| HEUCOPHOS® ZMP / HEUCORIN® RZ In 1-Part Polyurethane (Formulation #246-08) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZMP / HEUCORIN® RZ In 1-Part Polyurethane (Formulation #246-08) is a formulation for a water based 1-part polyurethane in combination with Heubach formulation No. 246-08. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In 1-Part Polyurethane (Formulation #246-09) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In 1-Part Polyurethane (Formulation #246-09) is a formulation for a water based 1-part polyurethane in combination with Heubach formulation No. 246-09. | |
| HEUCOPHOS® ZPA In Vinyl-Acrylic Dispersion (Formulation #01216) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPA In Vinyl-Acrylic Dispersion (Formulation #01216) is a formulation for a water based vinyl-acrylic dispersion in combination with Heubach formulation No. 01216. | |
| HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #D-1836) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Styrene-Acrylic (Formulation #D-1836) is a formulation for a water based styrene-acrylic in combination with Avecia formulation No. D-1836. | |
| HEUCOPHOS® ZPA In 1-Part Polyurethane (Formulation #SNM 90-33/1) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPA In 1-Part Polyurethane (Formulation #SNM 90-33/1) is a formulation for a water based 1-part polyurethane in combination with Bayer formulation No. SNM 90-33/1. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® FR in 1-Part Polyurethane (Formulation #379-04) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® FR in 1-Part Polyurethane (Formulation #379-04) is a formulation for a water based 1-part polyurethane in combination with Heubach formulation No. 379-04. | |
| HEUCOSIN® Special Anthracite Grey G 10120 | Heubach/Heucotech, Ltd. | HEUCOSIN® Special Anthracite Grey G 10120 is a dry coloured pigment preparation mix of inorganic/organic pigments and extenders. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. ...view more HEUCOSIN® Special Anthracite Grey G 10120 is a dry coloured pigment preparation mix of inorganic/organic pigments and extenders. It is specifically used for application in EP water-borne, EP solvent-free, polyurethane PU, and polymethylmethacrylate PMMA. This product is a grey powder that has a moisture content of 1.0% max., a specific gravity of 4.3 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 13 g/100g. view less | Request Sample |
| HEUCOPHOS® ZPO In Acrylic/Polyurethane Dispersion (Nyco Minerals Formulation) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Acrylic/Polyurethane Dispersion (Nyco Minerals Formulation) is a formulation for a water based acrylic/polyurethane dispersion in combination with Nyco Minerals formulation. | |
| HEUCOPHOS® ZPA In Acrylic/Polyurethane Dispersion (Nyco Minerals Formulation) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPA In Acrylic/Polyurethane Dispersion (Nyco Minerals Formulation) is a formulation for a water based acrylic/polyurethane dispersion in combination with Nyco Minerals formulation. | |
| HEUCOPHOS® ZPA In Vinyl-Acrylic Dispersion (Formulation #WB-6039) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPA In Vinyl-Acrylic Dispersion (Formulation #WB-6039) is a formulation for a water based styrene-acrylic dispersion in combination with Zeneca formulation No. D-1185. | |
| HEUCOPHOS® ZPO In Styrene-Acrylic dispersion (Formulation #D-1185) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Styrene-Acrylic dispersion (Formulation #D-1185) is a formulation for a water based styrene-acrylic dispersion in combination with Zeneca formulation No. D-1185. | |
| HEUCOPHOS® ZMP In Styrene-Butadiene Dispersion (Formulation #NOE 8091) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZMP In Styrene-Butadiene Dispersion (Formulation #NOE 8091) is a formulation for a water based styrene-butadiene dispersion in combination with Bayer formulation No. NOE 8091. | |
| HEUCOPHOS® ZCP-Plus In Styrene-Acrylic Dispersion (Formulation #319-03) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus In Styrene-Acrylic Dispersion (Formulation #319-03) is a formulation for a water based styrene-acrylic dispersion in combination with Heubach formulation No. 319-03. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #03252) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #03252) is a formulation for a water based styrene-acrylic dispersion in combination with Heubach formulation No. 03252. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic (Formulation #323-06) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic (Formulation #323-06) is a formulation for a water based styrene-acrylic in combination with Heubach formulation No. 323-06. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic (Formulation #339-06) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic (Formulation #339-06) is a formulation for a water based styrene-acrylic in combination with Heubach formulation No. 339-06. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ in Styrene-Acrylic (Formulation #413-04) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ in Styrene-Acrylic (Formulation #413-04) is a formulation for a water based styrene-acrylic in combination with Heubach formulation No. 413-04. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® FR in Styrene-Acrylic (Formulation #413-08) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® FR in Styrene-Acrylic (Formulation #413-08) is a formulation for a water based styrene-acrylic in combination with Heubach formulation No. 399-13. | |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...view more HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. view less | Request Sample |
