| 15% POTASSIUM HEX-CEM | OMG Borchers GmbH | 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...view more 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. view less | |
| 21% COBALT HYDROXY TEN-CEM | OMG Borchers GmbH | 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...view more 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. view less | |
| Acid Black 10BX | Camex Limited | Acid Black 10BX is an acid dyestuff. This product's generic name is Acid Black 1. It can be used to dye nylon. | |
| Acid Black AB | Camex Limited | Acid Black AB is an acid dyestuff. This product's generic name is Acid Black 210. It can be used to dye nylon. | |
| Acid Black LDN | Camex Limited | Acid Black LDN is an acid dyestuff. This product's generic name is Acid Black 172. It can be used to dye nylon. | |
| Acid Black MSRL | Camex Limited | Acid Black MSRL is an acid dyestuff. This product's generic name is Acid Black 194. It can be used to dye nylon. | |
| Acid Black NBR | Camex Limited | Acid Black NBR is an acid dyestuff. This product's generic name is Acid Black 234. It can be used to dye nylon. | |
| Acid Black WA | Camex Limited | Acid Black WA is an acid dyestuff. This product's generic name is Acid Black 52. It can be used to dye nylon. | |
| Acid Brillient Commase Fast Blue 2R | Camex Limited | Acid Brillient Commase Fast Blue 2R is an acid dyestuff. This product's generic name is Acid Blue 92. It can be used to dye nylon. | |
| Acid Brown ER | Camex Limited | Acid Brown ER is an acid dyestuff. This product's generic name is Acid Brown 75. It can be used to dye nylon. | |
| Acid Brown GB | Camex Limited | Acid Brown GB is an acid dyestuff. This product's generic name is Acid Brown 161. It can be used to dye nylon. | |
| Acid Brown NT | Camex Limited | Acid Brown NT is an acid dyestuff. This product's generic name is Acid Brown 165. It can be used to dye nylon. | |
| Acid Dark Blue MTR | Camex Limited | Acid Dark Blue MTR is an acid dyestuff. This product's generic name is Acid Blue 193. It can be used to dye nylon. | |
| Acid Fast Brown ESR | Camex Limited | Acid Fast Brown ESR is an acid dyestuff. This product's generic name is Acid Brown 348. It can be used to dye nylon. | |
| Acid Fast Navy Blue S5R/2RNS | Camex Limited | Acid Fast Navy Blue S5R/2RNS is an acid dyestuff. This product's generic name is Acid Blue 113. It can be used to dye nylon. | |
| Acid Green V | Camex Limited | Acid Green V is an acid dyestuff. This product's generic name is Acid Green 16. It can be used to dye nylon. | |
| Acid Light Fast Yellow G | Camex Limited | Acid Light Fast Yellow G is an acid dyestuff. This product's generic name is Acid Yellow 11. It can be used to dye nylon. | |
| Acid Maroon V | Camex Limited | Acid Maroon V is an acid dyestuff. This product's generic name is Acid Red 119. It can be used to dye nylon. | |
| Acid Orange Brown BT | Camex Limited | Acid Orange Brown BT is an acid dyestuff. This product's generic name is Acid Brown 106. It can be used to dye nylon. | |
| Acid Orange II | Camex Limited | Acid Orange II is an acid dyestuff. This product's generic name is Acid Orange 7. It can be used to dye nylon. | |
| Acid Red 3BN | Camex Limited | Acid Red 3BN is an acid dyestuff. This product's generic name is Acid Red 131. It can be used to dye nylon. | |
| Acid Scarlet G | Camex Limited | Acid Scarlet G is an acid dyestuff. This product's generic name is Acid Red 97. It can be used to dye nylon. | |
| Acid Yellow 5GN | Camex Limited | Acid Yellow 5GN is an acid dyestuff. This product's generic name is Acid Yellow 110. It can be used to dye nylon. | |
| Acid Yellow MR | Camex Limited | Acid Yellow MR is an acid dyestuff. This product's generic name is Acid Yellow-42. It can be used to dye nylon. | |
| Additive OF | OMG Borchers GmbH | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | OMG Borchers GmbH | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| Ascinin® Anti Skin 0444 | OMG Borchers GmbH | Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special...view more Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided. Ascinin® Anti Skin 0444 contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is suitable for all solventborne and solvent-free oxidatively drying coatings. It might be used in clear-coats as well as in pigmented systems. This product is solved in a non-VOC solvent, so it contains a very low VOC portion and is of low odour. Hence it is especially recommendable for VOC-reduced coatings, High-Solids-paints, printing inks and for use in environmentally friendly coatings. view less | |
| Ascinin® Anti Skin 0445 | OMG Borchers GmbH | Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and...view more Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is a clear, low viscous, colorless to yellowish liquid. This product is solved in a high flashpoint alcoholic solvent. It is suitable for common solventborne coatings as well as for polar and waterborne formulations. Ascinin® Anti Skin 0445 might be used in clearcoats as well as in pigmented systems. view less | |
| Ascinin® P | OMG Borchers GmbH | Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting duri...view more Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting during over-coating. In baking paints, it eliminates surface defects. This product's active substance is not very volatile, so it counteracts wrinkling even in baking paints based, for examply, on ricin alkyds. view less | |
| Ascinin® Special | OMG Borchers GmbH | Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good bind...view more Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good binder compatibility. view less | |
| Bayoxide® Z active | OMG Borchers GmbH | Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for ...view more Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for coatings based on binders which are compatible with zinc oxide. view less | |
