| WorléeCryl A 5125 W | Worlée-Chemie G.m.b.H. | WorléeCryl A 5125 W is a solvent-free hydroxyacrylate for isocyanate cross-linked two component top coats which exhibit long pot-life and good adhesion. A glossy coating can be applied in high layer-thicknesses. | |
| WorléeFen F 130 | Worlée-Chemie G.m.b.H. | WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. ...view more WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. It is also well compatible with drying oils. view less | |
| WorléeKyd AC 2550 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2550 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2550 is compatible with some short and medium oil length drying alkyds. W´Kyd AC 2550 is mainly recommended for very fast drying primers and top coats. | |
| WorléeKyd AC 2551 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2551 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2551 is mainly recommended for very fast drying primers and top coats. This product has a non volatile content of 60% ± 1, and it is soluble in all usual solvents. | |
| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An additi...view more WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An addition of urea resin and acid catalyst is not necessary. view less | |
| WorléeKyd C 641 | Worlée-Chemie G.m.b.H. | WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick...view more WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick solvent release, good recoatability at any time and very good yellowing resistance. view less | |
| WorléeKyd CD 32 | Worlée-Chemie G.m.b.H. | WorléeKyd CD 32 is a short oil alkyd resin based on special fatty acids. It has application mainly in combination with suitable amino resins for the manufacture of high reactive stoving paints. This grade has a 42% content of phthalic anhydride. It can al...view more WorléeKyd CD 32 is a short oil alkyd resin based on special fatty acids. It has application mainly in combination with suitable amino resins for the manufacture of high reactive stoving paints. This grade has a 42% content of phthalic anhydride. It can also be applied for air drying primers and top coats. view less | |
| WorléeKyd L 138 | Worlée-Chemie G.m.b.H. | WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short o...view more WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short oil alkyds and with some medium oil length alkyds and nitro cellulose. To reduce the viscosity and improve viscosity stability in heavily filled systems, a small addition of an alcohol, e.g. butanol is recommended. view less | |
| WorléeKyd MH 38 | Worlée-Chemie G.m.b.H. | WorléeKyd MH 38 is a short oil, very quick drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. W´Kyd MH 38 is compatible with most short and some medium oil length alkyd resins. W´Kyd MH 38 is mainly used for quick ...view more WorléeKyd MH 38 is a short oil, very quick drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. W´Kyd MH 38 is compatible with most short and some medium oil length alkyd resins. W´Kyd MH 38 is mainly used for quick drying primers and top coats with good elasticity. view less | |
| WorléeKyd MH 42 | Worlée-Chemie G.m.b.H. | WorléeKyd MH 42 is an air drying alkyd resin for use in anti-corrosion primers and top coats. W´Kyd MH 42 is compatible with short oil, medium oil and some long oil alkyd resins. Furthermore there is good compatibility with physical drying binders like vi...view more WorléeKyd MH 42 is an air drying alkyd resin for use in anti-corrosion primers and top coats. W´Kyd MH 42 is compatible with short oil, medium oil and some long oil alkyd resins. Furthermore there is good compatibility with physical drying binders like vinyl mixed polymerisates (e.g. Laroflex, BASF) and chlorinated rubber (e.g. Pergut, Bayer). view less | |
| WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short ...view more WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). view less | |
| WorléeKyd MH 439 (60% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length ...view more WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). W´Kyd MH 439 can also be used for fast drying and high resistant industrial enamels. view less | |
| WorléeKyd RM 232 | Worlée-Chemie G.m.b.H. | WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is us...view more WorléeKyd RM 232 is a short oil drying alkyd resin used for the manufacture of air and forced drying primers and top coats. It is also used for acid curing systems. This product is based on conjugated castor oil and special fatty acids. W´Kyd RM 232 is used in conjunction with reactive unmodified urea and/or melamine resins for stoving primers, top coats and one coat paints. view less | |
