| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Polimelt P102 | Respol Resinas | Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. ...view more Polimelt P102 is a tail oil rosin ester that can be used in road marking inks. This product has a softening point between 100-106 degrees Celsius and is designed for formulations with good resistance to thermal degradation and good oxidation stability. Its acid value is less than 15 mg of potassium hydroxide per gram. view less | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. | FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...view more FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. view less | |
| POLYETHERAMINE MA-2200 | DKSH | POLYETHERAMINE MA-2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-2200 is about 2000. POLYETHERAMINE MA-2200 is a clear liquid with amine-like odor. It is ...view more POLYETHERAMINE MA-2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-2200 is about 2000. POLYETHERAMINE MA-2200 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents and polyurea. view less | Request Sample |
| POLYETHERAMINE MA-223 | DKSH | POLYETHERAMINE MA-223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-223 is about 230. POLYETHERAMINE MA-223 is a clear liquid with amine-like odor. It is idea...view more POLYETHERAMINE MA-223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-223 is about 230. POLYETHERAMINE MA-223 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. view less | Request Sample |
| POLYETHERAMINE MA-240 | DKSH | POLYETHERAMINE MA-240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-240 is about 430. POLYETHERAMINE MA-240 is a clear liquid with amine-like odor. It is idea...view more POLYETHERAMINE MA-240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-240 is about 430. POLYETHERAMINE MA-240 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. This product is available in Europe and North America. view less | Request Sample |
| POLYETHERAMINE MA-340 | DKSH | POLYETHERAMINE MA 340 is a trifunctional primary amine having an average molecular weight of approximately 440. | Request Sample |
| Polyslip™ FA 06 E | Lawter | Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solve...view more Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solvent borne and aqueous inks and coatings. view less | |
| Polyslip™ FA 09 E | Lawter | Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes...view more Polyslip™ FA 09 E is a solvent-based wax dispersion that has a stabilizing agent to reduce dephasing in storage. It is used as an additive to provide slip, scratch, block and rub resistance in water and solvent-based coatings, inks and overprint varnishes. The product is used in packaging and gravure inks and in solvent borne and aqueous inks and coatings. view less | |
| Polyslip™ VM 55 E | Lawter | Polyslip™ VM 55 E is a solvent-based wax dispersion consisting of a mix of n-butylacetate and xylene that offers good stability in metallic base coats that are subsequently varnished. It is primarily used in metallized base coats. | |
| Polyslip™ VM 70 E | Lawter | Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in v...view more Polyslip™ VM 70 E is a solvent-based wax dispersion consisting of a combination of carnauba wax in solvent "150" and isopropanol. It has good slip, scratch resistance and leveling properties and does not lose gloss. The product is used as a lubricant in various applications including 2-piece whites and clear coats, solvent borne coatings, lacquers and varnishes. view less | |
| Polyslip™ VS 86 E | Lawter | Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling...view more Polyslip™ VS 86 E is a solvent-based wax dispersion consisting of a combination of solvents like pine oil, solvent "150", methoxypropanol and n-butanol. It is used as a lubricant, offering good slip and scratch resistance with gloss retention and leveling as added features. The product is used in solvent borne can coatings, internal lacquers, 2-piece white and clear coats and finishing varnishes. view less | |
| Polysperse™ E | Lawter | Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. ...view more Polysperse™ E is a micronized synthetic wax that has good rub and scuff resistance properties along with ideal surface slip, gloss and low surface tension. It is used in all printing inks including gravure, offset, screen inks and coatings and varnishes. The product also has uses in sheet-fed, heatset and offset inks. view less | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| PowderTEX 61 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...view more Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. view less | |
| PRINTPLEX® MK 3025 | Munzing Chemie | PRINTPLEX® MK 3025 is a white micronized fine powder that is made of ethylenediaminetetraacetic acid and disodium salt. It has multivalent metal ions and is a retarding agent that is used in printing inks. | |
| Propyl Gallate | Derbiotec | Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant...view more Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant. It can be used in the Food industry to avoid the oxidation of oils and fats. As an additive, it may be found in edible fats, oils, mayonnaise, fresh pork sausage, dried meat, shortening, baked goods, candy and dried milk. Also it is used in hair grooming products. view less | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...view more Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. view less | |
| PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...view more PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. view less | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. view less | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. view less | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...view more R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. view less | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...view more R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...view more R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...view more R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...view more R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...view more R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. view less | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...view more R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. view less | |
| R-8012 Masonry Water Repellent | Zhejiang Feidian Chemical Co., Ltd. | R-8012 Masonry Water Repellent is an alkoxy siloxane emulsion. It has great waterproofing ability, high permeability, reduced water absorption of substrate, and excellent coating properties. This product is recommended for water repellent treatments for c...view more R-8012 Masonry Water Repellent is an alkoxy siloxane emulsion. It has great waterproofing ability, high permeability, reduced water absorption of substrate, and excellent coating properties. This product is recommended for water repellent treatments for concrete, masonry, bricks and tiles, wood, coatings, and gypsum mortar. view less | |
| R-8601 Alkyl Modified Polysiloxane | Zhejiang Feidian Chemical Co., Ltd. | R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorg...view more R-8601 Alkyl Modified Polysiloxane offers functional reactivity, good surface wetting, and low risk of precipitation. Its benefits also include comprehensive versatility, improved mechanical property of composites, and improved compatibility between inorganic fillers and polymers. view less | |
| Raybo 43 MarHard | Raybo Chemical | Raybo 43 MarHard is a silicone-free additive in a workable paste to thin liquid form, depending on temperature. This product is most commonly used to improve scratch and mar resistance in solventborne bake coating and ink system applications. | |
| Raybo 6 AntiSag | Raybo Chemical | Raybo 6 AntiSag is a dispersing agent in a liquid form. This product is most commonly used to control sag in solvent-based ink and coating system applications. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| Raybo 77 AlGel | Raybo Chemical | Raybo 77 AlGel is an ink additive . This product is most commonly used to form stable aluminum octoate gels in petroleum-based ink applications. Aluminum octoate gels made with RAYBO 77 have more initial flow plus the flow and viscosity are stable and r...view more Raybo 77 AlGel is an ink additive . This product is most commonly used to form stable aluminum octoate gels in petroleum-based ink applications. Aluminum octoate gels made with RAYBO 77 have more initial flow plus the flow and viscosity are stable and remain so on aging. view less | |
| Raybo 82 AntiStat | Raybo Chemical | Raybo 82 AntiStat is a coating and ink additive in an amber liquid form. This product is most commonly used to eliminate static charges in solvent-based ink and coating system applications. | |
| Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
| Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
| RESAMIN® HF 480 | Allnex | Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is l...view more Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability. view less | Request Sample |
| Reservol Flake | Tiarco Chemical | Reservol Flake is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of yellow to tan flakes. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| Reservol Liquid | Tiarco Chemical | Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continu...view more Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. view less | |
| Reservol Powder | Tiarco Chemical | Reservol Powder is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of a yellow to tan powder. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based...view more Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Resina R 35 | Ichemco | Resina R 35 is a natural rubber-based cyclized rubber. This product is most commonly used in food packaging ink formulation and high thermal and chemical resistant varnish production applications. | |
| RESYDROL® EZ 6639w/32WA | Allnex | RESYDROL® EZ 6639w/32WA is a grinding resin and edge protection additive for use in cathodic electro deposition paints. It allows the production of highly pigmented stable pastes with low content of organic solvents. The recommended dosage is from 1-8% ca...view more RESYDROL® EZ 6639w/32WA is a grinding resin and edge protection additive for use in cathodic electro deposition paints. It allows the production of highly pigmented stable pastes with low content of organic solvents. The recommended dosage is from 1-8% calculated solid on solid. view less | Request Sample |
| REWOPAL® M 365 | Evonik Operations GmbH, BL Coating Additives | REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints. | Request Sample |
