UL Prospector
Prospector

Success!

Successfully saved your search
491 Results
SCHUTZENGLIDE- 140 SCHÜTZEN Chemical Group SCHUTZENGLIDE- 140 is a gliding agent with excellent slip properties for use in paint and coating industry. It is designed for both water and solvent-born systems. Typical applications include industrial coatings, wood coatings, architectural paints and p...view more SCHUTZENGLIDE- 140 is a gliding agent with excellent slip properties for use in paint and coating industry. It is designed for both water and solvent-born systems. Typical applications include industrial coatings, wood coatings, architectural paints and printing inks. view less
nolax C35.3030 nolax AG (Vanora) nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, p...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less
ORGASOL® 2002 D NAT 1 Arkema ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less Request Sample
ORGASOL® 1002 ES5 NAT 1 Arkema ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less Request Sample
2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD BASF SE, Intermediates Division 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks.
ORGASOL® 1002 D NAT 1 Arkema ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less Request Sample
CERAFLOUR® 915 BYK CERAFLOUR® 915 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plasti...view more CERAFLOUR® 915 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic substrates to obtain textured surfaces. It also provides homogeneous and reproducible texture effects. view less
CERAFLOUR® 916 BYK CERAFLOUR® 916 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is a micronized modified HD polyethylene wax / polymer mixture. This product is suitable for all types of solvent-...view more CERAFLOUR® 916 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is a micronized modified HD polyethylene wax / polymer mixture. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic substrates to obtain textured surfaces. view less
Siltech® C-816 Siltech Corp. Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repel...view more Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repellence to such coatings, as well as mar resistance and improved slip. view less
UNIQFLOW 480 U UNIQCHEM (UK) CO., LTD. UNIQFLOW 480 U is an organically modified polysiloxane. This product is characterized by its leveling properties, substrate wetting, low foam, recoatability, and intercoat adhesion properties. It is used in water-borne coatings and solvent-borne industri...view more UNIQFLOW 480 U is an organically modified polysiloxane. This product is characterized by its leveling properties, substrate wetting, low foam, recoatability, and intercoat adhesion properties. It is used in water-borne coatings and solvent-borne industrial coatings. view less
CERAFAK 117 BYK CERAFAK 117 is a wax dispersion to improve the water repellency of solvent-borne coating systems.
CERAFLOUR® 913 BYK CERAFLOUR® 913 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic...view more CERAFLOUR® 913 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic substrates to obtain textured surfaces. It is distinguished by the following properties: homogeneous and reproducible surface structure effects, soft feel effect, very good matting. view less
DYNASYLAN® HYDROSIL 2926 Evonik Operations GmbH, BL Silanes Dynasylan® HYDROSIL 2926 is a water-borne inorganic binder for high temperature inorganic coatings.
Tivida® FL 2200 Merck Tivida® FL 2200 is a fluorosurfactant that provides surface wetting for water- and solvent-borne coatings.
Tivida® FL 2300 Merck Tivida® FL 2300 is a fluorosurfactant that provides surface wetting for water- and solvent-borne coatings.
Tivida® FL 2500 Merck Tivida® FL 2500 is a fluorosurfactant that provides surface wetting for water- and solvent-borne coatings.
Tivida® FL 2700 Merck Tivida® FL 2700 is a fluorosurfactant that provides surface wetting for water- and solvent-borne coatings.
UNIQFLOW 490 U UNIQCHEM (UK) CO., LTD. UNIQFLOW 490 U is an organically modified polyether polysiloxane with strong surface tension reduction. This product is characterized by scratch resistance and anti-static effects. It is used in wood and furniture coatings, water-borne and solvent-borne i...view more UNIQFLOW 490 U is an organically modified polyether polysiloxane with strong surface tension reduction. This product is characterized by scratch resistance and anti-static effects. It is used in wood and furniture coatings, water-borne and solvent-borne industrial coatings, automotive coatings, radiation-curing printing inks and overprint varnishes, and leather top coats. view less
CERAFLOUR® 914 BYK CERAFLOUR® 914 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is composed of micronized polypropylene waxes. This product provides homogeneous and reproducible texture effects.
Novares® W Rain Carbon Germany GmbH Novares® W is a special low viscous water miscible resin for water-borne formulations.
