| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...view more 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. view less | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...view more 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. view less | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4702-X-50 Chain Stopped Alkyd Resin | Gabriel Performance Products | 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...view more 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. view less | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...view more 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. view less | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...view more 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. view less | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 4965-XMP-80 High Solids Silicone Modified Short Oil | Gabriel Performance Products | 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellen...view more 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellent adhesion to most metal surfaces. view less | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...view more 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. view less | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...view more 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. view less | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...view more CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...view more CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...view more CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. view less | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...view more CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
| CN UVA421 | Sartomer Americas | CN UVA421 is a low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. It can be used as the sole binder or with the addition of monomers. Alternatively, it can be used in combination with other oligom...view more CN UVA421 is a low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. It can be used as the sole binder or with the addition of monomers. Alternatively, it can be used in combination with other oligomers to improve the reactivity. view less | |
| CN104 | Sartomer Americas | CN104 is an epoxy acrylate oligomer for use in UV and EB curing composition. Its high reactivity, chemical resistance and film hardness make it a suitable choice for use in topcoats and sealers for paper, wood, metal decorating and for ink formulations. | |
| CN104A80 | Sartomer Americas | CN104A80 is a clear, viscous liquid epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) tripropylene glycol diacrylate for use in UV and EB curing compositions. It is particularly suitable for roller coating paper varnishes and wood co...view more CN104A80 is a clear, viscous liquid epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) tripropylene glycol diacrylate for use in UV and EB curing compositions. It is particularly suitable for roller coating paper varnishes and wood coatings. view less | |
| CN104B80 | Sartomer Americas | CN104B80 is the epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) hexanediol diacrylate SR238 for use in UV and EB curing compositions. Its high reactivity, chemical resistance, film hardness and flexibility are key properties which ...view more CN104B80 is the epoxy acrylate oligomer supplied in the multi-functional acrylate (MFA) hexanediol diacrylate SR238 for use in UV and EB curing compositions. Its high reactivity, chemical resistance, film hardness and flexibility are key properties which make it a useful component in topcoats and sealers. view less | |
| CN104D80 | Sartomer Americas | CN104D80 is a clear, viscous liquid blend of an epoxy acrylate oligomer supplied in the oligoether acrylate glyceryl propoxy triacrylate for use in UV and EB curing compositions. Its high reactivity, chemical resistance and film hardness make it a useful ...view more CN104D80 is a clear, viscous liquid blend of an epoxy acrylate oligomer supplied in the oligoether acrylate glyceryl propoxy triacrylate for use in UV and EB curing compositions. Its high reactivity, chemical resistance and film hardness make it a useful component in lithographic ink and varnish formulations as well as for wood coatings and roller coat varnishes. view less | |
| CN109 | Sartomer Americas | CN109 is a clear, viscous liquid thixotropic modified epoxy acrylate oligomer for use in UV and EB curing compositions. Its high reactivity, chemical resistance and film hardness make it a useful component in varnish formulations for wood coatings. | |
| CN111 | Sartomer Americas | CN111 is an epoxidised soya bean oil acrylate for use in UV and EB curing compositions with good flexibility and pigment wetting, which are particularly important in overprint varnishes and lithographic inks. | |
| CN112C60 | Sartomer Americas | CN112C60 is a trifunctional epoxy novolac acrylate oligomer diluted with 40% of TMPTA for use in UV/LED and EB curing applications. | |