| WorléeKyd SM 400 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 400 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. This product is based on vegetable fatty acids. W´Kyd SM 400 is compatible with most short oil and some medium oil lengt...view more WorléeKyd SM 400 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and finishes. This product is based on vegetable fatty acids. W´Kyd SM 400 is compatible with most short oil and some medium oil length alkyd resins. view less | |
| WorléeKyd SM 426 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil le...view more WorléeKyd SM 426 is a short oil, very fast drying alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 426 is compatible with most short oil and some medium oil length alkyd resins. W´Kyd SM 426 is also compatible with the most usual butylated and iso butylated urea and melamine resins as well as with resin esters, maleic resins and modified phenolic resins. view less | |
| WorléeKyd SM 433 | Worlée-Chemie G.m.b.H. | WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and wi...view more WorléeKyd SM 433 is a short oil, extremely fast drying alkyd resin used for the production of air drying and oven curing primers and top coats. This grade has a non volatile content of 60% ± 1. W´Kyd SM 433 is compatible with short oil alkyd resins and with some medium oil types. It is partially compatible with vinyl mixed polymerisates, e. g. Laroflex, BASF. view less | |
| WorléePol® 191 | Worlée-Chemie G.m.b.H. | WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and ve...view more WorléePol® 191 is an oil free, saturated and branched polyester resin, which is water thinnable after neutralization. It is used in the manufacture of water thinnable stoving primers and top coats. Primers based on W´Pol 191 have excellent adhesion and very good flexibility. view less | |
| WorléePol® 194 | Worlée-Chemie G.m.b.H. | WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mech...view more WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation of non-yellowing, high gloss top coats with good resistance to chemicals. view less | |
| WorléePol® 6631 | Worlée-Chemie G.m.b.H. | WorléePol® 6631 is a branched hydroxyl group containing polyester, which is suitable for the manufacture of light and weather resistant 2 component paints. Reaction partners for W´Pol 6631 are especially aliphatic isocyanates, type Tolonate HDB-75. This c...view more WorléePol® 6631 is a branched hydroxyl group containing polyester, which is suitable for the manufacture of light and weather resistant 2 component paints. Reaction partners for W´Pol 6631 are especially aliphatic isocyanates, type Tolonate HDB-75. This combination shows excellent light resistance, gloss retention and weather as well as chemical and abrasion resistance. view less | |
| WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds an...view more WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds and urea formaldehyde resins. Even small quantities of W´Sin MK 223 in these lacquers improve hardness, scratch resistance and film build. view less | |
| WorléeSol 07 A | Worlée-Chemie G.m.b.H. | WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neu...view more WorléeSol 07 A is an air drying, water thinnable alkyd used for the manufacture of water thinnable air and forced drying primers and top coats with a relatively low viscosity. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 75%. Primers based on W´Sol 07 A show a very fast drying, excellent adhesion, long term elasticity and good corrosion resistance. view less | |
| WorléeSol 61 A | Worlée-Chemie G.m.b.H. | WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers base...view more WorléeSol 61 A is an air drying alkyd used for the manufacture of water thinnable, air and forced drying primers and top coats. It is a special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 A show a very fast drying and throughdrying with excellent corrosion resistance. The best corrosion resistance will be obtained with the chromate free combination zinc phosphate ZP 20 + 0.5-2.0% Alcophor 827 (Heubach/Henkel). view less | |
| WorléeSol 61 E | Worlée-Chemie G.m.b.H. | WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to ...view more WorléeSol 61 E is an air drying, special fatty acid based alkyd, which will be water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 61 E show a very fast drying and through drying with excellent corrosion resistance. Due to it’s excellent wetting properties W´Sol 61 E is especially suitable for the manufacture of haze-free high gloss lacquers. view less | |
| WorléeSol 64 E | Worlée-Chemie G.m.b.H. | WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers...view more WorléeSol 64 E is a short oil, air drying alkyd resin used for the manufacture of water thinnable air and forced drying primers and top coats. It is modified with special fatty acids and water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 64 E show very fast drying and good anti corrosion properties. The application of W´Sol 64 E systems is similar to the conventional systems, e.g. spraying, dipping, flow coating etc. view less | |
