| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 rheological additive is an easily dispersible powder designed for lower - gloss and matt latex paints, textured and high-build aqueous coatings and waterborne adhesives. This organically modified hectorite clay based thickener is especially...view more BENAQUA® 4000 rheological additive is an easily dispersible powder designed for lower - gloss and matt latex paints, textured and high-build aqueous coatings and waterborne adhesives. This organically modified hectorite clay based thickener is especially useful in systems that are diluted with water prior to use. In lime cement rendering it improves workability and sag and slump resistance. view less | Request Sample |
| BENATHIX® | Elementis | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...view more BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. view less | Request Sample |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is a modified bentonite organoclay for solventborne low polarity aliphatic and aromatic paint and coating systems. BENTONE® 1000 is highly efficient and cost-effective. | Request Sample |
| BENTONE® 27 | Elementis | BENTONE® 27 rheological additive is a modified hectorite organoclay for use in high polarity aromatic and oxygenated solventborne paint and coating systems. | Request Sample |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | Request Sample |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | Request Sample |
| BENTONE® 52 | Elementis | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...view more BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. view less | Request Sample |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...view more BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. view less | Request Sample |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...view more BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. view less | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE rheological additive is a refined hectorite modifier for easy dispersion. This clay based thickener is a suitable rheology modifier for various waterborne paints and coatings systems and especially for aqueous architectural coatings and spray ...view more BENTONE® DE rheological additive is a refined hectorite modifier for easy dispersion. This clay based thickener is a suitable rheology modifier for various waterborne paints and coatings systems and especially for aqueous architectural coatings and spray applied industrial coatings. view less | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® DY CE | Elementis | BENTONE® DY CE rheological additve additive is an organically modified powdered clay based thickener specially designed for waterborne paint and aqueous coating systems. This rheology modifier provides structured low shear viscosity build, synersis contro...view more BENTONE® DY CE rheological additve additive is an organically modified powdered clay based thickener specially designed for waterborne paint and aqueous coating systems. This rheology modifier provides structured low shear viscosity build, synersis control and excellent storage stability. view less | Request Sample |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | Request Sample |
| BENTONE® GS | Elementis | BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and ...view more BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and concrete. view less | Request Sample |
| BENTONE® HC | Elementis | BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less | Request Sample |
| BENTONE® LT | Elementis | BENTONE® LT rheological additive is an organically modified refined hectorite clay based thickener designed for waterborne paints and aqueous coating systems, primarily latex paints. This rheology modifier contributes to low and mid shear viscosity build...view more BENTONE® LT rheological additive is an organically modified refined hectorite clay based thickener designed for waterborne paints and aqueous coating systems, primarily latex paints. This rheology modifier contributes to low and mid shear viscosity build an in-can stability. view less | Request Sample |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | Request Sample |
| BENTONE® P270 CO | Elementis | BENTONE® P270 CO is a pre-activated hectorite based organoclay in castor oil. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE® P380 MS | Elementis | BENTONE® P380 MS is a pre-activated hectorite based organoclay in odourless mineral spirits. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...view more BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. view less | Request Sample |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...view more BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. view less | Request Sample |
| BENTONE SD®-3 | Elementis | BENTONE SD®-3 rheological additive is a modified bentonite organoclay for solventborne medium polarity aliphatic and aromatic paint and coating systems. BENTONE SD®-3 provides stable viscosity, controls sag and suspends pigments. | Request Sample |
| BENTONE® WBS | Elementis | BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, im...view more BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, improves workability, and is compatible with other thickeners. This product is recommended for waterborne decorative latex paints and similar systems, gypsum plasters, and buiding materials such as mortars and renderings based on lime, cement, and gypsum. view less | Request Sample |
| DAPRO® AP 7010 | Elementis | DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less | Request Sample |
| DAPRO® AP 7010S | Elementis | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® BEZ 75 | Elementis | DAPRO® BEZ 75 rheological additive is an organocaly activator and can be used in solventborne coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. This rheology modifier can be ...view more DAPRO® BEZ 75 rheological additive is an organocaly activator and can be used in solventborne coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. This rheology modifier can be incorporated to produce easy to handle BENTONE® pre-gels for aromatic- free systems and improves anti-settling. view less | Request Sample |
| DAPRO® DF 17 | Elementis | DAPRO® DF 17 is a general purpose, VOC-free let down defoamer for aqueous decorative coatings. DAPRO® DF 17 can be used in all waterborne paints and decorative coatings and is suitable for a broad range of latex systems. | Request Sample |
| DAPRO® DF 21 | Elementis | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...view more DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. view less | Request Sample |
| DAPRO® DF 52 | Elementis | DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unaccept...view more DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unacceptable in the chemical waste water. view less | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less | Request Sample |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of...view more DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. view less | Request Sample |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is a resistance reducing agent for reducing the resistance of solventbased paints that are sprayed electrostatically. | Request Sample |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 agent is a low odour aqueous coalescing agent that has been designed for waterborne dispersions, dispersion paints and plasters. | Request Sample |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clea...view more DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clear liquid and is predominately based on renewable resources. view less | Request Sample |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. This product is easy to incorporate in solventborne coatings and inks. | Request Sample |