| Deuteron MK-F6 | Deuteron | Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqu...view more Deuteron MK-F6 is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Hauthane L-2728 | Hauthaway | Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO mak...view more Hauthane L-2728 is an experimental, non-halogenated, aliphatic, water-borne polyurethane dispersion. It was developed for use on un-primed, un-treated flexible TPO. Coatings containing this polymer form tough, flexible films. Excellent adhesion to TPO makes it the ideal candidate for sheet goods used in upholstered furniture, canopies, signs and other fabricated articles. L-2728 may be formulated for spray or rotogravure applications. Viscosity modifications may be made with associative thickeners for knife-over-roll or similar methods. view less | |
| MIPA | LEHVOSS Group | MIPA is a basic chemical used in many applications serving as an emulsifier, stabilizer, chemical intermediate, and a neutralizer that achieves basicity, buffering, and alkalinity objectives. It has the lowest molecular weight of the three standard isopropanolamines. Major applications of this product include personal care, pharmaceuticals, metalworking products, and water borne coating...view more MIPA is a basic chemical used in many applications serving as an emulsifier, stabilizer, chemical intermediate, and a neutralizer that achieves basicity, buffering, and alkalinity objectives. It has the lowest molecular weight of the three standard isopropanolamines. Major applications of this product include personal care, pharmaceuticals, metalworking products, and water borne coatings. Use of MIPA is growing for titanium dioxide dispersion in paints, plastics, and paper. It is also used in algaecides/herbicides/fungicides/pesticides, paint strippers, personal care, polyurethane additives, reaction intermediates, surfactants, and urethanes. view less | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max. view less | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #270-09) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #270-09) is a formulation for a water based styrene-acrylic dispersion in combination with Heubach formulation No. 270-09. | |
| HEUCOPHOS® ZPO / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #A-2431-78) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #A-2431-78) is a formulation for a water based styrene-acrylic dispersion in combination with Eastman formulation No. A-2431-78. | |
| ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less | Request Sample |
| Hauthane HD-2602 | Hauthaway | Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silic...view more Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. HD-2602 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #319-04) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #319-04) is a formulation for a water based styrene-acrylic dispersion in combination with Heubach formulation No. 319-04. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #329-17) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ In Styrene-Acrylic Dispersion (Formulation #329-17) is a formulation for a water based styrene-acrylic dispersion in combination with Heubach formulation No. 329-17. | |
| HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ in Vinyl-Acrylic Dispersion (Formulation #390-11) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus / HEUCORIN® RZ in Vinyl-Acrylic Dispersion (Formulation #390-11) is a formulation for a water based vinyl-acrylic dispersion in combination with Heubach formulation No. 390-11. | |
| Deuteron MK-F | Deuteron | Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aque...view more Deuteron MK-F is suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HEUCOPHOS® ZPA In Styrene-Acrylic Dispersion (Formulation #S 1/62 B) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPA In Styrene-Acrylic Dispersion (Formulation #S 1/62 B) is a formulation for a water based styrene-acrylic dispersion in combination with Synthopol Chemie formulation No. S 1/62 B. | |
| Hauthane L-2942 | Hauthaway | Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-,...view more Hauthane L-2942 is an NMP-free, APEO-free, aliphatic, polyester-based, water-borne polyurethane dispersion. It was developed for use on flexible and rigid PVC, and treated polypropylene film. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films. Superior adhesion to PVC makes it the ideal candidate for vinyl sheet goods, automotive interior parts, vinyl furniture and components. L-2942 may be used as a sole vehicle or blended with acrylic emulsions. Viscosity modification can be made with associative thickeners for application via spray, knife-over-roll, or other methods. view less | |
| Rapid Dry Waterborne Epoxy Primer (Formulation #3515) | ICL Phosphate Specialty | Rapid Dry Waterbase Epoxy Primer with HALOX® SW-111 | |
| Nubirox 106 in Styrene-Acrylic Primer (Formulation #EAA 18723) | Ferro Pigments | This styrene-acrylic primer features Nubirox 106 & Nubirox FR-10. | |
