| SpeedCure TEM | Sartomer Americas | SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED cura...view more SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED curable formulations. view less | |
| Speedcure TPO | Sartomer Americas | SpeedCure TPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 267, 298 and 380 nm. SpeedCure TPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure TPO-L | Sartomer Americas | SpeedCure TPO-L is a liquid Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 274, 290 and 370 nm. SpeedCure TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| SpeedCure VLT | Sartomer Americas | SpeedCure VLT is a highly reactive photoinitiator based on fluorinated diaryl-bis-cyclopentadienyl titanium complex for radical polymerization of unsaturated resins upon exposure to visible light (daylight) or UV light. It is especially suited for the cur...view more SpeedCure VLT is a highly reactive photoinitiator based on fluorinated diaryl-bis-cyclopentadienyl titanium complex for radical polymerization of unsaturated resins upon exposure to visible light (daylight) or UV light. It is especially suited for the curing of photopolymers for imaging, specialty adhesive and information storage applications. SpeedCure VLT also acts as an effective sensitizer for diaryliodonium type cationic photoinitiators and can therefore be used to promote cure of cationic formulations with visible light. SpeedCure VLT can be described as photobleaching and can be used to produce very thick coatings. Best results are obtained when oxygen is excluded from the resin system during curing. view less | |
| Speedcure XFs | Sartomer Americas | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at ...view more SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. view less | |
| SpeedCure XFs01 | Sartomer Americas | SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formul...view more SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formulations. view less | |
| Speedcure XKm | Sartomer Americas | SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined wi...view more SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| SR203H | Sartomer Americas | SR203H is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR205H | Sartomer Americas | SR205H is a clear liquid difunctional methacrylic monomer which is a coagent used in peroxide or E.B. vulcanisation. It has low vapour pressure, low viscosity and a high boiling point. | |
| SR206 | Sartomer Americas | SR206 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SR210CG | Sartomer Americas | SR210CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis. | |
| SR210HH | Sartomer Americas | SR210HH is a high performance difunctional methacrylic monomer designed for use as a reactive diluent in free radical polimerization or as a polymer crosslinker. It features low shrinkage, excellent flexibility, high hardness and abrasion resistance. | |
| SR214 | Sartomer Americas | SR214 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR217 | Sartomer Americas | SR217 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR238 | Sartomer Americas | SR238 is a clear liquid difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR239CG | Sartomer Americas | SR289CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications. | |
| SR239EU | Sartomer Americas | SR239EU is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications. | |
| SR252 | Sartomer Americas | SR252 is a clear liquid difunctional methacrylic monomer which is a coagent in peroxide vulcanization. This is a water dispersible monomer producing soft, flexible films. Other performance properties include adhesion and low shrinkage. | |
| SR256 | Sartomer Americas | SR256 is a clear liquid ethyl acrylate. It is a mono functional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR257C | Sartomer Americas | SR257C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR259 | Sartomer Americas | SR259 is a clear liquid diacrylate. It is a difunctional oligoether acrylate which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR261 | Sartomer Americas | SR261 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR285 | Sartomer Americas | SR285 is a clear liquid monofunctional acrylic monomer, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR295 | Sartomer Americas | SR295 is a clear to cloudy liquid/solid tetrafunctional acrylic monomer, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR306 | Sartomer Americas | SR306 is a clear liquid difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR313E | Sartomer Americas | SR313E is a clear liquid monofunctional monomer which can be polymerised by free radicals. | |
| SR324 | Sartomer Americas | SR324 is a waxy solid monofunctional monomer which can be polymerised by free radicals. Typical applications are a comonomer in polymers for paints, varnishes, inks and non woven fabrics and an additive in coatings, adhesives and sealants. | |
| SR335 | Sartomer Americas | SR335 is a monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. Key properties offered by lauryl acrylate include good solvency, good flexibility, low shrinkag...view more SR335 is a monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. Key properties offered by lauryl acrylate include good solvency, good flexibility, low shrinkage, good adhesion, and low odour. view less | |