UNIQFLOW 498 U UNIQCHEM (UK) CO., LTD. UNIQFLOW 498 U is an organically modified polyether polysiloxane with strong reduction of surface tension. This product is characterized by scratch resistance, recoatability, and intercoat adhesion properties. It is used in wood and furniture coatings, wa...view more UNIQFLOW 498 U is an organically modified polyether polysiloxane with strong reduction of surface tension. This product is characterized by scratch resistance, recoatability, and intercoat adhesion properties. It is used in wood and furniture coatings, water-borne and solvent-borne industrial coatings, automotive coatings, radiation-curing printing inks and overprint varnishes, and leather top coats. view less
Dynoadd® F-601 Dynoadd by Dynea Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less Request Sample
Dynoadd® F-603 Dynoadd by Dynea Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, ...view more Dynoadd® F-603 is non-silicone, anionic additive for water-borne systems. Dynoadd® F-603 imparts improved substrate wetting, flow and levelling without the formation of foam. Dynoadd® F-603 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry. The effect of the additive on the stability of the resin should be controlled as part of the evaluation procedure. It may be used in all layers in multi-layered systems. view less Request Sample
UNIQFLOW 496 U UNIQCHEM (UK) CO., LTD. UNIQFLOW 496 U is an organically modified polyether polysiloxane with strong reduction of surface tension. This product is characterized by its substrate wetting, scratch resistance, recoatability, and intercoat adhesion properties. It is used in wood and furniture coatings, water-borne and solvent-borne industrial coatings, automotive coating...view more UNIQFLOW 496 U is an organically modified polyether polysiloxane with strong reduction of surface tension. This product is characterized by its substrate wetting, scratch resistance, recoatability, and intercoat adhesion properties. It is used in wood and furniture coatings, water-borne and solvent-borne industrial coatings, automotive coatings, radiation-curing printing inks and overprint varnishes, and leather top coats. view less
AQUACER® 526 BYK AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less
Siltech® C-42 Siltech Corp. Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. ...view more Siltech® C-42 is 100% active silicone polyether copolymer that is specifically designed to improve slip, leveling, mar resistance and gloss in water-borne, solvent-borne and UV coatings systems. It improves mar resistance and aids in dispersing pigments. It is also compatible in solvent-borne coating system, and with most of the resins used in the coatings industry including acrylic, alkyd, polyurethane, polyester and epoxy resins. This product is 100% active and is soluble in aliphatic and aromatic solvents. view less
PAT-ADD DA 788 Patcham LTD PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mi...view more PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mineral spirits with water. This results in reduction in VOC content, at lowest cost. Main benefits are: enabling paint cost reduction by water addition, enabling reduction in VOC level, and replacement of 20 to 35% of traditionally used white spirit in alkyd paint. view less
Steopac® Imerys Performance Additives Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily di...view more Steopac® is a fine high brightness talc/chlorite for prime pigment extension in decorative coatings. Provides optimal opacity, gloss adjustment, rheology control and barrier properties in water- and solvent-borne paints and lacquers. Fine grade, easily dispersible in water-borne systems reducing energy consumption and improving productivity. view less
WOCOSEN™ 45TK Janssen PMP WOCOSENTM 45TK is a technical concentrate that provides outstanding broad-spectrum protection against wooddestroying fungi, surface molds and blue stain. Based on the active ingredients propiconazole and IPBC, it is formulated for use in water-borne and s...view more WOCOSENTM 45TK is a technical concentrate that provides outstanding broad-spectrum protection against wooddestroying fungi, surface molds and blue stain. Based on the active ingredients propiconazole and IPBC, it is formulated for use in water-borne and solvent-borne wood preservatives, paints and coatings. view less
UNIQLIGHT 930 UNIQCHEM (UK) CO., LTD. UNIQLIGHT 930 is a UV absorber that comes in the form of a liquid and is characterized by its broad UV absorption, and high temperature and extraction resistance. This product is used in automotive coatings, industrial coatings, and water-borne coatings.
