| Bisomer® BDDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...view more Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. view less | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...view more Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. view less | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...view more Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. view less | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...view more Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...view more Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...view more Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. view less | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...view more Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. view less | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...view more Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. view less | |
| Bisomer® IPGMA TG | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® IPGMA TG (isopropylideneglycerol methacrylate) is a low viscosity, low odour methacrylate monomer. It is bio-based, not classified as a VOC and risk and hazard label-free. It can be used as a reactive diluent or as a co-monomer in acrylic resins. | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...view more Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). view less | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...view more Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). view less | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...view more Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. view less | |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...view more Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...view more Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). view less | |
| Bisomer® PEM63P HD | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, ...view more Bisomer® PEM63P HD is an ethylene oxide / propylene oxide block co-polymer and its hydroxyl functional group is essentially secondary. It is non-toxic and has an EINECS “Polymer” classification. This product has an inhibitor (MEHQ) content of 500-800ppm, an acid number of 0.3mg KOH/g max., and a hydroxyl value of 100-120mgKOH/g. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticizing properties when incorporated into polymers. Due to the positioning of its hydrophilic and hydrophobic components, Bisomer® PEM63P HD is ideal in the preparation of emulsion polymers for use in pigment dispersing resins and polyurethane dispersions (PUDs). Bisomer® PEM63P HD is an ideal candidate as a polymerisable surfactant in associative thickeners. view less | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| Bisomer® PPM5 HI | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPM5 HI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...view more Bisomer® PPM5 HI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer® PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. view less | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...view more Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. view less | |
| Bisomer® S10 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecu...view more Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecular weight of 1080g/mol, and an water content of 49-51%. It is water soluble and contains approximately 23 EO units within the chain. Bisomer® S10 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax -like solid. view less | |
| Bisomer® S20 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) ...view more Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) content of 0.22-0.28%, and an acidity - methacrylic acid of 0.1% max. Bisomer® S20 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax-like solid. view less | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...view more Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| LM5201 | Sartomer Americas | LM5201 is a difunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5301 | Sartomer Americas | LM5301 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5302 | Sartomer Americas | LM5302 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5401 | Sartomer Americas | LM5401 is a tetrafunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| LM5601 | Sartomer Americas | LM5601 is a pentafunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SARBIO 5101 | Sartomer Americas | SARBIO 5101 is a monofunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 80%. It is used for UV/EB curing compositions, which offers low surface tension, high flexibility, and good water resistance to formulations. | |
| SARBIO 5102 | Sartomer Americas | SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylat...view more SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylate. view less | |
| SARBIO 5105 | Sartomer Americas | SARBIO 5105 is a monofunctional acrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SARBIO 5106 | Sartomer Americas | SARBIO 5106 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SARBIO 5201 | Sartomer Americas | SARBIO 5201 is a difunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 60%. It is used for UV/EB curing compositions, and it offers high hydrophobicity and good flexibility to your formulations. | |
| SARBIO 5300 | Sartomer Americas | SARBIO 5300 is a trifunctional acrylate monomer with a minimum BRC (BioRenewable Carbon Content) of 15%. It is used for UV/EB curing compositions, and it offers reactivity and good pigment wetting to formulations. | |
