PEL-ALC™ BL-225 is a nonionic surfactant with excellent hard surface detergency, a low propensity to foam and with good wetting. It is stable in acids and bases and soluble in both water and many organic solvents. This product may be used as a rinse aid in commercial dishwashing, as a textile scour and in metal cleaning applications. view less | |
| PEL-ALC™ CSA-20 | Ele Corporation | PEL-ALC™ CSA-20 is an excellent emulsifier and is used in personal care products as a wetting agent, solubilizer, conditioner and coupling agent. It is used in various cosmetic and toiletries such as cream rinses, conditioners, bath oils, creams, lotions,...view more PEL-ALC™ CSA-20 is an excellent emulsifier and is used in personal care products as a wetting agent, solubilizer, conditioner and coupling agent. It is used in various cosmetic and toiletries such as cream rinses, conditioners, bath oils, creams, lotions, deodorants, antiperspirants and shaving products. It is a mild, almost odorless, nonionic surfactant. PEL-ALC CSA-20, Ceteareth-20, is a synergistic primary O/W emulsifier that is stable at pH extremes. It is typically used at 0.5-5%. It is a waxy solid with an HLB of 15.7. view less | |
| PEL-ALC™ D-25-L | Ele Corporation | PEL-ALC™ D-25-L is a low foaming, linear alcohol alkoxylate based on natural lauryl alcohol. It is a nonionic surfactant that is 100% active, biodegradable, and relatively nontoxic. It is an excellent detergent for household and industrial use in cleaning...view more PEL-ALC™ D-25-L is a low foaming, linear alcohol alkoxylate based on natural lauryl alcohol. It is a nonionic surfactant that is 100% active, biodegradable, and relatively nontoxic. It is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties, it can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. view less | |
| PEL-ALC™ DF-16 | Ele Corporation | PEL-ALC™ DF-16 is a low foaming nonionic surfactant and wetting agent. It provides good hard surface detergency while offering excellent acid and base stability. In addition, it is readily biodegradable. | |
| PEL-ALC™ OA-23 | Ele Corporation | PEL-ALC™ OA-23 is PEG-23 oleyl ether. It is 100% active, and it is supplied as a waxy solid. This product is an exceptional nonionic oil in water emulsifier and is recommended for a wide range of product types and applications. PEL-ALC™ OA-23 is derived f...view more PEL-ALC™ OA-23 is PEG-23 oleyl ether. It is 100% active, and it is supplied as a waxy solid. This product is an exceptional nonionic oil in water emulsifier and is recommended for a wide range of product types and applications. PEL-ALC™ OA-23 is derived from a vegetable derived alcohol, and is an easy-to-use solid form. Its nonionic nature makes it an ideal candidate for use in leave-on skin care products. Recommended use levels range from 0.5% to 10.0%, depending on application. view less | |
| PEL-ALC™ TDA-3 | Ele Corporation | PEL-ALC™ TDA-3 surfactant is a 100% active, ethoxylated isotridecyl alcohol. It has excellent rapid wetting properties, relatively low foaming, and exhibits good detergency. This product is used as an emulsifier, dispersant, solubilizer, and detergent. | |
| PEL-AMPH™ ODP-45M | Ele Corporation | PEL-AMPH™ ODP-45M is a 45% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte PEL-AMPH™ ODP-45M is a low foamer that...view more PEL-AMPH™ ODP-45M is a 45% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte PEL-AMPH™ ODP-45M is a low foamer that provides good detergency in systems that require high cloud points. PEL-AMPH™ ODP-45M is readily biodegradable and is globally accepted. view less | |
| PEL-AMPH™ ODP | Ele Corporation | PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provid...view more PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provides good detergency in systems that require high cloud points. It is stable in both highly acid and alkaline systems offering utility in acid cleaners and heavily built detergents. view less | |
| PEL-HIB™ 372-B | Ele Corporation | PEL-HIB™ 372-B is a rust inhibitor designed for the protection of iron and steel and is soluble in water and glycol based fluids. It is not recommended for brass or aluminum. PEL-HIB™ 372-B is useful in metal working fluids and coolants, cooling water and...view more PEL-HIB™ 372-B is a rust inhibitor designed for the protection of iron and steel and is soluble in water and glycol based fluids. It is not recommended for brass or aluminum. PEL-HIB™ 372-B is useful in metal working fluids and coolants, cooling water and boiler operations as well as hydraulic fluids. Formulations utilizing PEL-HIB™ 372-B are more resistant to microbial attack. view less | |