| Black B | Camex Limited | Black B is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black BG H/Cons. | Camex Limited | Black BG H/Cons. is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black C 150 | Camex Limited | Black C 150 is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black CAPV | Camex Limited | Black CAPV is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Black CFC | Camex Limited | Black CFC is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black CNF | Camex Limited | Black CNF is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Black CNN | Camex Limited | Black CNN is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HEBL | Camex Limited | Black HEBL is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and...view more Black HEBL is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and garments. view less | |
| Black HFGR | Camex Limited | Black HFGR is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HFRD | Camex Limited | Black HFRD is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HGR | Camex Limited | Black HGR is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Black HN | Camex Limited | Black HN is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Black RL | Camex Limited | Black RL is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue 3R | Camex Limited | Blue 3R is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue 5RH | Camex Limited | Blue 5RH is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Blue BB | Camex Limited | Blue BB is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue BRF | Camex Limited | Blue BRF is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue CAFG | Camex Limited | Blue CAFG is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Blue CAFR | Camex Limited | Blue CAFR is a pigment emulsion. This product is a dispersed organic pigment. It can be used for printing applications on cotton, viscose, nylon, polyester, fabrics, and their blends. | |
| Blue H2GP | Camex Limited | Blue H2GP is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue HERD | Camex Limited | Blue HERD is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and ...view more Blue HERD is a bis monochlorotriazine reactive dye with low reactivity and higher substantivity. This product is characterized by high exhaustion and fixation values. It can be used in printing and coatings, especially in yarns, fiber, piece dyeing and garments. view less | |
| Blue HGR | Camex Limited | Blue HGR is a monochlorotriazine reactive dye. Because this product has a single chlorine group, it has low reactivity. It therefore requires severe conditions of fixation with cotton fabric. It can be used on cotton fabric for printing and coatings. | |
| Blue M2R | Camex Limited | Blue M2R is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue M4GD | Camex Limited | Blue M4GD is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue ME2RL | Camex Limited | Blue ME2RL is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Blue MGN | Camex Limited | Blue MGN is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MR | Camex Limited | Blue MR is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MX2G | Camex Limited | Blue MX2G is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue MX7R | Camex Limited | Blue MX7R is a dichloro-triazine reactive dye. This product is highly reactive and therefore does not require strong conditioning for fixation with cellulose materials. It can be used in printing and coatings. | |
| Blue R | Camex Limited | Blue R is a dye based on a vinyl sulphone group, which makes this product readily soluble in warm water. It can be used in dyeing and printing, especially in discharge printing. | |
| Blue RR | Camex Limited | Blue RR is a bi-functional reactive dye. This product works well on cottons, viscose, and their blends, because of their consistency and dependability. It can be used in printing and coatings. | |
| Borchers® AF 0670 | OMG Borchers GmbH | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during produ...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| Borchers® AF 0871 | OMG Borchers GmbH | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Borchers® AF 1171 | OMG Borchers GmbH | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| Borchers® AF 1270 | OMG Borchers GmbH | Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam ...view more Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam control agent with air release property. It can be used in clear and pigmented solvent based systems. view less | |
| Borchers® AF T | OMG Borchers GmbH | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| Borchers® Deca Barium 12.5 | OMG Borchers GmbH | Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extend...view more Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extenders in solvent based coatings systems. It improves gloss and prevents adsorption of the primary driers by pigments and extenders thereby increasing coating stability during prolonged storage. In combination with Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese, barium has a similar effect to that of lead and will promote through drying in many formulations. Borchers® Deca Barium 12.5 is used in solventborne systems based on alkyds and epoxy esters that crosslink by oxidation. view less | |
