| CN3705 | Sartomer Americas | CN3705 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. It offers low yellowing and low pigment bleed. | |
| CN3715 | Sartomer Americas | CN3715 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. Key properties include high reactivity, flexibility, low pigment bleed, and chemical resistance. | |
| CN3755 | Sartomer Americas | CN3755 is an acrylated amine synergist for use in ultra violet and electron beam curing compositions. It offers good adhesion, toughness, excellent resistance properties, low yellowing, and very low pigment bleed. | |
| CN381 | Sartomer Americas | CN381 is a copolymerisable amine acrylate used as synergist in combination with a suitable photoinitiator to increase speed of cure, especially at the surface of UV curable coatings. Other features include its low irritancy, odour and good stability. | |
| CN386 | Sartomer Americas | CN386 is a clear liquid, low viscosity copolymerisable amine acrylate used as a synergist in combination with a suitable photoinitiator to increase speed of cure, especially at the surface of UV curable coatings. | |
| CN704 | Sartomer Americas | CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic...view more CN704 is a clear to hazy acrylated polyester adhesion promoter for use in UV and EB curing compositions. It has good adhesion to plastics, like polyethylene and polypropylene, and flexibility make it particularly suitable for coatings and inks for plastic substrates. view less | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...view more EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. view less | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...view more EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. view less | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...view more EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. view less | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...view more EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. view less | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...view more EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. view less | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...view more EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...view more EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...view more EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. view less | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...view more EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...view more EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. view less | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....view more EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...view more EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...view more EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...view more EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. view less | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...view more EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. view less | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...view more EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. view less | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...view more EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...view more EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. view less | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...view more EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. view less | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...view more EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. view less | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...view more EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. view less | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...view more ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...view more ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. view less | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...view more ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. view less | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...view more ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. view less | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...view more ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. view less | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...view more ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...view more ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. view less | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...view more ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. view less | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...view more ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. view less | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...view more ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. view less | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...view more ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. view less | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...view more ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. view less | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...view more ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. view less | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...view more ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. view less | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...view more ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. view less | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...view more ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. view less | |
| SARBIO 7102 | Sartomer Americas | SARBIO 7102 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 10%. It is particularly suitable for ink applications. It offers excellent pigment wetting, very good water balance and excellent flow to formulations. | |
| Speedblock 1130 | Sartomer Americas | SpeedBlock 1130 is a liquid hydroxyphenyl benzotriazole type UV absorber for use in coatings and adhesives. SpeedBlock 1130 is typically used at 0.1 - 2.0% depending on the processing conditions and end application. | |
| SpeedBlock 770 | Sartomer Americas | SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end applica...view more SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application. view less | |
| Speedblock UV-0 | Sartomer Americas | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Sartomer Americas | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...view more SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. view less | |
| Speedblock UV-9 | Sartomer Americas | SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions a...view more SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application. view less | |
| SpeedBlock UV-92 | Sartomer Americas | SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditio...view more SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditions and end application. view less | |
| Speedcure 2-ITX | Sartomer Americas | SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combi...view more SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitization of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| SpeedCure 2022 | Sartomer Americas | SpeedCure 2022 is a liquid formulated blend of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| SpeedCure 210 | Sartomer Americas | SpeedCure 210 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and...view more SpeedCure 210 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| SpeedCure 2100 | Sartomer Americas | SpeedCure 2100 is a liquid formulated blend of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 2959 | Sartomer Americas | SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations. | |
| SpeedCure 4265 | Sartomer Americas | SpeedCure 4265 is a liquid formulated blend of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 500 | Sartomer Americas | SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and...view more SpeedCure 500 is a blend of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. view less | |
| Speedcure 5070 | Sartomer Americas | Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications wher...view more Speedcure 5070 is a low migration formulated photoinitiator created for food packaging related applications of UV flexographic, offset and screen printing inks where low migration as a main characteristic is mandatory, but can be used in applications where low odour and migration are necessary in troublesome cure colours like black. This transparent yellow to amber liquid can be applied to UV Flexo, offset, screen and UV printing inks. view less | |
| Speedcure 7005 | Sartomer Americas | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...view more SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. view less | |
| Speedcure 7010 | Sartomer Americas | SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low mig...view more SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure 7010-L | Sartomer Americas | SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when use...view more SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure 7040 | Sartomer Americas | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...view more SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. view less | |
| Speedcure 73 | Sartomer Americas | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Sartomer Americas | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 937 | Sartomer Americas | SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and L...view more SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| Speedcure 938 | Sartomer Americas | SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED cur...view more SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| SpeedCure 939 | Sartomer Americas | SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulati...view more SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| Speedcure 97 | Sartomer Americas | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure 976 | Sartomer Americas | SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. | |
| Speedcure 976D | Sartomer Americas | SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulat...view more SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations. view less | |
| SpeedCure 976s | Sartomer Americas | SpeedCure 976s is cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976s provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 992 | Sartomer Americas | SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5lwt% in UV curable formulation...view more SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5lwt% in UV curable formulations. view less | |
| Speedcure BCIM | Sartomer Americas | SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in ...view more SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in UV and LED curable formulations. view less | |
| Speedcure BDMB | Sartomer Americas | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Sartomer Americas | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Sartomer Americas | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...view more SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| Speedcure BKL | Sartomer Americas | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Sartomer Americas | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...view more SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure BP | Sartomer Americas | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...view more SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. view less | |
| SpeedCure BPO | Sartomer Americas | SpeedCure BPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 281, 365 and 395.nm. SpeedCure BPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure CPTX | Sartomer Americas | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...view more SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure DETX | Sartomer Americas | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...view more SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Speedcure DMB | Sartomer Americas | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EDB | Sartomer Americas | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Sartomer Americas | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EMK | Sartomer Americas | SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergis...view more SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations. view less |
