| 15% POTASSIUM HEX-CEM | OMG Borchers GmbH | 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...view more 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. view less | |
| 21% COBALT HYDROXY TEN-CEM | OMG Borchers GmbH | 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...view more 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. view less | |
| Additive OF | OMG Borchers GmbH | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | OMG Borchers GmbH | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| ANTI-TERRA®-203 | BYK | ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging te...view more ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixot...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| ANTI-TERRA®-205 | BYK | ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides. | |
| ANTI-TERRA®-250 | BYK | ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the ...view more ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction. view less | |
| ANTI-TERRA®-U | BYK | ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of uns...view more ANTI-TERRA-U is the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be utilized to provide excellent gelling in organo-philic bentonites. This product is composed of a solution of a salt of unsaturated polyamine amides and lower molecular weight acidic polyesters. view less | |
| ANTI-TERRA®-U 100 | BYK | ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERR...view more ANTI-TERRA-U 100 is the solvent-free version of ANTI-TERRA U , the standard wetting and dispersing additive for solvent-borne industrial and architectural coatings. It can also be used to provide excellent gelation of organophilic bentonites. ANTI-TERRA-U 100 is effective for wetting and dispersing colored pigments, both organic and inorganic. No adverse effect has been observed on the pot-life of two-component systems or on the dry time of oxidative cure binders. ANTI-TERRA-U 100 can also be used as a wetting and suspending additive in water soluble coatings. view less | |
| AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | |
| AQUACER 1031 | BYK | AQUACER 1031 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous care products. It offers an anti-slip effect and good foot traffic resistance. | |
| AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | |
| AQUACER 1063 | BYK | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| AQUACER 1075 | BYK | AQUACER 1075 is an emulsion based on an HD polyethylene wax to improve the surface properties of aqueous care products and polishes, and aqueous printing inks. | |
| AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | |
| AQUACER® 1547 | BYK | AQUACER® 1547 is a wax emulsion for improving surface properties of water-borne can coatings. It is an anionic emulsion of an oxidized HD polyethylene wax. This product improves scratch resistance. | |
| AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | |
| AQUACER 2650 | BYK | AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the s...view more AQUACER 2650 is a wax emulsion based on carnauba wax for aqueous thermal transfer systems, car care products and aqueous leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | |
| AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | |
| AQUACER 506 | BYK | AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 506 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 506 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 506 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER 519 | BYK | AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties ...view more AQUACER 519 is an emulsion based on a HD polyethylene wax for improving the surface properties of aqueous care products and polishes. It improves the buffability, increases filling capacity and produces an anti-slip effect. The above-mentioned properties are generated by mixing AQUACER 519 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt-repellent action. AQUACER 519 is compatible with all known polymer dispersions and plasticizers. view less | |
| AQUACER® 526 | BYK | AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less | |
| AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | |
| AQUACER 528 | BYK | AQUACER 528 is an emulsion based on an ethylene-acrylic acid-copolymer wax for improving the surface properties of aqueous care products. It offers strong anti-slip effect and good foot traffic resistance. | |
| AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | |
| AQUACER® 533 | BYK | AQUACER® 533 is a wax emulsion on the basis of modified paraffin for aqueous systems to improve surface slip, anti-blocking, and water-resistance. It is typically used in architectural coatings and in the printing inks industry. | |
| AQUACER® 537 | BYK | AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking...view more AQUACER® 537 is an anionic emulsion based on a modified paraffin wax. It is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. This product improves the following surface properties: water repellency, anti blocking and slip. view less | |
| AQUACER® 539 | BYK | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | |
| AQUACER 565 | BYK | AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the ...view more AQUACER 565 is an aqueous carnauba wax emulsion for improving the surface characteristics of care products, polishes, and leather coatings. It seals and thereby covers any minor scratches on the surface that is to be treated and restores the color of the surface. The melting point of 85 °C means that the wax emulsion can easily be polished up using a soft terry cloth or microfiber cloth, but polishing with mechanical tools is also possible. view less | |
| AQUACER 570 | BYK | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...view more AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. view less | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | |
| AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | |
| AQUACER 583 | BYK | AQUACER 583 is a wax emulsion used to improve the surface characteristics of seed coatings. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| AQUACER 595 | BYK | AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack...view more AQUACER 595 is an emulsion based on a modified polypropylene wax for improving the surface properties of aqueous care products. It offers a strong anti-slip effect and good dirt repulsion. In aqueous leather finishes it produces an anti-slip and anti-tack effect. view less | |
| AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | |
| AQUACER® 840 | BYK | AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less | |