NOVARES® L 40 Rain Carbon Germany GmbH NOVARES® L 40 is a special liquid resin that is ideal for use in water-borne adhesives, flooring adhesives, sealants, jointing compounds, floor coatings, sealing compounds, and casting resins
DISPERBYK®-180 BYK DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings ...view more DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings to deflocculate and stabilize preferably inorganic pigments (especially titanium dioxide). DISPERBYK®-180 is solvent-free, reduces millbase viscosity and therefore is suitable for “low-VOC“ and “VOC-free“ systems. view less
BYK®-349 BYK BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...view more BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. view less
Dynoadd® D-962 Dynoadd by Dynea Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...view more Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less Request Sample
SCHWEGO® Foam 6303 Bernd Schwegmann GmbH & Co. KG SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...view more SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. view less
UNIQVIS 840 W UNIQCHEM (UK) CO., LTD. UNIQVIS 840 W is an additive characterized by its ability to reduce drying-out of aqueous pigment concentrates. This product is used in water-borne coating systems and inks.
BYK®-081 BYK BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly...view more BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly suitable for high solid alkyd systems in the architectural coatings sector. The additive shows good compatibility with clear coatings. BYK®-081 is not suitable for aqueous systems that contain little or no organic solvent as co-solvent. view less
CH-910 Yangzhou Chenhua New Material CO., LTD. CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating.
Celopro® HHB70S Celotech Chemical Co., Ltd. Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on.
Maxemul 7203 - Polymeric Surfactant (Anionic) Croda Coatings & Polymers Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7203 is a resin miscible surfactant. view less
N-Methylpyrrolidone, NMP BASF SE, Intermediates Division N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less
DISPERBYK®-182 BYK DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area a...view more DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area and is compatible with both solvent-borne and aqueous systems. DISPERBYK®-182 can be utilized - alone or in combination with DISPERBYK®-108 (see Data Sheet W217/PW3) - to produce solvent-borne pigment concentrates. view less
AFCONA - 5585 AFCONA Additives Sdn Bhd AFCONA – 5585 is a high molecular weight block copolymer with pigment affinity groups. This clear yellowish liquid functions as a solvent-free wetting and dispersing additive for solvent-borne and water based industrial coatings and architectural coatings...view more AFCONA – 5585 is a high molecular weight block copolymer with pigment affinity groups. This clear yellowish liquid functions as a solvent-free wetting and dispersing additive for solvent-borne and water based industrial coatings and architectural coatings. view less
BYK-315 N BYK BYK-315 N is a silicone-containing surface additive for solvent-borne coating systems, in particular automotive coatings. Slight reduction in the surface tension and slight increase in surface slip. No blushing after water immersion test.
CH-940 Yangzhou Chenhua New Material CO., LTD. CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating.
CH-920 Yangzhou Chenhua New Material CO., LTD. CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating.
MK-Fluo Red, VPA 596 mk chemicals MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
AQUACER® 1547 BYK AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance.
One Coat Water Base Acrylic Modified with Epoxy Ester (Formulation #XK-62/WE-237) ICL Phosphate Specialty One Coat Water-based Acrylic Modified with Epoxy Ester using HALOX® SZP-391
Maxemul 7201 - Polymeric Surfactant (Anionic) Croda Coatings & Polymers Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7201 is a versatile resin soluble surfactant. view less
UNIQLIGHT 992 UNIQCHEM (UK) CO., LTD. UNIQLIGHT 992 is a hinder amine light stabilizer that comes in the form of a liquid and is characterized by its compatibility with solvents, water-borne and UV systems as well as its ability to minimize paint defects. This product is used in OEM coatings,...view more UNIQLIGHT 992 is a hinder amine light stabilizer that comes in the form of a liquid and is characterized by its compatibility with solvents, water-borne and UV systems as well as its ability to minimize paint defects. This product is used in OEM coatings, industrial coatings, wood coatings, and UV coatings. view less
Dynasylan® HYDROSIL 2627 Evonik Operations GmbH, BL Silanes Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved.
Dynasylan® HYDROSIL 2909 Evonik Operations GmbH, BL Silanes Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved.
AMP® ANGUS Chemical Company AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less
MK-Fluo Green, VPA 596/1 mk chemicals MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
MK Fluo Yellow, VPA 596/3 mk chemicals MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
MK-Fluo Pink, VPA 596/4 mk chemicals MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
MK-Fluo Orange, VPA 596/5 mk chemicals MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
MK Fluo Blue, VPA 596/7 mk chemicals MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings.