| SR336 | Sartomer Americas | SR336 is a monofunctional aliphatic acrylic monomer for use as a reactive diluent in UV/EB or peroxide cured formulations or as a co-monomer for polyacrylates synthesis. | |
| SR339C | Sartomer Americas | SR339C is a clear liquid monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are good solvency, good reactivity, low shrinkage, g...view more SR339C is a clear liquid monofunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are good solvency, good reactivity, low shrinkage, good adhesion, and good flexibility. view less | |
| SR341 | Sartomer Americas | SR341 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR344 | Sartomer Americas | SR344 is a clear to hazy liquid difunctional low viscosity oligoether acrylate which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. | |
| SR348C | Sartomer Americas | SR348C is a multifunctional methacrylic monomer which is a coagent used in peroxide or E.B vulcanization. It has a fast cure response, a very low volatility, and a high boiling point. | |
| SR348L | Sartomer Americas | SR348L is a high viscosity two mole ethoxylated bisphenol A dimethacrylate that is used as a coagent in peroxide or EB curing. This product has fast cure response, very low volatility and a high boiling point. | |
| SR349 | Sartomer Americas | SR349 is a monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. This product offers the following key properties to formulations: excellent lithographic printing, good cure response, and scratch resistance. | |
| SR350CG | Sartomer Americas | SR350CG is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications. | |
| SR350D | Sartomer Americas | SR350D is a trifunctional methacrylic monomer that is a co-agent in peroxide or EB curing. This has been the workhorse of the peroxide cure elastomer industry for the last 20 years. | |
| SR351 | Sartomer Americas | SR351 is a TMPTA, trifunctional, low viscosity monomer acrylate which can be polymerised by free radicals. | |
| SR355 | Sartomer Americas | SR355 is a low viscosity tetrafunctional oligoacrylate which can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product has very high reactivity, very good scratch, and very good chemical...view more SR355 is a low viscosity tetrafunctional oligoacrylate which can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product has very high reactivity, very good scratch, and very good chemical resistance. It is resilient rather than brittle and exhibits very low skin irritation. view less | |
| SR368 | Sartomer Americas | SR368 is a trifunctional oligoacrylate that can be polymerised by free radicals. In particular it is used in U.V and E.B cured coatings, inks, and adhesives. This product is readily soluble, has high reactivity, good scratch-resistance, good adhesion, goo...view more SR368 is a trifunctional oligoacrylate that can be polymerised by free radicals. In particular it is used in U.V and E.B cured coatings, inks, and adhesives. This product is readily soluble, has high reactivity, good scratch-resistance, good adhesion, good chemical resistance, and heat resistance. view less | |
| SR395 | Sartomer Americas | SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resis...view more SR395 is a monofunctional acrylic monomer that can be polymerised by free radicals. In particular, it is used in U.V & E.B curing coatings, inks, and adhesives. This product has excellent solvency, good flexibility, low shrinkage and excellent water resistance. view less | |
| SR399 | Sartomer Americas | SR399 is a pentafunctional oligoacrylate that can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product offers very high reactivity, very good scratch-resistance, very good chemical resi...view more SR399 is a pentafunctional oligoacrylate that can be polymerised by free radicals. In particular, it is used in U.V and E.B cured coatings, inks and adhesives. This product offers very high reactivity, very good scratch-resistance, very good chemical resistance, resilient rather than brittle, very low skin irritation, and free hydroxyl groups. view less | |
| SR420 | Sartomer Americas | SR420 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR421A | Sartomer Americas | SR421A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR423D | Sartomer Americas | SR423D is a monofunctional methacrylic monomer designed for use as reactive diluent in peroxyde curing systems or as a co-monomer for high solids polyacrylates. It provides key benefits such as low viscosity, low shrinkage, high hardness and good adhesion...view more SR423D is a monofunctional methacrylic monomer designed for use as reactive diluent in peroxyde curing systems or as a co-monomer for high solids polyacrylates. It provides key benefits such as low viscosity, low shrinkage, high hardness and good adhesion. view less | |
| SR444F | Sartomer Americas | SR444F is a trifunctional acrylic monomer for use in UV/LED and EB curing coatings applications. | |
| SR454 | Sartomer Americas | SR454 is a clear liquid trifunctional low viscosity oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include good solvency, high reactivity, good chemical resistance, good flexibility, and low skin irritati...view more SR454 is a clear liquid trifunctional low viscosity oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include good solvency, high reactivity, good chemical resistance, good flexibility, and low skin irritation. view less | |
