| DOUBLEMER® 236 | DBC Europe GmbH | DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or elect...view more DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion to metals, plastics and papers. Formulated UV/EB curable products containing DOUBLEMER® 236 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommened for use in: wet lithographic inks for paper, plastics and metals; adhesion promoter for coatings on metals, plastics and paper; lithographic overprint varnishes; and post-formable inks. view less | |
| WorléeCryl® 7120 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7120 is a styrene acrylic copolymer emulsion. It is used for corrosion inhibiting primers on different metals (e.g. iron, aluminium), and it has good weather resistance. This grade is supplied in the form of 49% in water. | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...view more WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. view less | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| WorléeKyd BS 830 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd B...view more WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd BS 830 have good drying and resistance properties and very good gloss retention. view less | |
| WorléePol® 165 | Worlée-Chemie G.m.b.H. | WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechan...view more WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. view less | |
| WorléeSol E 530 W | Worlée-Chemie G.m.b.H. | WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically a...view more WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative drying, a cobalt drier is not necessary in many cases. Varnishes based on W´Sol E 530 W show good wood firing, good water and chemical resistance and high abrasion resistance. This grade has a non volatile content of 30% ± 1. view less |