| SARBIO 6101 | Sartomer Americas | SARBIO 6101 is a monofunctional methacrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers hydrophobicity, low Tg, and low surface tension to your formulations. | |
| SARBIO 6104 | Sartomer Americas | SARBIO 6104 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6105 | Sartomer Americas | SARBIO 6105 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6106 | Sartomer Americas | SARBIO 6106 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis. | |
| SARBIO 6201 | Sartomer Americas | SARBIO 6201 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SARBIO 6202 | Sartomer Americas | SARBIO 6202 is a difunctional acrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis. | |
| SARET 1110 | Sartomer Americas | SARET 1110 is a dry liquid non nitroso scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 297F | Sartomer Americas | SARET 297F is a non nitroso scorch protected difunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 350W | Sartomer Americas | SARET 350W is a scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SARET 517 | Sartomer Americas | SARET 517 is a non nitroso scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds. | |
| SR203H | Sartomer Americas | SR203H is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR205H | Sartomer Americas | SR205H is a clear liquid difunctional methacrylic monomer which is a coagent used in peroxide or E.B. vulcanisation. It has low vapour pressure, low viscosity and a high boiling point. | |
| SR206 | Sartomer Americas | SR206 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SR210CG | Sartomer Americas | SR210CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis. | |
| SR210HH | Sartomer Americas | SR210HH is a high performance difunctional methacrylic monomer designed for use as a reactive diluent in free radical polimerization or as a polymer crosslinker. It features low shrinkage, excellent flexibility, high hardness and abrasion resistance. | |
| SR214 | Sartomer Americas | SR214 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR217 | Sartomer Americas | SR217 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR238 | Sartomer Americas | SR238 is a clear liquid difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR239CG | Sartomer Americas | SR289CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications. | |
| SR239EU | Sartomer Americas | SR239EU is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SR252 | Sartomer Americas | SR252 is a clear liquid difunctional methacrylic monomer which is a coagent in peroxide vulcanization. This is a water dispersible monomer producing soft, flexible films. Other performance properties include adhesion and low shrinkage. | |
| SR256 | Sartomer Americas | SR256 is a clear liquid ethyl acrylate. It is a mono functional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR257C | Sartomer Americas | SR257C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR259 | Sartomer Americas | SR259 is a clear liquid diacrylate. It is a difunctional oligoether acrylate which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR261 | Sartomer Americas | SR261 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR285 | Sartomer Americas | SR285 is a clear liquid monofunctional acrylic monomer, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR295 | Sartomer Americas | SR295 is a clear to cloudy liquid/solid tetrafunctional acrylic monomer, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR306 | Sartomer Americas | SR306 is a clear liquid difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR313E | Sartomer Americas | SR313E is a clear liquid monofunctional monomer which can be polymerised by free radicals. | |
| SR324 | Sartomer Americas | SR324 is a waxy solid monofunctional monomer which can be polymerised by free radicals. Typical applications are a comonomer in polymers for paints, varnishes, inks and non woven fabrics and an additive in coatings, adhesives and sealants. | |
| SR335 | Sartomer Americas | SR335 is a monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. Key properties offered by lauryl acrylate include good solvency, good flexibility, low shrinkag...view more SR335 is a monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. Key properties offered by lauryl acrylate include good solvency, good flexibility, low shrinkage, good adhesion, and low odour. view less | |
| SR339C | Sartomer Americas | SR339C is a clear liquid monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are good solvency, good reactivity, low shrinkage, g...view more SR339C is a clear liquid monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are good solvency, good reactivity, low shrinkage, good adhesion, and good flexibility. view less | |
| SR341 | Sartomer Americas | SR341 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR344 | Sartomer Americas | SR344 is a clear to hazy liquid difunctional low viscosity oligoether acrylate which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR348C | Sartomer Americas | SR348C is a multifunctional methacrylic monomer which is a coagent used in peroxide or E.B vulcanization. It has a fast cure response, a very low volatility, and a high boiling point. | |
| SR348L | Sartomer Americas | SR348L is a high viscosity two mole ethoxylated bisphenol A dimethacrylate that is used as a coagent in peroxide or EB curing. This product has fast cure response, very low volatility and a high boiling point. | |
| SR349 | Sartomer Americas | SR349 is a monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. This product offers the following key properties to formulations: excellent lithographic printing, good cure response, and scratch resistance. | |