| RHEOBYK-7591 | BYK | RHEOBYK-7591 is a rheology and processing additive for powder coatings particularly suitable for use in powder coating systems, and in this segment it is broadly compatible with various binders. | |
| RHEOBYK-H 3300 VF | BYK | RHEOBYK-H 3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of RHEOBYK-H 3300 VF will increase body by ge...view more RHEOBYK-H 3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of RHEOBYK-H 3300 VF will increase body by generating low shear viscosity with some impact on high shear viscosity. view less | |
| RHEOBYK-L 1400 VF | BYK | RHEOBYK-L 1400 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. This product is designed to thicken dispersion (latex) paints. It may be used with acrylic, styrene/acrylic, and vinyl ace...view more RHEOBYK-L 1400 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. This product is designed to thicken dispersion (latex) paints. It may be used with acrylic, styrene/acrylic, and vinyl acetate copolymer latexes. view less | |
| RHEOLATE® PHX 7025 | DKSH | RHEOLATE® PHX 7025 is a high-efficiency polyether polyurethane thickener developed for use in aqueous systems. The product is supplied as a white free-flowing powder and enables formulations of odorless paints free of organic solvent. and other certifica...view more RHEOLATE® PHX 7025 is a high-efficiency polyether polyurethane thickener developed for use in aqueous systems. The product is supplied as a white free-flowing powder and enables formulations of odorless paints free of organic solvent. and other certificates. The product is suitable for anti-asthma and anti-allergy paints. view less | Request Sample |
| RHEOLATE® 1 | Elementis | RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rhe...view more RHEOLATE® 1 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener with a high thickening efficiency in the medium-shear-rate range and imparts excellent pigment suspension properties. Unlike other acrylic thickeners, RHEOLATE® 1 rheology modifier does not impair gloss and is suitable for various waterborne paint and coating systems. view less | |
| RHEOLATE® 150 | Elementis | RHEOLATE® 150 rheological additive is a versatile hydrophobically modified aqueous alkali swellable acrylic (HASE) thickener in an easy to use emulsion form designed to provide excellent low-mid shear viscosity build for waterborne decorative coatings. RH...view more RHEOLATE® 150 rheological additive is a versatile hydrophobically modified aqueous alkali swellable acrylic (HASE) thickener in an easy to use emulsion form designed to provide excellent low-mid shear viscosity build for waterborne decorative coatings. RHEOLATE® 150 rheology modifier is very cost effective in medium to high PVC formulations and can be a good alternative to cellulosic thickeners. view less | |
| RHEOLATE® 2001 | Elementis | RHEOLATE® 2001 rheological additive is a highly efficient, pourable liquid, aqueous anti settling agent for use in waterborne coatings and inks. | |
| RHEOLATE® 212 | Elementis | RHEOLATE® 212 rheological additive is a 20% solids, VOC-free polyether polyurethane associative thickener (NISAT) for waterborne applications. This rheology modifier is designed for use in aqueous emulsion paints and other waterborne systems including ink...view more RHEOLATE® 212 rheological additive is a 20% solids, VOC-free polyether polyurethane associative thickener (NISAT) for waterborne applications. This rheology modifier is designed for use in aqueous emulsion paints and other waterborne systems including inks, textile coatings, adhesives and sealants where maintaining viscosity at high shear during product application and improved film leveling are required. view less | |
| RHEOLATE® 255 | Elementis | RHEOLATE® 255 rheological additive is a 25 % aqueous solution polyether polyurethane associative thickener (NISAT) designed for use in conventional waterborne emulsion systems that is a rheology modifier with a high thickening effect in the medium-shear ...view more RHEOLATE® 255 rheological additive is a 25 % aqueous solution polyether polyurethane associative thickener (NISAT) designed for use in conventional waterborne emulsion systems that is a rheology modifier with a high thickening effect in the medium-shear range. view less | |
| RHEOLATE® 278 TF | Elementis | RHEOLATE® 278 TF rheological additive is an aqueous polyether polyurethane associative thickener (NISAT) for waterborne latex paints. RHEOLATE® 278 TF is a rheology modifier with superior thickening efficiency in the high-shear range – beyond that of oth...view more RHEOLATE® 278 TF rheological additive is an aqueous polyether polyurethane associative thickener (NISAT) for waterborne latex paints. RHEOLATE® 278 TF is a rheology modifier with superior thickening efficiency in the high-shear range – beyond that of other thickeners. view less | |
| RHEOLATE® 288 | Elementis | RHEOLATE® 288 rheological additive is an aqueous polyether polyurethane associative thickener (NISAT) designed specifically for waterborne clear-coat systems. RHEOLATE® 288 is a highly efficient rheology modifier. | |
