| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...view more PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...view more n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. view less | |
| CN925 | Sartomer Americas | CN925 is a low viscosity modified aliphatic urethane tetraacrylate for use in UV & EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, low viscosity, solvent resistance, and hardness. | |
| CN963B80 | Sartomer Americas | CN963B80 is a difunctional aliphatic polyester urethane acrylate oligomer, supplied in HDDA for use in UV and EB curing coatings, inks and adhesives. This product has excellent weathering characteristics, balance of tensile properties, and flexibility. | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| ADDITOL® VXW 4973 | Allnex | ADDITOL® VXW 4973 is a highly effective defoamer on mineral oil basis for foam prevention in plastic dispersions, emulsion paints, dispersion paints, dispersion adhesives and plastic renderings, without silicone addition. | Request Sample |
| ULTRAMER® NS 485 | Ultrakim Kimya San. ve Tic. A.Åž. | ULTRAMER® NS 485, in the form of a yellow, turbid liquid, is a 100% active non-silicone antifoam compound. This product can be used in masonry paints and coatings, water-based inks, and adhesive systems. | |
| Additive ST2/14 | Ichemco | Additive ST2/14 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| AGITAN® 527 | Munzing Chemie | AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, indus...view more AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. view less | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| AGITAN® 103 | Munzing Chemie | AGITAN® 103 is a liquid white blend of modified fatty derivatives, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 107 | Munzing Chemie | AGITAN® 107 is a liquid white blend of hydrophobic silica and alkoxylated compounds in emulsion form. It has excellent stability and defoaming efficiency. It is mainly used in architectural and paper coatings, printing inks and adhesives. | |
| AGITAN® 150 | Munzing Chemie | AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesi...view more AGITAN® 150 is a liquid white aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. view less | |
| AGITAN® 155 | Munzing Chemie | AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adh...view more AGITAN® 155 is a liquid white an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is mainly used in industrial and wood coatings, printing inks and adhesives. view less | |
| GENORAD* 24 | Rahn AG | GENORAD* 24 is the latest complement to RAHN'S stabilizer product range. GENORAD* 24 is a unique all-purpose in-can stabilizer for UV LED and other (UV cured) free radical inks, coatings and adhesives. | Request Sample |
| CIT/MIT-14M | Dalian Bio-Chem Co., Ltd. | CIT/MIT-14M is an anti-microbial that comes in a yellow transparent liquid. This product has a density of 1.27 to 1.33 g/ml. It is used in paints, adhesives, inks, and dyes. This product is not combustible and is VOC-free. | |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation | SM6104 is a standard bisphenol A epoxy diacrylate. It provides low viscosity and light color, and offers high gloss, hardness and excellent chemical resistance. This product is widely used in UV coatings, inks and adhesives, and more. | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...view more PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...view more PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...view more PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...view more PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...view more PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...view more PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| Polurene T 70 AE | S.A.P.I.C.I. SpA | Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings w...view more Polurene T 70 AE is an aliphatic polyisocyanate. When diluted, this product can be used to improve the performance of short or long oil drying resins. It can be used in 2K laminating adhesives and inks. It can also be used in 2K polyurethane coatings with good chemical and weather resistance. This product contains less than .5% IPDI isocyanates. view less | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...view more Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. view less | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. | FD-804 is an aluminate coupling agent. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in resins containing -OH. | |
| Additive ST2/14 ECO | Ichemco | Additive ST2/14 ECO is a polycondensed urethane solution in aliphatic solvents. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| Tetrahydrofuran | Chemceed | Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or che...view more Tetrahydrofuran (THF) is a versatile, highly polar solvent that is used in the manufacturer of adhesives, cellophane, elastomers, inks, pharmaceuticals, polyurethane coatings, PVC cement, and vinyl films. THF is used as a precursor to many polymers or chemical syntheses. view less | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| AGITAN® 105 | Munzing Chemie | AGITAN® 105 is a liquid white blend of modified fatty compounds, hydrophobic silica, alkoxylated compounds and emulsifiers. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® 109 | Munzing Chemie | AGITAN® 109 is a liquid white blend of hydrophobic silica, alkoxylated compounds and vegetable oils in emulsion form. It has excellent stability and defoaming persistency. It is mainly used in architectural coatings, printing inks and adhesives. | |
| DISPERBYK®-2015 BF | BYK | DISPERBYK®-2015 BF is a VOC- and solvent-free wetting and dispersing additive for aqueous coatings, printing inks, adhesives and care products. For resin-free pigment concentrates. Biocide-free version of DISPERBYK-2015. | |
| GENOMER* 4293 | Rahn AG | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...view more GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. view less | Request Sample |
| ADDITOL® VXW 6235 | Allnex | ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...view more ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. view less | Request Sample |
| BECKOPOX™ EP 147w | Allnex | BECKOPOX™ EP 147w is a non-crystallizing Bisphenol A/F liquid epoxy resin containing cross-linkable emulsifiers. It is used in primers/coatings on mineral and metallic substrates, and adhesives and water-washable jointing-compounds for tiles. | Request Sample |
| CN970A60 | Sartomer Americas | CN970A60 is a hard trifunctional aromatic urethane acrylate oligomer, diluted in TDGDA for use in UV and EB curing coatings, inks and adhesives. This product's characteristics include high gloss, good chemical and abrasion resistance, and high reactivity. | |
| GENOCURE* CPK | Rahn AG | GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. | Request Sample |
| SR395 | Sartomer Americas | SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resis...view more SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resistance. view less | |
| SR494 | Sartomer Americas | SR494 is a low viscosity tetrafunctional oligoether acrylate that can be polymerized by free radicals. In particular, it is used in UV and EB cured coatings, inks and adhesives. This product has good solvency, high reactivity and low skin irritation. | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| Kamin® 35B | KaMin Solutions | Kamin® 35B is a general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used principally in water-based adhesives, paints, inks or where low surface area is important. | |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. This product comes in the physical form of spray dried beads or slurry. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...view more Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. view less | |
