| Emulsogen® COL 100 | Clariant International Ltd. | Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as...view more Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as little as 2-3 % Emulsogen COL 100 in the mineral oil concentrate are sufficient for improved emulsion stability and dispersity. Emulsogen® COL 100 shows also outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate (K-value: approx. 33 according to DIN 53903). view less | |
| Emulsogen® MTP 030 | Clariant International Ltd. | Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able t...view more Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able to disperse large quantities of calcium oleate or tallate. When applied as a nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 030 is highly compatible with anionic and other nonionic formulation components. Because of its excellent solubility in almost all kinds of mineral oils, this product can be used as an anti-wear additive to improve lubricity. It also performs as a better lubricant than mineral oil and TMP-trioleate. view less | |
| Emulsogen® MTP 070 | Clariant International Ltd. | Emulsogen® MTP 070 is an excellent emulsifier for mineral oils and vegetable oil. Already 5% of Emulsogen® MTP 070, calculated on the amount of mineral oil to be emulsified is sufficient for stable emulsions. For rape seed oil approx. 15-20% Emulsogen® MT...view more Emulsogen® MTP 070 is an excellent emulsifier for mineral oils and vegetable oil. Already 5% of Emulsogen® MTP 070, calculated on the amount of mineral oil to be emulsified is sufficient for stable emulsions. For rape seed oil approx. 15-20% Emulsogen® MTP 070 is necessary; the emulsions are stable for more then 14 days. Emulsogen® MTP 070 shows also outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate (K-value: approx. 20 - 25 g according to DIN 53903). When applied as nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 070 is highly compatible with anionic and other nonionic formulation components. view less | |
| Genamin® 3920 | Clariant International Ltd. | Genamin® 3920 can be used as neutralizing agent in emulsifiable metal working fluids, having good oil solubility and a base strength comparable to triethanolamine (TEA). Due to the high boiling point, Genamin® 3920 is an almost nonvolatile component, whic...view more Genamin® 3920 can be used as neutralizing agent in emulsifiable metal working fluids, having good oil solubility and a base strength comparable to triethanolamine (TEA). Due to the high boiling point, Genamin® 3920 is an almost nonvolatile component, which can be used for high temperature operations, e.g. heavy chip removal operations and emulsion cleaners applied at 80°C or higher. Genamin® 3920 is surface active and shows good emulsifying properties and improves the dispersibility and stability of emulsions. Occasionally Genamin® 3920 can improve spontaneity and shorten the emulsifying time considerably. Due to the foam properties Genamin® 3920 is not recommended for the use in fully synthetic fluids. view less | |
| Genamin® CH 020 | Clariant International Ltd. | Genamin® CH 020 can be used as a neutralizing agent in emulsifiable and fully synthetic metal working fluids, as well as in metal cleaners. Genamin® CH 020 is water soluble, easy to formulate and has a base strength in between Diethanolamine (DEA) and Tri...view more Genamin® CH 020 can be used as a neutralizing agent in emulsifiable and fully synthetic metal working fluids, as well as in metal cleaners. Genamin® CH 020 is water soluble, easy to formulate and has a base strength in between Diethanolamine (DEA) and Triethanolamine (TEA). Due to the high boiling point, Genamin® CH 020 is an almost nonvolatile component, which can be used for high temperature operations, e.g. heavy chip removal operations and emulsion cleaners applied at 80°C or higher. Genamin® CH 020 is multifunctional additive which has a very low tendency to leach copper and cobalt, a very low foaming tendency - ideal for high pressure operations, and also acts as a hydrotrope in fully synthetic and metalworking fluids and cleaners. view less | |
| Genapol® PN 30 | Clariant International Ltd. | Genapol® PN 30 is a low-foaming, nonionic lubrication and wetting agent. In combination with corrosion inhibitors like Hostacor® IT, Hostacor® BIT or Hostacor® BI, clear water soluble metal working fluids with good corrosion protecting and lubricating pro...view more Genapol® PN 30 is a low-foaming, nonionic lubrication and wetting agent. In combination with corrosion inhibitors like Hostacor® IT, Hostacor® BIT or Hostacor® BI, clear water soluble metal working fluids with good corrosion protecting and lubricating properties are obtained. view less | |
| Genapol® PS | Clariant International Ltd. | Genapol® PS is a water soluble mineral oil free and almost inflammable lubricant. Genapol PS is designed for the use in fully synthetic metal working fluids such asgrinding fluids and fire resistant hydraulic fluids (HFA S-types). The “reverse solubility”...view more Genapol® PS is a water soluble mineral oil free and almost inflammable lubricant. Genapol PS is designed for the use in fully synthetic metal working fluids such asgrinding fluids and fire resistant hydraulic fluids (HFA S-types). The “reverse solubility” reduces foam generation and foam stability. view less | |
| Hostacor® ITD | Clariant International Ltd. | Hostacor® ITD is used as a lubricity and extreme pressure anti wear additive in industrial lubricants. It provides excellent corrosion inhibition for aluminum alloys and ferrous metals. | |
| Hostagliss® L4 | Clariant International Ltd. | Hostagliss® L4 is an emulsifiable, chlorine free lubricant additive. It is a polar polymer containing in addition an acid function which can be neutralised. The multiple functional groups of the polymer are exhibiting a high affinity to metal surfaces. | |
| Hostagliss® PA 135 | Clariant International Ltd. | Hostagliss® PA 135 is an oil soluble additive for lubricants. It has good lubricity and anti wear properties. Therefore it is used as a component of non water miscible metal working fluids such as cutting oils or deep drawing oils. Other applications are ...view more Hostagliss® PA 135 is an oil soluble additive for lubricants. It has good lubricity and anti wear properties. Therefore it is used as a component of non water miscible metal working fluids such as cutting oils or deep drawing oils. Other applications are gear/engine oils and greases. Hostagliss® PA 135 can be also used as an additive for emulsifiable metal working fluids to improve anti wear properties. Because of its outstanding solubility in all kinds of mineral oils, this product is easy to formulate. Compatability with other formulating components commonly used for emulsifiable metal working fluids is excellent. Hostagliss® PA 135 shows also a quite good hydrolytic stability. view less |