| Borchers® Deca Cobalt 10 | OMG Borchers GmbH | Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems,...view more Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems, whether air-or forced-drying. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. Borchers® Deca Cobalt 10 thus results in rapid surface drying. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 | OMG Borchers GmbH | Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt cat...view more Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 (xylene) | OMG Borchers GmbH | Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. ...view more Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Cobalt 6 HS | OMG Borchers GmbH | Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borch...view more Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combin...view more Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in com...view more Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Zirconium 15 | OMG Borchers GmbH | Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for ...view more Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in solventborne systems. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Deca Zirconium 15 HS | OMG Borchers GmbH | Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended f...view more Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in VOC-reduced and High-Solid coatings. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Dry 0133 | OMG Borchers GmbH | Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerat...view more Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0246 | OMG Borchers GmbH | Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator...view more Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0347 Aqua | OMG Borchers GmbH | Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems eit...view more Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems either in clear coats or in pigmented systems. This product aqua can replace other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0410 | OMG Borchers GmbH | Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either ...view more Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clearcoats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0411 HS | OMG Borchers GmbH | Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an orga...view more Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clear coats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0614 Aqua | OMG Borchers GmbH | Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other...view more Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® Dry 0615 Aqua | OMG Borchers GmbH | Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may repla...view more Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® LH 10 | OMG Borchers GmbH | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...view more Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. view less | |
| Borchers® VP 0132 | OMG Borchers GmbH | Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary ...view more Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary driers, especially cobalt siccatives. This product provides both rapid surface dry and also good through-drying properties. view less | |
| Borchers® VP 9950 | OMG Borchers GmbH | Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especial...view more Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especially for cobalt siccatives. This product provides fast drying of the film surface of water based coating systems. view less | |
| Borchi® Coll 10 | OMG Borchers GmbH | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | OMG Borchers GmbH | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | OMG Borchers GmbH | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | OMG Borchers GmbH | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| Borchi® Gel 0434 | OMG Borchers GmbH | Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optima...view more Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optimal viscosity in all waterborne coatings for application by brush or roller, especially under higher-shear conditions (> 1000 s-1). It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0435 | OMG Borchers GmbH | Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. B...view more Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. Borchi® Gel 0435 is characterized by its extraordinary efficacy in most coating systems under high-shear conditions, which makes the product particularly well suited for setting the optimal viscosity in all waterborne coatings for application by roller or brush. It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0620 | OMG Borchers GmbH | Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with bind...view more Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with binder particles and pigments a pronounced shear-thinning flow behavior. This product is suitable as thickening agent for all waterborne systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0621 | OMG Borchers GmbH | Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other compon...view more Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other components of the system a shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0625 | OMG Borchers GmbH | Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity...view more Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity stability mainly in the range between 1000 s-1 - 10000 s-1. This product is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel 0626 | OMG Borchers GmbH | Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high...view more Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high-shear range (1000 - 10000 s-1). It is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel ALA | OMG Borchers GmbH | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| Borchi® Gel D8 | OMG Borchers GmbH | Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance ...view more Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance and promotes corrosion resistance. It is suited for use as a thickener for solvent-based and solvent-free binders. view less | |
| Borchi® Gel L 75 N | OMG Borchers GmbH | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| Borchi® Gel L 76 | OMG Borchers GmbH | Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also ...view more Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also stabilises aqueous pigmented paints. view less |