| CN113D70 | Sartomer Americas | CN113D70 is a trifunctional modified epoxy novolac acrylate oligomer diluted with 30% of GPTA for use in UV/LED and EB curing applications. | |
| CN122A80 | Sartomer Americas | CN122A80 is a trifunctional epoxy novolac acrylate oligomer diluted with 40% of TPGDA for use in UV/LED and EB curing applications. | |
| CN131BEU | Sartomer Americas | CN131BEU is a monofunctional aromatic epoxy acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN132 | Sartomer Americas | CN132 is a low viscosity aliphatic diacrylate oligomer that allows fast UV and EB curing into chemically resistant, flexible, yet strong films. This product is recommended for applications where high reactivity in combination with low viscosity are requir...view more CN132 is a low viscosity aliphatic diacrylate oligomer that allows fast UV and EB curing into chemically resistant, flexible, yet strong films. This product is recommended for applications where high reactivity in combination with low viscosity are required. view less | |
| CN159 | Sartomer Americas | CN159 is a clear liquid bisphenol A epoxy methacrylate for use in peroxide curing compositions. This product offers the following key properties: heat resistance, hardness, and chemical resistance. | |
| CN186 | Sartomer Americas | CN186 is a clear liquid aromatic epoxy acrylate for use in UV and EB curable coatings and inks. It has a very good rheological behaviour and offers good pigment wetting. Additionally, this product has a high flexibility. | |
| CN1964 | Sartomer Americas | CN1964 is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN1964CG | Sartomer Americas | CN1964CG is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN1965 | Sartomer Americas | CN1963 is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN1965CG | Sartomer Americas | CN1963 is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN1993 | Sartomer Americas | CN1993 is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN1993CG | Sartomer Americas | CN1993CG is a difunctional aliphatic urethane methacrylate oligomer for use in UV/LED/EB and peroxide curing applications. | |
| CN2003EU | Sartomer Americas | CN2003EU is a clear liquid modified epoxy acrylate for use in ultra violet and electron beam curing compositions. Key properties include high flexibility, excellent adhesion on metal and plastics, and low shrinkage. | |
| CN203 | Sartomer Americas | CN203 is a low viscosity polyester acrylate for use in UV and EB curing compositions. This product, which is very compatible with other UV curing oligomers, offers the following key properties: high reactivity, non yellowing, excellent adhesion, very good...view more CN203 is a low viscosity polyester acrylate for use in UV and EB curing compositions. This product, which is very compatible with other UV curing oligomers, offers the following key properties: high reactivity, non yellowing, excellent adhesion, very good hardness, and very good sanding. Furthermore, it has low odour. view less | |
| CN2035 | Sartomer Americas | CN2035 is a difunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2203EU | Sartomer Americas | CN2203EU is a difunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2210 | Sartomer Americas | CN2210 is a tetrafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2295EU | Sartomer Americas | CN2295EU is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2303EU | Sartomer Americas | CN2303EU is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2305 | Sartomer Americas | CN2305 is a hyperbranched polyester acrylate for use in ultra violet and electron beam curing compositions. This very low viscosity product offers very high reactivity, high scratch resistance and low shrinkage. | |
| CN2505 | Sartomer Americas | CN2505 is a low viscosity tetrafunctional polyester acrylate for use in ultra violet and electron beam curing compositions. Key properties include flexibility and good adhesion to a wide variety of substrates. | |
| CN2555 | Sartomer Americas | CN2555 is a tetrafunctional polyester acrylate for use in ultra violet and electron beam curing compositions. It offers excellent pigment wetting, high reactivity, and flexibility. | |
| CN2560 | Sartomer Americas | CN2560 is a tetrafunctional polyester acrylate for use in ultra violet and electron beam curing compositions. Key properties offered include excellent pigment wetting, high reactivity, and flexibility. | |
| CN2565 | Sartomer Americas | CN2565 is a difunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2608A | Sartomer Americas | CN2608A is a difunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN2609 | Sartomer Americas | CN2609 is a polyester acrylate which offers excellent adhesion to formulations. It is particularly suitable for metal coatings (primers) and metallized plastic coatings. | |