| Nubirox 302 in Styrene-Acrylic Primer (Formulation #EAA 18724) | Ferro Pigments | This styrene-acrylic primer features Nubirox 302. | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc., Paints & Coatings Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less | |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active ...view more HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. view less | Request Sample |
| Anti-corrosion 2K epoxy clear coat, water-based (Formulation #L 00001.1) | Hoffmann Mineral | This formulation utilizes AKTISIL AM, SILLITIN Z 89, and SILFIT Z 91. | |
| Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...view more Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. view less | |
| Pergopak M3 | Deuteron | Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...view more Pergopak M3 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Pergopak M4 | Deuteron | Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers ...view more Pergopak M4 is a matting agent suitable as an exclusive matting agent for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. It can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes. The finer types of Deuteron MK matting agents are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased. Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. view less | Request Sample |
| Hauthane L-2857 | Hauthaway | Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugiti...view more Hauthane L-2857 is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-2857 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles. L-2857 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...view more K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. view less | |
| Capstone® FS-22 | LEHVOSS Group | Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured i...view more Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured into a coating, this product provides surface water and oil repellency and chemical resistance to the film. Used in a cleaning system, FS-22 boosts stain resistance through surface energy modification, and it provides foaming properties in non-polar systems. At very low use rates, it delivers advanced wetting and leveling power. view less | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...view more BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. view less | |
| Anti-corrosion 2K epoxy clearcoat, water-based, gray (Formulation #NC2260DB) | Hoffmann Mineral | This formulation utilizes AKTISIL AM. | |
| Anti-corrosion 2K epoxy clearcoat, water-based, gray (Formulation #NC2260DIN12944-6) | Hoffmann Mineral | This formulation utilizes AKTISIL AM. | |
| Anti-corrosion 2K epoxy monocoat, water-based, black (Formulation #OT 2265/01) | Hoffmann Mineral | This formulation utilizes SILLITIN Z 86. | |
| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...view more Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. view less | |
| ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less | Request Sample |
| Nubirox 106 in a Waterborne Styrene Acrylic System (Formulation #EAA 12672) | Ferro Pigments | Formulation EAA 12672 is an anticorrosive formulation based on a waterborne styrene acrylic system and Nubirox 106. | |
| Nubirox 301 in a Waterborne Styrene Acrylic System (Formulation #EAA 12674) | Ferro Pigments | Formulation EAA 12674 is an anticorrosive formulation based on a waterborne styrene acrylic system and Nubirox 301. | |
| Nubirox 106 in a Waterborne Alkyd System (Formulation #AA 13606) | Ferro Pigments | Formulation AA 13606 is an anticorrosive formulation based on a waterborne alkyd system and Nubirox 106. | |
| Nubirox 302 in a Waterborne Alkyd System (Formulation #AA 13610) | Ferro Pigments | Formulation AA 13610 is an anticorrosive formulation based on a waterborne alkyd system and Nubirox 302. | |
| Nubirox 106 in a Waterborne Pure Acrylic System (Formulation #AA 13265) | Ferro Pigments | Formulation AA 13265 is an anticorrosive formulation based on a waterborne pure acrylic system and Nubirox 106. | |
| Nubirox 302 in a Waterborne Pure Acrylic System (Formulation #AA 13269) | Ferro Pigments | Formulation AA 13269 is an anticorrosive formulation based on a waterborne pure acrylic system and Nubirox 302. | |
| Nubirox 106 in a Waterborne Epoxy System (Formulation #EPPAA 12463) | Ferro Pigments | Formulation EPPAA 12463 is an anticorrosive formulation based on a waterborne epoxy system and Nubirox 106. | |
| HEUCOPHOS® ZPO In Epoxy Emulsion (EMS-Chemie AG Formulation) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Epoxy Emulsion (EMS-Chemie AG Formulation) is a formulation for a solvent based epoxy emulsion in combination with EMS-Chemie AG formulation. | |
| HEUCOPHOS® SRPP In Epoxy Dispersion (Formulation #00188) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SRPP In Epoxy Dispersion (Formulation #00188) is a formulation for a solvent based epoxy dispersion in combination with Heubach formulation No. 00188. | |
| Nubirox 213 in WB 2K Epoxy Primer (Formulation #EPPAA 19031) | Ferro Pigments | This WB 2K Epoxy Primer features Nubifer Y-5028, Nubifer NB-5970, and Nubirox 213. | |
| NUBIROX 301 in WB Acrylic Paint (Formulation #AA 13962) | Ferro Pigments | This WB acrylic paint features Nubirox 301. | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...view more SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. view less | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...view more K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. view less | |