Capstone® FS-83 LEHVOSS Group Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne c...view more Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne coating defects, such as fisheyes, craters, pinholes, and orange peel. When cured into a coating, it provides water and oil repellency, as well as chemical resistance, to the film. view less
WorléeAdd 458 Worlée-Chemie G.m.b.H. WorléeAdd 458 is a nitrit-free flash rust inhibitor for water-borne coatings, especially for those based on latexes. W´Add 458 is forming a film on top of an "anodic" action, which prevents the appearance of rust discoloration, well-known as "flash rust" ...view more WorléeAdd 458 is a nitrit-free flash rust inhibitor for water-borne coatings, especially for those based on latexes. W´Add 458 is forming a film on top of an "anodic" action, which prevents the appearance of rust discoloration, well-known as "flash rust" during the paint application. This product can be used in emulsion paints as well as in water-borne anticorrosion paints e.g. based on W´Cryl 7158. view less
Maxemul 7102 - Polymeric Surfactant (Non-Ionic) Croda Coatings & Polymers Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7102 is suitable for medium and short oil alkyd emulsions. view less
4HBA Kowa Europe GmbH 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...view more 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. view less Request Sample
Maxemul 7101 - Polymeric Surfactant (Non-Ionic) Croda Coatings & Polymers Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7101 is suitable for long and medium oil alkyd emulsions. view less
HYDRO PLIOLITE™ 211 Synthomer HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...view more HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. view less
ESACOTE PU 77 LEHVOSS Group ESACOTE PU 77 is a solvent free water-borne dispersion of an aliphatic polyurethane based on polycarbonate diols, which gives hard and transparent coatings with excellent water resistance, gloss retention, and resistance to yellowing. In combination with ...view more ESACOTE PU 77 is a solvent free water-borne dispersion of an aliphatic polyurethane based on polycarbonate diols, which gives hard and transparent coatings with excellent water resistance, gloss retention, and resistance to yellowing. In combination with water dispersible polyisocyanates, ESACOTE PU 77 gives high quality coatings for the wood industry and the parquet flooring. view less
UNIQLIGHT 923 UNIQCHEM (UK) CO., LTD. UNIQLIGHT 923 is a hinder amine light stabilizer that comes in the form of a liquid. This product is characterized by its compatibility with solvents, water-borne and UV systems as well as OEM and higher requirement systems and acid catalyzed systems. It ...view more UNIQLIGHT 923 is a hinder amine light stabilizer that comes in the form of a liquid. This product is characterized by its compatibility with solvents, water-borne and UV systems as well as OEM and higher requirement systems and acid catalyzed systems. It is used in OEM coatings, industrial coatings, and UV coatings. view less
PLIOTEC™ 115 Synthomer PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for...view more PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for PU foams. view less
APACA PCI Group, Inc. APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...view more APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. view less
Kemox RC 808 The Kerala Minerals & Metals Ltd Kemox RC 808 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.3. It is most commonly used in coil coating, emulsion paint systems powder coating, water borne coating, and p...view more Kemox RC 808 is a rutile titanium dioxide pigment produced by the chloride process. This product has a specific gravity of 4 and a pH value of 7.3. It is most commonly used in coil coating, emulsion paint systems powder coating, water borne coating, and printing ink applications. view less
2-Mercaptoethanol BASF SE, Intermediates Division 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings.