| PEL-INE™ 257 | Ele Corporation | PEL-INE™ 257 is a useful alkalizing tertiary alkanolamine with a low molecular weight and a low melting point. It is very water soluble. This product is used as a replacement for triethanolamine and triisopropanolamine in many applications. | |
| PEL-INE™ 618 | Ele Corporation | PEL-INE™ 618 is a low volatility neutralizing amine for metal working applications. It provides alkalinity to metal working formulations and acts as a corrosion inhibitor. It is liquid, biodegradable, 100% active and nearly odorless. PEL-INE™ 618 is also ...view more PEL-INE™ 618 is a low volatility neutralizing amine for metal working applications. It provides alkalinity to metal working formulations and acts as a corrosion inhibitor. It is liquid, biodegradable, 100% active and nearly odorless. PEL-INE™ 618 is also useful as a catalyst for both epoxy and urethane systems. view less | |
| PEL-INE™ CAM-15 | Ele Corporation | PEL-INE™ CAM-15 is a tertiary amine ethoxylate, based on a primary coco amine with fifteen moles of ethylene oxide added. It is an excellent co-emulsifier, with some wetting and ferrous corrosion inhibition properties. This product is often used in cleane...view more PEL-INE™ CAM-15 is a tertiary amine ethoxylate, based on a primary coco amine with fifteen moles of ethylene oxide added. It is an excellent co-emulsifier, with some wetting and ferrous corrosion inhibition properties. This product is often used in cleaners. view less | |
| PEL-INE™ RW-20 | Ele Corporation | PEL-INE™ RW-20 is an oil soluble emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is insoluble in water but is dispersible in dilute aqueous solutions of acid. PEL-INE™ RW-20 finds use in metal...view more PEL-INE™ RW-20 is an oil soluble emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is insoluble in water but is dispersible in dilute aqueous solutions of acid. PEL-INE™ RW-20 finds use in metal working fluids due to its emulsifying power and reserve alkalinity. It is also useful in solvent based degreasers for metal cleaning. view less | |
| PEL-INE™ RW-50 | Ele Corporation | PEL-INE™ RW-50 is a nonionic, water-dispersible emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is only dispersible in in water but is soluble in dilute aqueous solutions of acid. It is also s...view more PEL-INE™ RW-50 is a nonionic, water-dispersible emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is only dispersible in in water but is soluble in dilute aqueous solutions of acid. It is also soluble in a variety of organic solvents. PEL-INE™ RW-50 finds use in metal working fluids due its emulsifying power and reserve alkalinity. It is also useful in solvent based degreasers for metal cleaning. view less | |
| PEL-INE™ TAM-5 | Ele Corporation | PEL-INE™ TAM-5 is a cationic surfactant derived from tallow amine. It is useful as an emulsifier, dispersant and wetting agent. It is readily biodegradable. This product is also used in textile processing applications. | |
| PEL-LOK™ L64 | Ele Corporation | PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic...view more PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic. PEL-LOK™ L64 is a liquid at typical ambient temperatures. It has a higher HLB and is soluble in water at room temperature. view less | |
| PEL-PHEN™ 649 | Ele Corporation | PEL-PHEN™ 649 is ethoxylated meta- and para-cresol with 2 moles of ethylene oxide. It is useful for the production of phosphate ester surfactants and hydrotropes. | |
| PEL-PHEN™ 650 | Ele Corporation | PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power ...view more PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power and improving ductility. PEL-PHEN™ 650 is also be used to solubilize top brighteners. Typical use levels range from 2 to 6 grams per liter. view less | |
| PEL-RON™ 219-A | Ele Corporation | PEL-RON™ 219-A is a technical grade of 2,4-Imidazolidinedione,1,3-bis (hydroxymethyl)-5,5-dimethyl-. It is sold as a 55% active, aqueous solution. This product may crystallize if exposed to freezing temperatures, thus freeze protection is warranted during...view more PEL-RON™ 219-A is a technical grade of 2,4-Imidazolidinedione,1,3-bis (hydroxymethyl)-5,5-dimethyl-. It is sold as a 55% active, aqueous solution. This product may crystallize if exposed to freezing temperatures, thus freeze protection is warranted during storage and processing. This product is used as an odor-control agent. view less | |