| WorléeSol 65 A | Worlée-Chemie G.m.b.H. | WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinna...view more WorléeSol 65 A is an air drying short oil alkyd used for the manufacture of water thinnable, air drying, and forced dried primers and top coats. This grade has a non volatile content of 70% ± 2. It is based on specially fatty acids, and it is water thinnable after neutralization with ammonia or amines. Primers based on W´Sol 65 A have a very good corrosion resistance. view less | |
| WorléeSol 65 E | Worlée-Chemie G.m.b.H. | WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, aird...view more WorléeSol 65 E is an air-drying short oil alkyd-based on special fatty acids. It is water thinnable after neutralization with ammonia or amines. This grade has a non volatile content of 70% ± 1. It is designed for the manufacture of water thinnable, airdrying and forced dried primers and top coats. Primers based on W´Sol 65 E have a very good corrosion resistance if they are pigmented with e.g. zinc phosphate PZ 20 / Alcophor 827 (Henkel). view less | |
| WorléeSol 84 C | Worlée-Chemie G.m.b.H. | WorléeSol 84 C is a short oil, water thinnable alkyd resin for stoving systems like primers, clear and top coats. This grade has a non volatile content of 44% ± 1. The delivery form, 1% cosolvents, allows formulations with a total solvent content < 1%. | |
| WorléeSol 85 A | Worlée-Chemie G.m.b.H. | WorléeSol 85 A is a modified water thinnable alkyd resin for stoving systems. This grade has a non volatile content of 43% ± 1. It is especially suitable for the manufacture of water thinnable stoving systems like primers, automotive fillers, clear and to...view more WorléeSol 85 A is a modified water thinnable alkyd resin for stoving systems. This grade has a non volatile content of 43% ± 1. It is especially suitable for the manufacture of water thinnable stoving systems like primers, automotive fillers, clear and top coats. view less | |
| WorléeThix S 2655 | Worlée-Chemie G.m.b.H. | WorléeThix S 2655 is a short oil, very fast drying thixotropic alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 2. W´Thix S 2655 is a general purpose thixotropic combinati...view more WorléeThix S 2655 is a short oil, very fast drying thixotropic alkyd resin used for the manufacture of air drying and stoving primers and top coats. This grade has a non volatile content of 60% ± 2. W´Thix S 2655 is a general purpose thixotropic combination resin with very good drying properties for primers and top coats. view less | |
| WorléeThix S 6455 | Worlée-Chemie G.m.b.H. | WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also comp...view more WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. W´Thix S 6455 is especially suitable for the manufacture of thixotropic primers, fillers, gloss and silk gloss paints as well as for wood glazings. view less | |
| WorléeThix SD 6051 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with...view more WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. It is also used for wood glazings. view less | |
| WorléeThix SD 6051 (55% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins...view more WorléeThix SD 6051 (55% In Dearomatized HC 180-220) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. W´Thix SD 6051 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with the common maleic and phenolic modified hard resins. This grade has a non volatile content of 55% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix SD 6051 reduces sagging from vertical surfaces. view less | |
| WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This gr...view more WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) is a urethane modified long oil alkyd with a soft gel structure. The thixotropy is temperature and polar solvents stable. It is used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 40% ± 1.5. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. view less | |
| WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is comp...view more WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) is a urethane modified long oil alkyd with a soft gel structure. It used for the manufacture of thick layer coatings and lacquers. This grade has a non volatile content of 50% ± 2. W´Thix V 800 is compatible with most medium and long oil drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. Paints and lacquers based on W´Thix V 800 have very good brushability, excellent flow and also at thick layers very good through drying. Due to the very good through drying, early stackability is achieved. Natural and artificial cold check tests have indicated long term elasticity. view less |