| RHEOLATE® 299 | Elementis | RHEOLATE® 299 rheological additive is a 25% active aqueous polyether polyurethane associative thickener (NISAT) designed for waterborne industrial and decorative, pigmented and clear, gloss and high gloss coating systems. This rheology modifier is a highl...view more RHEOLATE® 299 rheological additive is a 25% active aqueous polyether polyurethane associative thickener (NISAT) designed for waterborne industrial and decorative, pigmented and clear, gloss and high gloss coating systems. This rheology modifier is a highly efficient viscosity builder in the low- to mid-shear rate range. It provides strongly shear thinning flow behaviour which makes it ideal for spray applications including sprayed latex emulsions, dispersions, water reducible clear-coats and high gloss pigmented systems. view less | |
| RHEOLATE® 350 D | Elementis | RHEOLATE® 350 D rheological additive is a 50% active aqueous polyether polyurethane associative thickener (NISAT) designed to impart high-shear viscosity in conventional waterborne latex and water-reducible systems. This rheology modifier provides excepti...view more RHEOLATE® 350 D rheological additive is a 50% active aqueous polyether polyurethane associative thickener (NISAT) designed to impart high-shear viscosity in conventional waterborne latex and water-reducible systems. This rheology modifier provides exceptional flow and levelling and is particularly suitable for use with small-particle-size resins in gloss and semi-gloss paints. view less | |
| RHEOLATE® 425 | Elementis | RHEOLATE® 425 rheological additive is an economical and versatile aqueous alkali swellable acrylic (HASE) thickener designed to fully or partially replace cellulosic thickeners in a variety of waterborne systems. This rheology modifier is supplied in an e...view more RHEOLATE® 425 rheological additive is an economical and versatile aqueous alkali swellable acrylic (HASE) thickener designed to fully or partially replace cellulosic thickeners in a variety of waterborne systems. This rheology modifier is supplied in an easy-to-use liquid emulsion form and is based on NPE-free ingredients to satisfy environmental concerns. view less | |
| RHEOLATE® 465 | Elementis | RHEOLATE® 465 rheological additive is a strongly hydrophobically modified alkali swellable acrylic (HASE) thickener for waterborne paints and aqueous coatings. RHEOLATE® 465 demonstrates both ionic and associative thickening mechanisms with an excellent b...view more RHEOLATE® 465 rheological additive is a strongly hydrophobically modified alkali swellable acrylic (HASE) thickener for waterborne paints and aqueous coatings. RHEOLATE® 465 demonstrates both ionic and associative thickening mechanisms with an excellent balance of the respective properties. This rheology modifier will provide both mid and high shear rate viscosity with balanced performance for superior package and application properties. view less | |
| RHEOLATE® 655 | Elementis | RHEOLATE® 655 rheological additive is a polyether polyurethane associative thickener (NISAT) designed for use in low VOC waterborne latex systems. This rheology modifier provides aqueous thickening efficiency primarily in the medium-shear rate range (Stor...view more RHEOLATE® 655 rheological additive is a polyether polyurethane associative thickener (NISAT) designed for use in low VOC waterborne latex systems. This rheology modifier provides aqueous thickening efficiency primarily in the medium-shear rate range (Stormer, KU) viscosity. view less | |
| RHEOLATE® 678 | Elementis | RHEOLATE® 678 rheological additive is a polyether polyurethane associative thickener (NISAT) designed for use in waterborne paints based on a wide range of latex systems. This product is an aqueous additive with superior thickening efficiency in both the...view more RHEOLATE® 678 rheological additive is a polyether polyurethane associative thickener (NISAT) designed for use in waterborne paints based on a wide range of latex systems. This product is an aqueous additive with superior thickening efficiency in both the mid- and high- shear rate ranges. view less | |
| RHEOLATE® HX 6010 | Elementis | RHEOLATE® HX 6010 is a 21% active solids, nonionic synthetic associative thickener for aqueous applications. It is designed as Newtonian high shear (ICI) builder for very low VOC paints. It is highly efficient, has very low contribution to low and mid she...view more RHEOLATE® HX 6010 is a 21% active solids, nonionic synthetic associative thickener for aqueous applications. It is designed as Newtonian high shear (ICI) builder for very low VOC paints. It is highly efficient, has very low contribution to low and mid shear viscosity and provides excellent tinting stability. view less | |
| RHEOLATE® HX 6050 IF | DKSH | RHEOLATE® HX 6050 IF is a highly efficient, nonionic synthetic thickener for low and zero-VOC paints, suitable for various aqueous applications, including latex paints, adhesives, inks, sealants, and more. It offers excellent sag and leveling control and ...view more RHEOLATE® HX 6050 IF is a highly efficient, nonionic synthetic thickener for low and zero-VOC paints, suitable for various aqueous applications, including latex paints, adhesives, inks, sealants, and more. It offers excellent sag and leveling control and is biocide-free. view less | Request Sample |
| Ritardante C Nitro | Ichemco | Ritardante C Nitro is a methoxy propanol solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PP Nitro. | |
| Ritardante C PAM | Ichemco | Ritardante C PAM is an isobutyl alcohol solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PP PAM+Add and Color Ink PP PAMC. | |
| Ritardante C PVC | Ichemco | Ritardante C PVC is a cyclohexanone solvent-based ink additive. This product is most commonly used to decrease drying time in applications using Color Ink PVC. | |