| CN2610 | Sartomer Americas | CN2610 is a polyester acrylate for use in ultra violet and electron beam curing compositions. It was specially developed to offer very good adhesion to melamine surfaces. | |
| CN2634 | Sartomer Americas | CN2634 is an acrylate oligomer for use in ultra violet and electron beam curing compositions, wood parquet, furniture application and metal coatings. It has excellent abrasion resistance, excellent flexibility and low viscosity. | |
| CN2911 | Sartomer Americas | CN2911 is a difunctional acrylic oligomer for use in UV/LED and EB curing applications. | |
| CN2912 | Sartomer Americas | CN2912 is a trifunctional acrylic oligomer for use in UV/LED and EB curing applications. | |
| CN293LV | Sartomer Americas | CN293LV is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN294E | Sartomer Americas | CN294E is a dark liquid tetrafunctional polyester acrylate for use in UV and EB curing formulations. It has very good lithographic behavior, good pigment wetting and high reactivity. It is particularly recommended for lithographic inks. | |
| CN3705 | Sartomer Americas | CN3705 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. It offers low yellowing and low pigment bleed. | |
| CN3715 | Sartomer Americas | CN3715 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. Key properties include high reactivity, flexibility, low pigment bleed, and chemical resistance. | |
| CN3755 | Sartomer Americas | CN3755 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. It offers good adhesion, toughness, excellent resistance properties, low yellowing, and very low pigment bleed. | |
| CN381 | Sartomer Americas | CN381 is a copolymerisable amine acrylate used as synergist in combination with a suitable photoinitiator to increase speed of cure, especially at the surface of UV curable coatings. Other features include its low irritancy, odour and good stability. | |
| CN386 | Sartomer Americas | CN386 is a clear liquid, low viscosity copolymerisable amine acrylate used as a synergist in combination with a suitable photoinitiator to increase speed of cure, especially at the surface of UV curable coatings. | |
| CN550 | Sartomer Americas | CN386 is a trifunctional amine modified polyether acrylate for use in UV/LED and EB curing applications. | |
| CN6510EU | Sartomer Americas | CN6510EU is a difunctional specialty oligomer for use in UV/LED and EB curing applications. | |
| CN704 | Sartomer Americas | CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic...view more CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic substrates. view less | |
| CN736 | Sartomer Americas | CN736 is a difunctional chlorinated polyester acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN790 | Sartomer Americas | CN790 is a clear, viscous liquid saturated polyester supplied in the oligoether acrylate ethoxylated trimethylolpropane triacrylate SR454 for use in UV and EB curing compositions. Pigment wetting, good adhesion to plastics and flexibility make it particul...view more CN790 is a clear, viscous liquid saturated polyester supplied in the oligoether acrylate ethoxylated trimethylolpropane triacrylate SR454 for use in UV and EB curing compositions. Pigment wetting, good adhesion to plastics and flexibility make it particularly suitable as a media for letterpress and lithographic inks. view less | |
| CN890 | Sartomer Americas | CN890 is a clear liquid multifunctional melamine acrylate for use in ultra violet and electron beam curing compositions. It offers the following key properties: excellent adhesion to plastics, scratch resistance, non yellowing, and durability. | |
| CN9001 | Sartomer Americas | CN9001 is a difunctional aliphatic urethane acrylate oligomer for use in UV/LED and EB curing applications. | |
| CN9002 | Sartomer Americas | CN9002 is a clear liquid difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. This low viscosity oligomer offers low colour, flexibility, non-yellowing, and adhesion. It is particularly suitable for adhes...view more CN9002 is a clear liquid difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. This low viscosity oligomer offers low colour, flexibility, non-yellowing, and adhesion. It is particularly suitable for adhesives, industrial coatings, and inks. view less | |
| CN9012 | Sartomer Americas | CN9012 is an aliphatic urethane diacrylate for use in UV and EB curing compositions. | |
| CN910A70 | Sartomer Americas | CN910A70 is a difunctional aliphatic urethane acrylate oligomer, supplied in TPGDA for use in UV and EB curing coatings, inks and adhesives. It is particularly used as the main binder in screen inks. | |
| CN9165A | Sartomer Americas | CN9165A is a clear liquid tetrafunctional aromatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include fast cure response, excellent adhesion, scratch resistance, and film hardness. | |
| CN9196 | Sartomer Americas | CN9196 is an hexafunctional aromatic urethane acrylate oligomer for use in UV/LED and EB curing applications. |