Pangel M150 Tolsa SA Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...view more Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. view less
Siltech® C-608 Siltech Corp. Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary f...view more Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. view less
NPG, Neol® Neopentylglycol BASF SE, Intermediates Division NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for p...view more NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV resistance. Polyesters show good hardness and excellent weather resistance. view less
DAPRO® UW 461 Elementis DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. Request Sample
ESACOTE PU 78/N LEHVOSS Group ESACOTE PU 78/N is a milky liquid, water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates. If required, it is possible to enhance the adhesion and the chemical resistance by simpl...view more ESACOTE PU 78/N is a milky liquid, water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates. If required, it is possible to enhance the adhesion and the chemical resistance by simply adding polyaziridine or water dispersible polyisocyanates. view less
Dynoadd® D-963 Dynoadd by Dynea Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...view more Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less Request Sample
Polyslip™ FA 06 E Lawter Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solve...view more Polyslip™ FA 06 E is a solvent-based wax dispersion that functions as an additive in water and solvent-based inks, overprint varnishes and coatings where scratch, rub and block resistance are required as is improved slip. It also has applications in solvent borne and aqueous inks and coatings. view less
N-Ethylpyrrolidone, NEP BASF SE, Intermediates Division N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less
BLISTER FREE 45 Bernd Schwegmann GmbH & Co. KG BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...view more BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. view less
UCECOAT® 7520 Allnex UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCEC...view more UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. view less Request Sample
UNIQFLOW 372 S UNIQCHEM (UK) CO., LTD. UNIQFLOW 372 S is a fluorocarbon modified polyacrylate leveling agent. This product is characterized by its substrate wetting, intercoat adhesion, and heat stability properties. It is used in baking enamels, polyurethane coatings, water-borne coatings, ra...view more UNIQFLOW 372 S is a fluorocarbon modified polyacrylate leveling agent. This product is characterized by its substrate wetting, intercoat adhesion, and heat stability properties. It is used in baking enamels, polyurethane coatings, water-borne coatings, radiation curable coating systems as well as in radiation curable inks, flexographic, screen, and gravure ink applications. view less
ESACOTE PU 78 LEHVOSS Group ESACOTE PU 78 is an opalescent liquid water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates as for the automotive interior application. If required, it is possible to enhance the...view more ESACOTE PU 78 is an opalescent liquid water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates as for the automotive interior application. If required, it is possible to enhance the adhesion and the chemical resistance by simply adding polyaziridine or water dispersible polyisocyanates. view less
SILRES® MP 50 E Wacker Chemie AG SILRES® MP 50 E is a methyl phenyl group containing silicone resin emulsion. In combination with suitable temperature stable pigments, fillers and additional organic binders, SILRES® MP 50 E is the optimum binder for heat resistant water-borne paints. It ...view more SILRES® MP 50 E is a methyl phenyl group containing silicone resin emulsion. In combination with suitable temperature stable pigments, fillers and additional organic binders, SILRES® MP 50 E is the optimum binder for heat resistant water-borne paints. It can be used in coatings for cookware, metal coatings and heat-resistant coatings. view less
XIAMETER® AFE-2210 Antifoam Emulsion Dow Performance Silicones Paints, Inks and Coatings XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product i...view more XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product is suitable for use in high gloss, semi-gloss and flat latex (emulsion) paints. view less
BW300 Tianyi Chemical Engineering Material Co., Ltd. BW300, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0.
BW330 Tianyi Chemical Engineering Material Co., Ltd. BW330, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0.
UNIQSPERSE 690 W UNIQCHEM (UK) CO., LTD. UNIQSPERSE 690 W is a high molecule weight block dispersant. This product is characterized by its effect on viscosity reduction, hiding power, and flood and float prevention. It is used in water-borne applications, inorganic and organic pigments, coatings...view more UNIQSPERSE 690 W is a high molecule weight block dispersant. This product is characterized by its effect on viscosity reduction, hiding power, and flood and float prevention. It is used in water-borne applications, inorganic and organic pigments, coatings, and printing inks. view less
DOWSIL™ 88 Additive Dow Performance Silicones Paints, Inks and Coatings DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less
Kamin® 2000C KaMin Solutions Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 ex...view more Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 extension, tint strength, and brightness (whiteness). Its typical uses include inks and flat architectural coatings. view less Request Sample
Kamin® 70C KaMin Solutions Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub ...view more Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub resistance and sheen control. It is the workhorse of the industry with typical uses in flat and low sheen architectural coatings. view less Request Sample
CYMEL® 1156 Allnex CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...view more CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. view less Request Sample
Dynoadd® P-506 Dynoadd by Dynea Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
Dynoadd® P-510 Dynoadd by Dynea Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
Dynoadd® P-515 Dynoadd by Dynea Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
Dynoadd® P-520 Dynoadd by Dynea Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
Dynoadd® P-530 Dynoadd by Dynea Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
Dynoadd® P-540 Dynoadd by Dynea Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coating...view more Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. view less Request Sample
DISPERBYK®-184 BYK DISPERBYK®-184 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is primarily for aqueous s...view more DISPERBYK®-184 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is primarily for aqueous systems. It is preferably used to stabilize organic pigments. For inorganic pigments, DISPERBYK®-180 should be used. view less
RHEOLATE® 420 Elementis RHEOLATE® 420 is an economical and versatile alkali swellable thickener in an easy to use emulsion form designed to fully or partially replace cellulosic thickeners in a variety of water-borne systems. Request Sample