| Ruantatxib | Jiangsu Runtai Chemical Co., Ltd. | Ruantatxib, in the form of a colorless, transparent liquid, is a plasticizer that can be used in surface coatings and inks. This product is compatible with all primary and secondary plasticizers. This product contains less than .3% isobutyric acid. | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies b.v.b.a. | S-232-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommended for use in water based inks. | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies b.v.b.a. | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-363 (Polyethylene Wax Alloy) | Shamrock Technologies b.v.b.a. | S-363 is a polyethylene wax alloy showing melting peaks ranging from 92 – 141°C. S-363 is recommended for use in liquid inks. | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| S-379-N8 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-379-N8 is a polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies b.v.b.a. | S-381-N1 is a carnauba and polyethylene micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is recommended for liquid inks. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies b.v.b.a. | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-400-N1 (EBS Wax) | Shamrock Technologies b.v.b.a. | S-400-N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is used in both the ink and coating industry. | |
| S-400-N5 (EBS Wax) | Shamrock Technologies b.v.b.a. | S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-Q (EBS Wax) | Shamrock Technologies b.v.b.a. | S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax) | Shamrock Technologies b.v.b.a. | S-400-SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| S-483 (Spherical Polyethylene Wax) | Shamrock Technologies b.v.b.a. | S-483 is a spherical Polyethylene wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. S-483 is recommended for liquid and paste inks. | |
| S-NAUBA-5021 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies b.v.b.a. | S-NAUBA-5021 is a carnauba and polyethylene wax blend showing melting peaks ranging from 84 – 110°C. S-NAUBA-5021 is recommended for paste inks in all aqueous and solvent based systems. | |
| SABIC TEA | Sabic Europe | SABIC TEA is a clear viscous hygroscopic liquid at room temperature with a mild ammonical odor. This product is used in cement/concrete, textile, oil field, electroplating, metal working, coatings, and mining applications. | |
| SABICOL L-2 | Sabic Europe | SABICOL L-2 is an adduct of naturally derived fatty alcohol C12-14 with two moles of Ethylene Oxide. It is a colorless and odorless liquid. It is efficient water in oil emulsifier and is readily biodegradable. SABICOL L-2 is mainly used as a raw material ...view more SABICOL L-2 is an adduct of naturally derived fatty alcohol C12-14 with two moles of Ethylene Oxide. It is a colorless and odorless liquid. It is efficient water in oil emulsifier and is readily biodegradable. SABICOL L-2 is mainly used as a raw material in the manufacturing of Lauryl Ether Sulphates for shampoos, shower gels, liquid soaps, dishwashing liquids, and liquid detergents. view less | |
| SABICOL L-3 | Sabic Europe | SABICOL L-3 is an adduct of naturally derived fatty alcohol C12-14 with three moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient water in oil emulsifier, and is readily biodegradable. This ...view more SABICOL L-3 is an adduct of naturally derived fatty alcohol C12-14 with three moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient water in oil emulsifier, and is readily biodegradable. This product is used in ether sulphates, homecare, detergents, cosmetics, crop protection, metalworking fluids, and paint/coating applications. view less | |
| SABICOL L-7 | Sabic Europe | SABICOL L-7 is a adduct of naturally derived fatty alcohol C12-14 with seven moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient oil in water emulsifier, and is readily biodegradable. This p...view more SABICOL L-7 is a adduct of naturally derived fatty alcohol C12-14 with seven moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is a colorless and odorless liquid, is efficient oil in water emulsifier, and is readily biodegradable. This product is used for homecare, textiles, leather, crop care, metalworking fluids, and paint/coating applications. view less | |
| SABICOL L-9 | Sabic Europe | SABICOL L-9 is a adduct of naturally derived fatty alcohol C12-14 with nine moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is an odorless white paste, is efficient oil in water emulsifier, and is readily biodegradable. This product is...view more SABICOL L-9 is a adduct of naturally derived fatty alcohol C12-14 with nine moles of Ethylene Oxide. It is a versatile non-ionic surfactant. It is an odorless white paste, is efficient oil in water emulsifier, and is readily biodegradable. This product is used in home care, paint/inks, industrial/institutional cleaning, crop protection, cosmetics/personal care, metalworking fluids, textiles, and leather applications. view less | |
| SAPEG 200 | Sabic Europe | SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average mole...view more SAPEG 200 is a non toxic, non irritant, colorless and odorless liquid. It is used as a humecatant, lubricant, solvent, and viscosity modifier in many applications. It consists of a distribution of polymers of varying molecular weights with an average molecular weight of 200. view less |