| PEL-RON™ 822 | Ele Corporation | PEL-RON™ 822 is a unique copper complex that works synergistically with biocidal agents in metal working fluids. It can help to reduce the usual dose of biocide required. For example, the level of isothiazolinone biocide required can be reduced by up to 2...view more PEL-RON™ 822 is a unique copper complex that works synergistically with biocidal agents in metal working fluids. It can help to reduce the usual dose of biocide required. For example, the level of isothiazolinone biocide required can be reduced by up to 20% when formulated with PEL-RON™ 822. It will often eliminate and prevent recurrence of most coolant borne odors such as that of hydrogen sulfide from sulfur reducing bacteria. view less | |
| PEL-HIB™ 869 | Ele Corporation | PEL-HIB™ 869 is an extremely effective rust inhibitor in soft water and in formulations made with soft water. It has a low propensity to foam and it is relatively mild to the skin. As a mixture of triethanolamine salts of carboxylic acids, it will form in...view more PEL-HIB™ 869 is an extremely effective rust inhibitor in soft water and in formulations made with soft water. It has a low propensity to foam and it is relatively mild to the skin. As a mixture of triethanolamine salts of carboxylic acids, it will form insoluble calcium and magnesium soaps in hard water. view less | |
| PEL-HIB™ 1034 | Ele Corporation | PEL-HIB™ 1034 is a boron based additive with low reserve alkalinity allowing easy incorporation into DEA free formulations and providing superior ferrous corrosion protection with reduced staining on non-ferrous materials. This product also works synergis...view more PEL-HIB™ 1034 is a boron based additive with low reserve alkalinity allowing easy incorporation into DEA free formulations and providing superior ferrous corrosion protection with reduced staining on non-ferrous materials. This product also works synergistically with other rust inhibitors. It has a low propensity to foam, is hard water stable and does not form residues. view less | |
| PEL-HIB™ 1159 | Ele Corporation | PEL-HIB™ 1159 has been specifically designed to provide excellent rust inhibition for greases. This ashless rust inhibitor is compatible with lithium soaps and other components such as zinc dialkylditiiophosphate. | |
| PEL-ALC™ B-26-L | Ele Corporation | PEL-ALC™ B-26-L is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition ...view more PEL-ALC™ B-26-L is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties including wetting, emulsification, high temperature stability and dispersion, PEL-ALC™ B-26-L can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. This surfactant is ideally suited for various textile processes, metal cleaners, industrial and institutional cleansers. view less | |
| PEL-ALC™ B-26 | Ele Corporation | PEL-ALC™ B-26 is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to...view more PEL-ALC™ B-26 is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties including wetting, emulsification, high temperature stability and dispersion, PEL-ALC™ B-26 can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. This surfactant is ideally suited for various textile processes, metal cleaners, industrial and institutional cleansers. view less | |
| PEL-ALC™ OA-2 | Ele Corporation | PEL-ALC™ OA-2, a brand of PEG-2 oleyl ether, is 100% active and supplied as a liquid. It is derived from a vegetable-sourced alcohol and is commonly used in pomades and hair coloring products. PEL-ALC OA-2 is an excellent low-foaming water in oil emulsifi...view more PEL-ALC™ OA-2, a brand of PEG-2 oleyl ether, is 100% active and supplied as a liquid. It is derived from a vegetable-sourced alcohol and is commonly used in pomades and hair coloring products. PEL-ALC OA-2 is an excellent low-foaming water in oil emulsifier for personal care, metal working applications, and C&G fluids. It is also an intermediate for use in making phosphate esters and sulfosuccinates. view less | |
| PEL-ALC™ RA-40-L | Ele Corporation | PEL-ALC™ RA-40-L is a linear alcohol alkoxylate based on a renewable feedstock. It is a naturally-derived, low foaming nonionic surfactant that is 100% active and biodegradable. PEL-ALC™ RA-40-L is an excellent detergent for cleaning applications. It perf...view more PEL-ALC™ RA-40-L is a linear alcohol alkoxylate based on a renewable feedstock. It is a naturally-derived, low foaming nonionic surfactant that is 100% active and biodegradable. PEL-ALC™ RA-40-L is an excellent detergent for cleaning applications. It performs as a wetting agent, defoamer, emulsifier and dispersant. In particular, this grade has exceptional grease dispersing properties while generating minimal foam view less | |