| AQUAMAT® 208 | BYK | AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scrat...view more AQUAMAT® 208 is an oxidized HD polyethylene wax dispersion. It is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance and soft feel effect. view less | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| AQUATIX® 8421 | BYK | AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: impr...view more AQUATIX® 8421 is a non-ionic emulsion of a modified Ethylene-Vinyl-Acetate (EVA) copolymer wax. It improves the rheological properties and brilliance of effect pigment slurries that are co-solvent-free. This product provides the following properties: improves effect pigment orientation, reduces cloudiness /mottling, shows less sensivity to co-solvents in coating systems compared to PU based thickeners, is “ready to use”, provides easy handling and incorporation compared to clays or acrylic thickeners, and excellent anti-settling properties in coatings during storage and application. view less | |
| Ascinin® Anti Skin 0444 | OMG Borchers GmbH | Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special...view more Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided. Ascinin® Anti Skin 0444 contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is suitable for all solventborne and solvent-free oxidatively drying coatings. It might be used in clear-coats as well as in pigmented systems. This product is solved in a non-VOC solvent, so it contains a very low VOC portion and is of low odour. Hence it is especially recommendable for VOC-reduced coatings, High-Solids-paints, printing inks and for use in environmentally friendly coatings. view less | |
| Ascinin® Anti Skin 0445 | OMG Borchers GmbH | Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and...view more Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is a clear, low viscous, colorless to yellowish liquid. This product is solved in a high flashpoint alcoholic solvent. It is suitable for common solventborne coatings as well as for polar and waterborne formulations. Ascinin® Anti Skin 0445 might be used in clearcoats as well as in pigmented systems. view less | |
| Ascinin® P | OMG Borchers GmbH | Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting duri...view more Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting during over-coating. In baking paints, it eliminates surface defects. This product's active substance is not very volatile, so it counteracts wrinkling even in baking paints based, for examply, on ricin alkyds. view less | |
| Ascinin® Special | OMG Borchers GmbH | Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good bind...view more Ascinin® Special is a mixture of a substituted phenol and a volatile oxime in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented paints based on drying oils or alkyd resins. This product is easy to use and exhibits good binder compatibility. view less | |
| Bayoxide® Z active | OMG Borchers GmbH | Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for ...view more Bayoxide® Z active is a zinc oxide that is obtained by precipitation. It is highly dispersed and extremely reactive. Because of its microscopic structure, this substance is an interesting additive for the coatings sector. It is used as a raw material for coatings based on binders which are compatible with zinc oxide. view less | |
| BENTOLITE-L 10 | BYK | BENTOLITE-L 10 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories. | |
| BENTOLITE-L 3 | BYK | BENTOLITE-L 3 is a low iron rheology additive based on natural bentonite for aqueous plastic refractories. | |
| Borchers® AF 0670 | OMG Borchers GmbH | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during produ...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| Borchers® AF 0871 | OMG Borchers GmbH | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Borchers® AF 1171 | OMG Borchers GmbH | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| Borchers® AF 1270 | OMG Borchers GmbH | Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam ...view more Borchers® AF 1270 is a solution of fluorinated, organo-modified polysiloxanes as active ingredients, which are highly efficient and compatible defoamer/air release agents with anti-cratering properties. This product is a highly active silicone based foam control agent with air release property. It can be used in clear and pigmented solvent based systems. view less | |
| Borchers® AF T | OMG Borchers GmbH | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| Borchers® Deca Barium 12.5 | OMG Borchers GmbH | Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extend...view more Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extenders in solvent based coatings systems. It improves gloss and prevents adsorption of the primary driers by pigments and extenders thereby increasing coating stability during prolonged storage. In combination with Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese, barium has a similar effect to that of lead and will promote through drying in many formulations. Borchers® Deca Barium 12.5 is used in solventborne systems based on alkyds and epoxy esters that crosslink by oxidation. view less | |
| Borchers® Deca Cobalt 10 | OMG Borchers GmbH | Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems,...view more Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems, whether air-or forced-drying. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. Borchers® Deca Cobalt 10 thus results in rapid surface drying. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 | OMG Borchers GmbH | Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt cat...view more Borchers® Deca Cobalt 12 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. It is used in solventborne systems. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. view less | |
| Borchers® Deca Cobalt 12 (xylene) | OMG Borchers GmbH | Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. ...view more Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Cobalt 6 HS | OMG Borchers GmbH | Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borch...view more Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. view less | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combin...view more Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in com...view more Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Zirconium 15 | OMG Borchers GmbH | Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for ...view more Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in solventborne systems. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Deca Zirconium 15 HS | OMG Borchers GmbH | Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended f...view more Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in VOC-reduced and High-Solid coatings. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. view less | |