| SR350CG | Sartomer Americas | SR350CG is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications. | |
| SR350D | Sartomer Americas | SR350D is a trifunctional methacrylic monomer that is a co-agent in peroxide or EB curing. This has been the workhorse of the peroxide cure elastomer industry for the last 20 years. | |
| SR351 | Sartomer Americas | SR351 is a TMPTA, trifunctional, low viscosity monomer acrylate which can be polymerised by free radicals. | |
| SR355 | Sartomer Americas | SR355 is a low viscosity tetrafunctional oligoacrylate which can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product has very high reactivity, very good scratch, and very good chemical...view more SR355 is a low viscosity tetrafunctional oligoacrylate which can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product has very high reactivity, very good scratch, and very good chemical resistance. It is resilient rather than brittle and exhibits very low skin irritation. view less | |
| SR368 | Sartomer Americas | SR368 is a trifunctional oligoacrylate that can be polymerised by free radicals. In particular it is used in U.V and E.B cured coatings, inks, and adhesives. This product is readily soluble, has high reactivity, good scratch-resistance, good adhesion, goo...view more SR368 is a trifunctional oligoacrylate that can be polymerised by free radicals. In particular it is used in U.V and E.B cured coatings, inks, and adhesives. This product is readily soluble, has high reactivity, good scratch-resistance, good adhesion, good chemical resistance, and heat resistance. view less | |
| SR395 | Sartomer Americas | SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resis...view more SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resistance. view less | |
| SR399 | Sartomer Americas | SR399 is a pentafunctional oligoacrylate that can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product offers very high reactivity, very good scratch-resistance, very good chemical resi...view more SR399 is a pentafunctional oligoacrylate that can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product offers very high reactivity, very good scratch-resistance, very good chemical resistance, resilient rather than brittle, very low skin irritation, and free hydroxyl groups. view less | |
| SR420 | Sartomer Americas | SR420 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR421A | Sartomer Americas | SR421A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR444F | Sartomer Americas | SR444F is a trifunctional acrylic monomer for use in UV/LED and EB curing coatings applications. | |
| SR454 | Sartomer Americas | SR454 is a clear liquid trifunctional low viscosity oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include good solvency, high reactivity, good chemical resistance, good flexibility, and low skin irritati...view more SR454 is a clear liquid trifunctional low viscosity oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include good solvency, high reactivity, good chemical resistance, good flexibility, and low skin irritation. view less | |
| SR484 | Sartomer Americas | SR484 is a monofunctional acrylic monomer with a long chain hydrophobic back-bone, which can be polymerised by free radicals. This product has low shrinkage, good adhesion, water resistance, good flexibility, and weatherability. | |
| SR489 | Sartomer Americas | SR489 is a clear liquid monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. Key properties offered include excellent solvency, low shrinkage, good adhesion, excellent water resistance, and good flexibility. Furthe...view more SR489 is a clear liquid monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. Key properties offered include excellent solvency, low shrinkage, good adhesion, excellent water resistance, and good flexibility. Furthermore, it has low odour. view less | |
| SR492 | Sartomer Americas | SR492 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR494 | Sartomer Americas | SR494 is a low viscosity tetrafunctional oligoether acrylate that can be polymerized by free radicals. In particular, it is used in UV and EB cured coatings, inks and adhesives. This product has good solvency, high reactivity and low skin irritation. | |
| SR495B | Sartomer Americas | SR495B is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR499 | Sartomer Americas | SR499 is a trifunctional oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include fast curing, weatherability, heat resistance, hardness & abrasion resistance, low shrinkage and good adhesion. | |
| SR506E | Sartomer Americas | SR506E is a high performance monofunctional acrylic monomer designed for use in UV and EB curing applications. | |
| SR508 | Sartomer Americas | SR508 is a difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings. The key properties are excellent solvency, low viscosity, high reactivity, good elasticity, and good adhesion. | |
| SR531 | Sartomer Americas | SR531 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR540 | Sartomer Americas | SR540 is a low volatility monomer used in free radical polymerisation. It provides a good hydrophobic and hydrophilic balance, and it has a fast cure response, a very low volatility and heat resistance. | |
| SR548 | Sartomer Americas | SR548 is a monofunctional methacrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis. | |
| SR550 | Sartomer Americas | SR550 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR561 | Sartomer Americas | SR561 is a difunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR586 | Sartomer Americas | SR586 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. |