| SR484 | Sartomer Americas | SR484 is a monofunctional acrylic monomer with a long chain hydrophobic back-bone, which can be polymerised by free radicals. This product has low shrinkage, good adhesion, water resistance, good flexibility, and weatherability. | |
| SR489 | Sartomer Americas | SR489 is a clear liquid monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. Key properties offered include excellent solvency, low shrinkage, good adhesion, excellent water resistance, and good flexibility. Furthe...view more SR489 is a clear liquid monofunctional acrylic monomer for use in ultra violet and electron beam curing compositions. Key properties offered include excellent solvency, low shrinkage, good adhesion, excellent water resistance, and good flexibility. Furthermore, it has low odour. view less | |
| SR492 | Sartomer Americas | SR492 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR494 | Sartomer Americas | SR494 is a low viscosity tetrafunctional oligoether acrylate that can be polymerized by free radicals. In particular, it is used in UV and EB cured coatings, inks and adhesives. This product has good solvency, high reactivity and low skin irritation. | |
| SR495B | Sartomer Americas | SR495B is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR499 | Sartomer Americas | SR499 is a trifunctional oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties include fast curing, weatherability, heat resistance, hardness & abrasion resistance, low shrinkage and good adhesion. | |
| SR506E | Sartomer Americas | SR506E is a high performance monofunctional acrylic monomer designed for use in UV and EB curing applications. | |
| SR508 | Sartomer Americas | SR508 is a difunctional acrylic monomer which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings. The key properties are excellent solvency, low viscosity, high reactivity, good elasticity, and good adhesion. | |
| SR531 | Sartomer Americas | SR531 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR540 | Sartomer Americas | SR540 is a low volatility monomer used in free radical polymerisation. It provides a good hydrophobic and hydrophilic balance, and it has a fast cure response, a very low volatility and heat resistance. | |
| SR548 | Sartomer Americas | SR548 is a monofunctional methacrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis. | |
| SR550 | Sartomer Americas | SR550 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis. | |
| SR552 | Sartomer Americas | SR552 is a high performance monofunctional methacrylic monomer designed for use as reactive diluent in peroxide curing systems or as a co-monomer for polymer synthesis. This low Tg product provides a good flexibility, a good adhesion, a good pigment dispe...view more SR552 is a high performance monofunctional methacrylic monomer designed for use as reactive diluent in peroxide curing systems or as a co-monomer for polymer synthesis. This low Tg product provides a good flexibility, a good adhesion, a good pigment dispersion, a low shrinkage and watersolubility. view less | |
| SR561 | Sartomer Americas | SR561 is a difunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR567P | Sartomer Americas | SR567P is a new ethoxylated long chain alkyl methacrylate co-monomer for polymer synthesis. Its unique chemistry offers key benefits: water solubility, enhanced associative properties and a very good hydrophilic-hydrophobic balance. | |
| SR586 | Sartomer Americas | SR586 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR595 | Sartomer Americas | SR595 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis. | |
| SR602 | Sartomer Americas | SR602 is a difunctional oligoether acrylate that can be polymerized by free radicals. In particular, it is used in UV and EB coatings, inks and adhesives. This product has good pigment wetting, good flexibility, and low shrinkage. | |
| SR604 | Sartomer Americas | SR604 is a monofunctional monomer with flexibility and low shrinkage. It has a dual functionality and can be used in dual cured systems. This product is recommended for use in adhesives, cosmetics, electronics, and photopolymers. | |
| SR606A | Sartomer Americas | SR606A is a difunctional acrylic monomer for use in UV/LED and EB curing applications. | |
| SR610 | Sartomer Americas | SR610 is a difunctional low viscosity oligoether acrylate, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are offered: low shrinkage, good adhesion, very ...view more SR610 is a difunctional low viscosity oligoether acrylate, which can be polymerised by free radicals. In particular, it is used in U.V & E.B cured coatings, inks and adhesives. The following key properties are offered: low shrinkage, good adhesion, very low skin irritation, very flexible and water compatible. view less | |
| SR833S | Sartomer Americas | SR833S is a low viscosity difunctional acrylate, which can be polymerised by free radicals. This product can be used in a wide variety of UV and EB cured applications where flexibility and adhesion are required. It will impart toughness into the film whil...view more SR833S is a low viscosity difunctional acrylate, which can be polymerised by free radicals. This product can be used in a wide variety of UV and EB cured applications where flexibility and adhesion are required. It will impart toughness into the film whilst maintaining its non yellowing characteristics. view less | |