| PEL-AMID™ TD-2.6 | Ele Corporation | PEL-AMID™ TD-2.6 is soluble in most mineral oils and is dispersible in water. It is used as a corrosion inhibitor for water miscible metal working fluids and also for oil based corrosion prevention oils. The corrosion protection afforded by an aqueous bas...view more PEL-AMID™ TD-2.6 is soluble in most mineral oils and is dispersible in water. It is used as a corrosion inhibitor for water miscible metal working fluids and also for oil based corrosion prevention oils. The corrosion protection afforded by an aqueous based formulation can be adjusted by raising or lowering the amount of PEL-AMID™ TD-2.6 present. view less | |
| PEL-EST™ 917 | Ele Corporation | PEL-EST™ 917 is a water dispersible surfactant and emulsifier. It functions as an oil in water emulsifier for a host of industrial and personal care applications. The approximate HLB of PEL-EST™ 917 is 9 and produces a very modest amount of foam. | |
| PEL-INE™ 410 | Ele Corporation | PEL-INE™ 410 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatib...view more PEL-INE™ 410 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatible with strong acid or alkali systems. Further, it is an improvement over older types of amphoterics. view less | |
| PEL-INE™ 466 | Ele Corporation | PEL-INE™ 466 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatib...view more PEL-INE™ 466 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatible with strong acid or alkali systems. Further, it is an improvement over older types of amphoterics. It is more water-soluble, has no pronounced isoelectric point (inactivity in a certain pH range) and will tolerate greater amounts of alkali or acid. view less | |
| PEL-PHOS™ 583 | Ele Corporation | PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is ...view more PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, and carbonates. view less | |
| PEL-PHOS™ 884 | Ele Corporation | PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils an...view more PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils and semisynthetic fluids. It is an excellent emulsifier for water-insoluble polyalkylene glycols. PEL-PHOS™ 884 can be used to make microemulsion metal working fluids that are totally synthetic and free from both petroleum and vegetable oils. view less | |
| PEL-PHOS™ H-66 | Ele Corporation | PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-...view more PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-66 is an anionic surfactant. view less | |
| PEL-PHOS™ LK-500 | Ele Corporation | PEL-PHOS™ LK-500 is a phosphate ester based on 1-hexanol ethoxylate. It is soluble in water and polar solvents. PEL-PHOS™ LK-500 is a rust inhibitor, emulsifier and EP agent for synthetic metal working fluids. | |
| PEL-QUAD™ 90R4 | Ele Corporation | PEL-QUAD™ 90R4 is a 100% active, tetrafunctional block copolymer surfactant. It has terminal secondary hydroxyl groups which lessen the amount of foam that it generates in aqueous solution. It functions as an anti-foaming agent, dispersant and emulsifier. | |
| PEL-ROK™ 17R1 | Ele Corporation | PEL-ROK™ 17R1 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2000 Daltons and consists of approximately 15% ethylene oxide and 85% propylene oxide....view more PEL-ROK™ 17R1 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2000 Daltons and consists of approximately 15% ethylene oxide and 85% propylene oxide. PEL-ROK™ 17R1 is a liquid at typical ambient temperatures. It has a fairly low HLB but is soluble in water at room temperature. view less | |
| PEL-ROK™ 17R4 | Ele Corporation | PEL-ROK™ 17R4 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2650 Daltons and is composed of approximately 45% ethylene oxide and 55% propylene oxi...view more PEL-ROK™ 17R4 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2650 Daltons and is composed of approximately 45% ethylene oxide and 55% propylene oxide. PEL-ROK™ 17R4 is a liquid at typical ambient temperatures. It has an HLB of to 7 to 12 and is soluble in water at room temperature. view less | |
| PEL-ROK™ 25R2 | Ele Corporation | PEL-ROK™ 25R2 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 3100 Daltons and is relatively nontoxic. PEL-ROK™ 25R2 is a liquid at typical ambient ...view more PEL-ROK™ 25R2 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 3100 Daltons and is relatively nontoxic. PEL-ROK™ 25R2 is a liquid at typical ambient temperatures. It has an HLB of 1 to 7 and is soluble in water at lower temperatures. view less | |
| PEL-ROK™ 31R1 | Ele Corporation | PEL-ROK™ 31R1 is an effective low-foam, nonionic wetting agent. It is useful as a rinse aid for auto dish washing and as an industrial wetting agent. It is a nonionic block copolymer surfactant with terminal secondary hydroxyl groups. The average molecula...view more PEL-ROK™ 31R1 is an effective low-foam, nonionic wetting agent. It is useful as a rinse aid for auto dish washing and as an industrial wetting agent. It is a nonionic block copolymer surfactant with terminal secondary hydroxyl groups. The average molecular weight of this product is 3250 Daltons and it consists of approximately 15% ethylene oxide and 85% propylene oxide. PEL-ROK™ 31R1 is low foaming as compared with other nonionic surfactants. view less | |