| Borchers® Dry 0133 | OMG Borchers GmbH | Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerat...view more Borchers® Dry 0133 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0246 | OMG Borchers GmbH | Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator...view more Borchers® Dry 0246 is a cobalt-free drier based on a highly active synergistic drier composition for all solventborne oxidatively drying coating systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used either in clearcoats or pigmented coating systems. Here it replaces other primary driers, especially cobalt siccatives. It provides rapid surface dry and improves through-drying and hardness of the applied film. view less | |
| Borchers® Dry 0347 Aqua | OMG Borchers GmbH | Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems eit...view more Borchers® Dry 0347 Aqua is a cobalt-free combination drier based on a highly active synergistic drier association with an organic drying accelerator. It can be used without adding other siccatives or all waterborne oxidatively drying coating systems either in clear coats or in pigmented systems. This product aqua can replace other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0410 | OMG Borchers GmbH | Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either ...view more Borchers® Dry 0410 is a new cobalt-free primary drier for all conventional oxidatively drying paints. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clearcoats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0411 HS | OMG Borchers GmbH | Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an orga...view more Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clear coats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® Dry 0614 Aqua | OMG Borchers GmbH | Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other...view more Borchers® Dry 0614 aqua is a highly reactive cobalt-free primary drier for waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® Dry 0615 Aqua | OMG Borchers GmbH | Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may repla...view more Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. view less | |
| Borchers® LH 10 | OMG Borchers GmbH | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...view more Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. view less | |
| Borchers® VP 0132 | OMG Borchers GmbH | Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary ...view more Borchers® VP 0132 is a new primary drier based on an organically modified Vanadium compound. It is suitable either for clearcoats or for pigmented solventborne oxidatively drying coating systems. Borchers® VP 0132 should replace other established primary driers, especially cobalt siccatives. This product provides both rapid surface dry and also good through-drying properties. view less | |
| Borchers® VP 9950 | OMG Borchers GmbH | Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especial...view more Borchers® VP 9950 is a new water-soluble Vanadium based drier to be used as a primary drier in waterborne oxidatively drying coatings and as a dampening solution additive in printing ink systems. It can be a replacement for other primary driers, especially for cobalt siccatives. This product provides fast drying of the film surface of water based coating systems. view less | |
| Borchi® Coll 10 | OMG Borchers GmbH | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | OMG Borchers GmbH | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | OMG Borchers GmbH | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | OMG Borchers GmbH | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| Borchi® Gel 0434 | OMG Borchers GmbH | Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optima...view more Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optimal viscosity in all waterborne coatings for application by brush or roller, especially under higher-shear conditions (> 1000 s-1). It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0435 | OMG Borchers GmbH | Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. B...view more Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. Borchi® Gel 0435 is characterized by its extraordinary efficacy in most coating systems under high-shear conditions, which makes the product particularly well suited for setting the optimal viscosity in all waterborne coatings for application by roller or brush. It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0620 | OMG Borchers GmbH | Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with bind...view more Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with binder particles and pigments a pronounced shear-thinning flow behavior. This product is suitable as thickening agent for all waterborne systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0621 | OMG Borchers GmbH | Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other compon...view more Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other components of the system a shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0625 | OMG Borchers GmbH | Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity...view more Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity stability mainly in the range between 1000 s-1 - 10000 s-1. This product is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel 0626 | OMG Borchers GmbH | Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high...view more Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high-shear range (1000 - 10000 s-1). It is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel ALA | OMG Borchers GmbH | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| Borchi® Gel D8 | OMG Borchers GmbH | Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance ...view more Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance and promotes corrosion resistance. It is suited for use as a thickener for solvent-based and solvent-free binders. view less | |
| Borchi® Gel L 75 N | OMG Borchers GmbH | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| Borchi® Gel L 76 | OMG Borchers GmbH | Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also ...view more Borchi® Gel L 76 is a polyurethane-based, non-ionogenic thickener. lt is supplied as a low-viscosity preparation in water in the form of an emulsion. This product acts as a flow promoter and improves the application properties of emulsion paints and also stabilises aqueous pigmented paints. view less | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less |