| SR834 | Sartomer Americas | SR834 is a difunctional monomer which offers a number of benefits in peroxide curing applications including low volatility, good hardness and relatively fast cures. | |
| SR9003 | Sartomer Americas | SR9003 is a very low viscosity oligoether acrylate for use in ultra violet and electron beam curing compositions. Key properties offered include good solvency, good flexibility, good chemical resistance, and excellent wetting properties. | |
| SR9020 | Sartomer Americas | SR9020 is a trifunctional low viscosity oligoether acrylate that can be polymerised by free radicals. In particular, it is used in U.V & E.B cued coatings, inks and adhesives. This product offers good solvency, good reactivity, good chemical resistance, a...view more SR9020 is a trifunctional low viscosity oligoether acrylate that can be polymerised by free radicals. In particular, it is used in U.V & E.B cued coatings, inks and adhesives. This product offers good solvency, good reactivity, good chemical resistance, and excellent lithographic printing properties. view less | |
| SR9035 | Sartomer Americas | SR9035 is a clear liquid low viscosity water soluble ethoxylated trimethylolpropane triacrylate for use in ultra violet and electron beam curing compositions. Key properties include high reactivity, excellent flexibility, and low shrinkage. It also provid...view more SR9035 is a clear liquid low viscosity water soluble ethoxylated trimethylolpropane triacrylate for use in ultra violet and electron beam curing compositions. Key properties include high reactivity, excellent flexibility, and low shrinkage. It also provides good adhesion to many substrates. view less | |
| SR9050 | Sartomer Americas | SR9050 is an acidic monoacrylate adhesion promoter that is recommended for use typically at 1-20% by weight in free radical polymerising UV and EB applications. This product is recommended for use in coatings and inks on glass and metals. | |
| SR9051P | Sartomer Americas | SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on g...view more SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
| SR9054 | Sartomer Americas | SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metal...view more SR9054 is a unique acid acrylate adhesion promoter that is typically recommended for use at 1 - 20% by weight in free-radical polymerization, UV and EB applications. It is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less | |
| Surkofilm® 64S | BIP (Oldbury) Ltd | Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 64S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It imparts softness and flexibility for reverse printing on PE and OPP. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 62H | BIP (Oldbury) Ltd | Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 62H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is a harder version Surkofilm® 64S. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wher...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less | |
| Surkofilm® 71H | BIP (Oldbury) Ltd | Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 71H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is used for the production of lamination inks for nylon and other films. view less | |
| Surkofilm® 72S | BIP (Oldbury) Ltd | Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where...view more Surkofilm® 72S is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It is generally used for reverse printing & lamination inks. view less | |
| Surkofilm® 90H | BIP (Oldbury) Ltd | Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where...view more Surkofilm® 90H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety if substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. It has low viscosity and a hard PU component when in combination with vinyl resins. view less | |
| Surkofilm® MR 132 | BIP (Oldbury) Ltd | Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates wh...view more Surkofilm® MR 132 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Surkofilm® MR 132 is a mixed aromatic/aliphatic polyurethane for reverse printing onto PE & OPP. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| Uvi-Cure S105E | Sartomer Americas | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S128 | Sartomer Americas | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S130 | Sartomer Americas | UviCure S130 is an alcohol functional mono oxetane. It is used as a reactive diluent in cationic formulations and will increase curing speed and adhesion when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Sartomer Americas | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| UviCure S140 | Sartomer Americas | UviCure S140 is a low viscosity monofunctional oxetane suitable for cationic formulations. It will reduce the viscosity of resin formulations and give added flexibility to a cured coating when polymerised with onium salt photoinitiators. | |
| UviCure S150 | Sartomer Americas | UviCure S150 is a difunctional aromatic oxetane which can be used as an additive in cationic formulations to increase hardness, chemical resistance and thermal resistance when polymerised with onium salt photoinitiators. | |
| UviCure S160 | Sartomer Americas | UviCure S160 is an aromatic difunctional oxetane which can be used in cationic formulations to give cured films with high chemical resistance, mechanical strength and minimised shrinkage when polymerised with onium salt photoinitiators. |