| Durasyn® 166X | INEOS Oligomers | Durasyn® 166X polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricant...view more Durasyn® 166X polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high or wide temperature range conditions. view less | |
| Durasyn® 146 | INEOS Oligomers | Durasyn® 146 polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from C12 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricant...view more Durasyn® 146 polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from C12 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high or wide temperature range conditions. view less | |
| Durasyn® 174 I | INEOS Oligomers | Durasyn® 174 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricant...view more Durasyn® 174 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| Durasyn® 180 I | INEOS Oligomers | Durasyn® 180 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricant...view more Durasyn® 180 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| Durasyn® 180 R | INEOS Oligomers | Durasyn® 180 R high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricant...view more Durasyn® 180 R high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| Emulsogen® COL 100 | Clariant International Ltd. | Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as...view more Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as little as 2-3 % Emulsogen COL 100 in the mineral oil concentrate are sufficient for improved emulsion stability and dispersity. Emulsogen® COL 100 shows also outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate (K-value: approx. 33 according to DIN 53903). view less | |
| Durasyn® 125 | INEOS Oligomers | Durasyn® 125 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 126 | INEOS Oligomers | Durasyn® 126 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 127 | INEOS Oligomers | Durasyn® 127 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 128 | INEOS Oligomers | Durasyn® 128 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 145 | INEOS Oligomers | Durasyn® 145 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 147 | INEOS Oligomers | Durasyn® 147 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 148 | INEOS Oligomers | Durasyn® 148 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Handbook Of Lubrication And Tribology: Volume 1 | STLE (Society of Tribologists & Lubrication Engineers) | Focused on the use of lubricants in a variety of end-use applications, the second edition of the Handbook of Lubrication and Tribology: Volume 1: Application and Maintenance continues to be a cutting-edge contribution to the fields of industrial lubricati...view more Focused on the use of lubricants in a variety of end-use applications, the second edition of the Handbook of Lubrication and Tribology: Volume 1: Application and Maintenance continues to be a cutting-edge contribution to the fields of industrial lubrication and tribology. This edition addresses the latest technology related to testing and maintenance procedures, as well as changes in our understanding of how lubrication principles impact implementation. view less | |
| Contractor-Based Lubrication Programs | STLE (Society of Tribologists & Lubrication Engineers) | Popular in other countries, lubrication outsourcing could find its way to North America as a turnkey solution to precision machine lubrication. | |
| Optimizing Lubrication Effectiveness | STLE (Society of Tribologists & Lubrication Engineers) | This article is about optimizing lubrication effectiveness. | |
| Storing Lubricants | STLE (Society of Tribologists & Lubrication Engineers) | Proper storage and handling helps lubricants last longer. | |
| DAKOLUB® MB 2430 | DAKO AG | DAKOLUB® MB 2430 is a water-miscible emulsifier/dispersing agent. It shows good emulsifying and lubricating effect. DAKOLUB® MB 2430 is suitable for the formulation of water-miscible lubricants. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| UCON™ LB-65 | Dow Performance Lubricants | UCON™ LB-65 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not ...view more UCON™ LB-65 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ LB-285 | Dow Performance Lubricants | UCON™ LB-285 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not...view more UCON™ LB-285 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ LB-385 | Dow Performance Lubricants | UCON™ LB-385 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not...view more UCON™ LB-385 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ LB-525 | Dow Performance Lubricants | UCON™ LB-525 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not...view more UCON™ LB-525 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ TPEG 500 | Dow Performance Lubricants | UCON™ TPEG 500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance n...view more UCON™ TPEG 500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ TPEG 990 | Dow Performance Lubricants | UCON™ TPEG 900 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance n...view more UCON™ TPEG 900 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ LB-625 | Dow Performance Lubricants | UCON™ LB-625 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not...view more UCON™ LB-625 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ LB-1145 | Dow Performance Lubricants | UCON™ LB-1145 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance no...view more UCON™ LB-1145 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ 75-H-1400 | Dow Performance Lubricants | UCON™ 75-H-1400 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance ...view more UCON™ 75-H-1400 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ 75-H-9500 | Dow Performance Lubricants | UCON™ 75-H-9500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance ...view more UCON™ 75-H-9500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| UCON™ 75-H-90000 | Dow Performance Lubricants | UCON™ 75-H-90000 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance...view more UCON™ 75-H-90000 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less | |
| GEOlube® B 35 | GEO Specialty Chemicals | GEOlube® B 35 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 33 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...view more GEOlube® B 35 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 33 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 46 | GEO Specialty Chemicals | GEOlube® B 46 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 46 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...view more GEOlube® B 46 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 46 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 55 | GEO Specialty Chemicals | GEOlube® B 55 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 56 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...view more GEOlube® B 55 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 56 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 68 | GEO Specialty Chemicals | GEOlube® B 68 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 68 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...view more GEOlube® B 68 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 68 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 75 | GEO Specialty Chemicals | GEOlube® B 75 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 76 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...view more GEOlube® B 75 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 76 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 100 | GEO Specialty Chemicals | GEOlube® B 100 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 100 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...view more GEOlube® B 100 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 100 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 125 | GEO Specialty Chemicals | GEOlube® B 125 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 122 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...view more GEOlube® B 125 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 122 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 150 | GEO Specialty Chemicals | GEOlube® B 150 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...view more GEOlube® B 150 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 225 | GEO Specialty Chemicals | GEOlube® B 225 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 224 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...view more GEOlube® B 225 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 224 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| GEOlube® B 335 | GEO Specialty Chemicals | GEOlube® B 335 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 330 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...view more GEOlube® B 335 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 330 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. view less | |
| UCON™ LB-1715 | Dow Performance Lubricants | UCON™ LB-1715 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance no...view more UCON™ LB-1715 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants. view less |
