| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...view more DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...view more DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
| LM5201 | Sartomer Americas | LM5201 is a difunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5301 | Sartomer Americas | LM5301 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5302 | Sartomer Americas | LM5302 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5401 | Sartomer Americas | LM5401 is a tetrafunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5601 | Sartomer Americas | LM5601 is a pentafunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM7201 | Sartomer Americas | LM7201 is a difunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| LM7202 | Sartomer Americas | LM7202 is a trifunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| LM7401 | Sartomer Americas | LM7401 is a monofunctional acrylated amine synergist for use in UV/LED and EB curing applications. | |
| MCURE® 206 | Sartomer Americas | MCURE® 206 is a new aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as high diluting power, high gloss retention, good weatherability and fast cure. | |
| MCURE® 301 | Sartomer Americas | MCURE® 301 is an aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as excellent viscosity reduction, high reactivity and good cure rate at low temperature. | |
| MCURE® 400 | Sartomer Americas | MCURE® 400 is an aliphatic acrylate monomer used as a high performance reactive diluent for 2K epoxy amine systems. It provides key benefits such as extremely fast cure particularly at low temperature, good chemical resistance ans high toughness. | |
| SARBIO 5101 | Sartomer Americas | SARBIO 5101 is a monofunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 80%. It is used for UV/EB curing compositions, which offers low surface tension, high flexibility, and good water resistance to formulations. | |
| SARBIO 5102 | Sartomer Americas | SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylat...view more SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylate. view less | |
| SARBIO 5105 | Sartomer Americas | SARBIO 5105 is a monofunctional acrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SARBIO 5106 | Sartomer Americas | SARBIO 5106 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SARBIO 5201 | Sartomer Americas | SARBIO 5201 is a difunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 60%. It is used for UV/EB curing compositions, and it offers high hydrophobicity and good flexibility to your formulations. | |
| SARBIO 5300 | Sartomer Americas | SARBIO 5300 is a trifunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 15%. It is used for UV/EB curing compositions, and it offers reactivity and good pigment wetting to formulations. | |
| SARBIO 6101 | Sartomer Americas | SARBIO 6101 is a monofunctional methacrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers hydrophobicity, low Tg, and low surface tension to your formulations. | |
| SARBIO 6104 | Sartomer Americas | SARBIO 6104 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6105 | Sartomer Americas | SARBIO 6105 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6106 | Sartomer Americas | SARBIO 6106 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis. | |
| SARBIO 6201 | Sartomer Americas | SARBIO 6201 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6202 | Sartomer Americas | SARBIO 6202 is a difunctional acrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis. | |
| SARBIO 7101 | Sartomer Americas | SARBIO 7101 is an epoxy acrylate with a minimum BRC (BioRenewable Carbon Content) of 70% for use in ultra violet and electron beam curing compositions. This product offers very good flexibility to formulations and is particularly suitable for coating appl...view more SARBIO 7101 is an epoxy acrylate with a minimum BRC (BioRenewable Carbon Content) of 70% for use in ultra violet and electron beam curing compositions. This product offers very good flexibility to formulations and is particularly suitable for coating applications. view less | |
| SARBIO 7102 | Sartomer Americas | SARBIO 7102 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 10%. It is particularly suitable for ink applications. It offers excellent pigment wetting, very good water balance and excellent flow to formulations. | |
| SARBIO 7104A70 | Sartomer Americas | SARBIO 7104A70 is a difunctional epoxy acrylate diluted with 30% of TPGDA for use in UV/LED and EB curing applications. | |
| SARBIO 7109 | Sartomer Americas | SARBIO 7109 is a difunctional epoxy acrylate oligomer for use in UV/LED and EB curing applications. | |
| SARBIO 7109D80 | Sartomer Americas | SARBIO 7109D80 is a difunctional epoxy acrylate oligomer diluted with 20% of GPTA for use in UV/LED and EB curing applications. | |
| SARBIO 7201 | Sartomer Americas | SARBIO 7201 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 45%. It is particularly suitable for low viscosity and ink applications with a very high reactivity and a very good pigment wetting. | |
| SARBIO 7202 | Sartomer Americas | SARBIO 7202 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 45%. It is particularly suitable for ink and coating applications. It offers excellent pigment wetting, very good water balance and good reactivity to formulations. | |
| SARBIO 7210 | Sartomer Americas | SARBIO 7210 is a tetrafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| SARET 1110 | Sartomer Americas | SARET 1110 is a dry liquid non nitroso scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 297F | Sartomer Americas | SARET 297F is a non nitroso scorch protected difunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 350W | Sartomer Americas | SARET 350W is a scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 517 | Sartomer Americas | SARET 517 is a non nitroso scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SB400 | Sartomer Americas | SB400 is an octofunctional acid based adhesion oligomer diluted with 30% of PGME for use in UV/LED and EB curing applications. | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...view more SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. view less | |
| Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Speedblock 1130 | Sartomer Americas | SpeedBlock 1130 is a liquid hydroxyphenyl benzotriazole type UV absorber for use in coatings and adhesives. SpeedBlock 1130 is typically used at 0.1 - 2.0% depending on the processing conditions and end application. | |
| SpeedBlock 770 | Sartomer Americas | SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end applica...view more SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application. view less | |