| AGITAN® 350 | Munzing Chemie | AGITAN® 350 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 351 | Munzing Chemie | AGITAN® 351 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 765 | Munzing Chemie | AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhe...view more AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® E 256 | Munzing Chemie | AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and w...view more AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. view less | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| MIRAMER LR3130 | Rahn AG | MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overpri...view more MIRAMER LR3130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It is ideal for use in printing inks and varnishes, paper and board varnishes, wood and industrial coatings, plastic coatings and overprint varnishes. view less | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less | Request Sample |
| Venadol™ 85 | Harcros Chemicals, Inc. | Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...view more Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...view more PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...view more PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...view more PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...view more PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...view more PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...view more PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...view more PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. view less | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...view more PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...view more PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...view more AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. view less | |
| Methyl Acrylate (MA) | JURONG CHEMICAL | Methyl Acrylate, in the form of a clear, colorless, volatile liquid, is an industrial solvent that can be used in paints, coatings, adhesives, and inks. If it is used in latex paint, the end product will be water resistant and weather resistant, and have...view more Methyl Acrylate, in the form of a clear, colorless, volatile liquid, is an industrial solvent that can be used in paints, coatings, adhesives, and inks. If it is used in latex paint, the end product will be water resistant and weather resistant, and have low temperature flexibility. view less | |
| AGITAN® 767 | Munzing Chemie | AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well a...view more AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® E 255 | Munzing Chemie | AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coat...view more AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. view less | |
| DEE FO® 1015 | Munzing Chemie | DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and a...view more DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| FOAM BAN® SB-88 | Munzing Chemie | FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhes...view more FOAM BAN® SB-88 is a liquid yellow-brown, turbid defoamer that is a blend of hydrophobic silica and mineral oil. It is a defoamer for aqueous systems that is commonluy used in industrial, architectural and wood coatings, as well as printing inks and adhesives. view less | |
| FOAMTROL 105 | Munzing Chemie | FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and pri...view more FOAMTROL 105 is a translucent grey defoamer for aqueous systems. It is a low viscosity silicone compound that is used in non-aqueous and aqueous products and systems. It is used to prepare silicone-based foam and is also commonly used in adhesives and printing inks. view less | |
| FOAMTROL 410 | Munzing Chemie | FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and...view more FOAMTROL 410 is a liquid off-white opaque defoamer for aqueous systems that silicone emulsion in water. It is primarily an active, food-grade, silicone emulsion that is used for food-contact approved products and is also used as a defoamer in coatings and adhesives. view less | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...view more ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. view less | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...view more Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. view less | |
| HEXAFOR™ 675 | Maflon SRL | HEXAFOR™ 675 is a non-ionic clear liquid. It is used as a fluorosurfactant to improve wetting and reduce surface tension at low concentrations. HEXAFOR™ 675 can be used in paint, coating, ink, wax, polish, and adhesive applications. | |
| GENOMER* 4212 | Rahn AG | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...view more GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. view less | Request Sample |
| Polyamide Resin PA-508 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-508 is a alcohol-soluble polyamide resin. It has good solvent release and strong adhesive power. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. | |
| Venadol™ 65 | Harcros Chemicals, Inc. | Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...view more Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less | |
| VISIOMER®Terra IBOMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra IBOMA is bulky side chain alkyl methacrylate monomer with very high Tg. It provide polymers with reduced viscosity , thus allowing a higher solids content. Suggested applications include coatings and adhesive applications. | |
| Polytone AP 109 | Polyols and Polymers | Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...view more Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 109 is primarily used to impart good open time combined with green tack and durability, and provides some heat resistance similar to Polytone AP 108 but not as strong of resistance. Polytone AP 109 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. view less | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...view more Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. view less | |
| Unithane SX-487 SF | Union Specialties, Inc. | Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 10...view more Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for graphic arts, wood, adhesives, and paints. view less | |
| Unithane IC-803 | Union Specialties, Inc. | Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of ...view more Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 150cps. It is suitable for use in a formulated coating for graphic arts, metal, automotive, paints, and adhesives. view less | |
| Unithane IC-807 SF | Union Specialties, Inc. | Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is devel...view more Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is developed for use in a formulated coating for graphic arts, concrete, paint, automotive, inks, and adhesives. view less | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...view more Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...view more Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...view more Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. view less | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...view more SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| Unithane IC-400 | Union Specialties, Inc. | Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suit...view more Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suitable for use in a formulated coating or sealer coat for wood, paint, inks, adhesives, and graphic arts. view less | |
| GENOMER* 2253 | Rahn AG | GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and v...view more GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and varnishes for paper, board and plastics. view less | Request Sample |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Polyplate® P | KaMin Solutions | Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable. | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. | FD-805 is aluminum-iv-acetylacetonate supplied as a white powder. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in some special resins. |