| CHROMA-CHEM® EDC-02397 Lamb Black ND | Chromaflo Technologies | CHROMA-CHEM® EDC-02397 Lamb Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 10...view more CHROMA-CHEM® EDC-02397 Lamb Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-10349 White ND | Chromaflo Technologies | CHROMA-CHEM® EDC-10349 White ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% so...view more CHROMA-CHEM® EDC-10349 White ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-20916 Black ND | Chromaflo Technologies | CHROMA-CHEM® EDC-20916 Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% so...view more CHROMA-CHEM® EDC-20916 Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-20948 LV Black ND | Chromaflo Technologies | CHROMA-CHEM® EDC-20948 LV Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100%...view more CHROMA-CHEM® EDC-20948 LV Black ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-30378 LV Blue ND | Chromaflo Technologies | CHROMA-CHEM® EDC-30378 LV Blue ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% ...view more CHROMA-CHEM® EDC-30378 LV Blue ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-40068 Raw Umber ND | Chromaflo Technologies | CHROMA-CHEM® EDC-40068 Raw Umber ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100...view more CHROMA-CHEM® EDC-40068 Raw Umber ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-40069 Burnt Umber ND | Chromaflo Technologies | CHROMA-CHEM® EDC-40069 Burnt Umber ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 1...view more CHROMA-CHEM® EDC-40069 Burnt Umber ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-50170 Green ND | Chromaflo Technologies | CHROMA-CHEM® EDC-50170 Green ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% so...view more CHROMA-CHEM® EDC-50170 Green ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-60166 Orange ND | Chromaflo Technologies | CHROMA-CHEM® EDC-60166 Orange ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% s...view more CHROMA-CHEM® EDC-60166 Orange ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-70536 Red Oxide ND | Chromaflo Technologies | CHROMA-CHEM® EDC-70536 Red Oxide ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100...view more CHROMA-CHEM® EDC-70536 Red Oxide ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-70544 Red ND | Chromaflo Technologies | CHROMA-CHEM® EDC-70544 Red ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% soli...view more CHROMA-CHEM® EDC-70544 Red ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-70561 LV Quindo Red ND | Chromaflo Technologies | CHROMA-CHEM® EDC-70561 LV Quindo Red ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a...view more CHROMA-CHEM® EDC-70561 LV Quindo Red ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-70650 Red 170 ND | Chromaflo Technologies | CHROMA-CHEM® EDC-70650 Red 170 ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% ...view more CHROMA-CHEM® EDC-70650 Red 170 ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-80448 Yellow Oxide ND | Chromaflo Technologies | CHROMA-CHEM® EDC-80448 Yellow Oxide ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a ...view more CHROMA-CHEM® EDC-80448 Yellow Oxide ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| CHROMA-CHEM® EDC-80482 Bismuth Yellow GS ND | Chromaflo Technologies | CHROMA-CHEM® EDC-80482 Bismuth Yellow GS ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled ...view more CHROMA-CHEM® EDC-80482 Bismuth Yellow GS ND belongs to the CHROMA-CHEM® EDC ND product line. These colorants are specifically designed for tinting solvent borne and 2 component epoxy systems. The colorants consist of organic and inorganic pigments milled in a 100% solids epoxy and are stabilized through a proprietary additive package to ensure excellent color control and stability. CHROMA-CHEM® EDC ND colorants meet all requirements for a high-performance epoxy coating system in terms of compatibility, pigment selection, gloss, gloss retention, hardness, adhesion, chemical, solvent and water resistance, as well as several other key performance factors. view less | Request Sample |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. Th...view more ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. The stabilisation is based on the oxygen binding properties of the antioxidant. ANTIGEL® KF-D improves flow and through-drying. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. view less | |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...view more Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. view less | Request Sample |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...view more ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. view less | |
| Heucophos® ZMP In 1-Part Polyurethane (Formulation #CI-112) | Heubach/Heucotech, Ltd. | ||
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| VANSIL® CK-20 | Vanderbilt Minerals, LLC | VANSIL® CK-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | |
| ACTIV-8® | Vanderbilt Minerals, LLC | ACTIV-8® is a drier accelerator used to improve dry times and catalyst stability in systems using cobalt or manganese driers. ACTIV-8 works as a drier accelerator in coatings that dry through an oxidative process, such as alkyd coatings. | |
| VANSIL® W-30 | Vanderbilt Minerals, LLC | VANSIL® W-30 is a grade of wollastonite (calcium metasilicate) that disperses to 4 Hegman fineness. This grade provides smooth paint films and is used as a general purpose extender in interior and exterior architectural coatings. |