| SpeedBlock DP74 | Sartomer Americas | SpeedBlock DP74 is a fluorescent whitening agent, with excellent stability in low pH systems, for use in ink and coating applications. SpeedBlock DP74 is used in warm white and pastel tones where the degree of whiteness of the paint/ink needs intensifying...view more SpeedBlock DP74 is a fluorescent whitening agent, with excellent stability in low pH systems, for use in ink and coating applications. SpeedBlock DP74 is used in warm white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock 74 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock 74 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements. view less | |
| SpeedBlock OB-184 | Sartomer Americas | SpeedBlock OB-184 is a fluorescent whitening agent, with excellent chemical and thermal stability, for use in ink and coating applications. SpeedBlock OB-184 is used in white and pastel tones where the degree of whiteness of the paint/ink needs intensifyi...view more SpeedBlock OB-184 is a fluorescent whitening agent, with excellent chemical and thermal stability, for use in ink and coating applications. SpeedBlock OB-184 is used in white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock OB-184 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock OB-184 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements. view less | |
| Speedblock UV-0 | Sartomer Americas | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Sartomer Americas | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...view more SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. view less | |
| Speedblock UV-9 | Sartomer Americas | SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions a...view more SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application. view less | |
| SpeedBlock UV-92 | Sartomer Americas | SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditio...view more SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditions and end application. view less | |
| Speedcure 2-ITX | Sartomer Americas | SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combi...view more SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| SpeedCure 2022 | Sartomer Americas | SpeedCure 2022 is a liquid formulated blend of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| SpeedCure 210 | Sartomer Americas | SpeedCure 210 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and...view more SpeedCure 210 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| SpeedCure 2100 | Sartomer Americas | SpeedCure 2100 is a liquid formulated blend of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 2959 | Sartomer Americas | SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations. | |
| SpeedCure 4265 | Sartomer Americas | SpeedCure 4265 is a liquid formulated blend of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 500 | Sartomer Americas | SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and...view more SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. view less | |
| Speedcure 5070 | Sartomer Americas | Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...view more Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. view less | |
| Speedcure 7005 | Sartomer Americas | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...view more SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. view less | |
| Speedcure 7010 | Sartomer Americas | SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low mig...view more SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure 7010-L | Sartomer Americas | SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when use...view more SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure 7040 | Sartomer Americas | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...view more SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. view less | |
| Speedcure 73 | Sartomer Americas | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Sartomer Americas | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 937 | Sartomer Americas | SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and L...view more SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| Speedcure 938 | Sartomer Americas | SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED cur...view more SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| SpeedCure 939 | Sartomer Americas | SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulati...view more SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| Speedcure 97 | Sartomer Americas | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure 976 | Sartomer Americas | SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. | |
| Speedcure 976D | Sartomer Americas | SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulat...view more SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. view less | |
| SpeedCure 976s | Sartomer Americas | SpeedCure 976s is cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976s provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 992 | Sartomer Americas | SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5lwt% in UV curable formulation...view more SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5lwt% in UV curable formulations. view less | |
| Speedcure BCIM | Sartomer Americas | SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in ...view more SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in UV and LED curable formulations. view less | |
| Speedcure BDMB | Sartomer Americas | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Sartomer Americas | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Sartomer Americas | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...view more SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| Speedcure BKL | Sartomer Americas | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Sartomer Americas | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...view more SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure BP | Sartomer Americas | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...view more SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. view less | |
| SpeedCure BPO | Sartomer Americas | SpeedCure BPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 281, 365 and 395.nm. SpeedCure BPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure CPTX | Sartomer Americas | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...view more SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure DETX | Sartomer Americas | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...view more SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less |