| DAPRO® S-65 | Elementis | DAPRO® S-65 is an interfacial tension modifier for solventborne paint and coatings systems. This flow and levelling agent is also suitable for UV curable coatings and ink systems. | Request Sample |
| DAPRO® U99 | Elementis | DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as water...view more DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as waterborne and solventborne alkyd systems and decorative coatings. view less | Request Sample |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...view more DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. view less | Request Sample |
| DUMACIL® 100 FGK | Elementis | DUMACIL® 100 FGK is a very hydrophobic silica and easily dispersable in organic systems. It provided excellent performance in defoamers for use in paint, paper, latex and textile industries. | Request Sample |
| DUMACIL® 300 FGK | Elementis | DUMACIL® 300 FGK is micro-fine silica treated with an organic silica compound. The resultant silica is extremely hydrophobic and easily dispersed in organic system. DUMACIL® 300 FGK provides excellent performance in defoamers for use in paint, paper, late...view more DUMACIL® 300 FGK is micro-fine silica treated with an organic silica compound. The resultant silica is extremely hydrophobic and easily dispersed in organic system. DUMACIL® 300 FGK provides excellent performance in defoamers for use in paint, paper, latex and textile industries. view less | Request Sample |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemic...view more Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemical resistance properties. Gloss control is achieved by varying the amount of Epomatt G-151 in the formulation. Smooth matt finishes with 60° gloss values ranging from 2% to 70% can be achieved with Epomatt G-151. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| M-P-A® 2000 X | Elementis | M-P-A 2000 X rheological additive is an easily incorporated, highly efficient organic anti settling and sag control agent supplied as a pourable dispersion in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating ap...view more M-P-A 2000 X rheological additive is an easily incorporated, highly efficient organic anti settling and sag control agent supplied as a pourable dispersion in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating applications. view less | Request Sample |
| M-P-A® 60 X | Elementis | M-P-A® 60 X rheological additive is a highly efficient anti settling and sag control agent supplied as a soft paste dispersed in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating applications. | Request Sample |
| NALZIN® 2 | Elementis | NALZIN® 2, a zinc hydroxy phosphite, is a modern non-toxic anti-corrosive aqueous corrosion inhibitor suitable for waterborne and solvent-borne paints alike. Manufactured by a patented process, NALZIN® 2 has excellent corrosion-inhibiting properties and i...view more NALZIN® 2, a zinc hydroxy phosphite, is a modern non-toxic anti-corrosive aqueous corrosion inhibitor suitable for waterborne and solvent-borne paints alike. Manufactured by a patented process, NALZIN® 2 has excellent corrosion-inhibiting properties and is cost-effective. view less | Request Sample |
| NALZIN® FA 179 | Elementis | NALZIN® FA 179 is recommended as an corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for aqueous application as an inhibitor against the formation of in-can corrosion. Emulsified i...view more NALZIN® FA 179 is recommended as an corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for aqueous application as an inhibitor against the formation of in-can corrosion. Emulsified in water, NALZIN® FA 179 can also be used as a temporary rust inhibitor. view less | Request Sample |
| NALZIN® FA 579 | Elementis | NALZIN® FA 579 is a nitrite-free liquid corrosion inhibitor for aqueous coatings which counteracts flash rusting and in-can corrosion. Emulsified in water NALZIN® FA 579 is also used as a temporary rust inhibitor. It is suitable for low-pH formulations. | Request Sample |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a liquid aqueous dispersing and wetting agent agent for use in waterborne, VOC- compliant colorants and pigment dispersions. | Request Sample |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can als...view more NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can also be used as a interfacial tension modifier of compatibilizer. view less | Request Sample |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 is a unique solvent free/ VOC - free aqueous pigment dispersing and wetting agent specifically used in waterborne paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueou...view more NUOSPERSE® 2008 is a unique solvent free/ VOC - free aqueous pigment dispersing and wetting agent specifically used in waterborne paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as well as organic solvent based coatings and inks. view less | Request Sample |
| NUOSPERSE® 657 RD | Elementis | NUOSPERSE® 657 RD is a wetting and dispersing solvent for pigments which can be applied to practically all solvent based paint systems. The product can also be applied in the vinyl industry. It contains very low content of cyclic aromatic hydrocarbons. By...view more NUOSPERSE® 657 RD is a wetting and dispersing solvent for pigments which can be applied to practically all solvent based paint systems. The product can also be applied in the vinyl industry. It contains very low content of cyclic aromatic hydrocarbons. By adding NUOSPERSE® 657 RD to the pigment paste before the grinding process, a quicker wetting of the pigments as well as a better degree of dispersion is obtained. This allows a shorter grinding time, low viscosity of the grinding paste, improved stability and better coloring and covering of the paint. view less | Request Sample |
| NUOSPERSE® 757 | Elementis | NUOSPERSE® 757 is a modified alkyd resin pigment wetting and dispersing agent which can be used in a wide range of non-aqueous/solventborne paint systems. NUOSPERSE® 757 contains a very low content of cyclic aromatic hydrocarbons. | Request Sample |
| NUOSPERSE® 9850 | Elementis | NUOSPERSE® 9850 polymeric colorant dispersing and wetting agent is highly effective for carbon black and most types of organic pigments. It is also suitable for inorganic pastes. NUOSPERSE® 9850 offers a rapid pigment wetting and excellent pigment stabili...view more NUOSPERSE® 9850 polymeric colorant dispersing and wetting agent is highly effective for carbon black and most types of organic pigments. It is also suitable for inorganic pastes. NUOSPERSE® 9850 offers a rapid pigment wetting and excellent pigment stability. It is recommended for use in a wide range of high-performance, solventborne coatings and is an effective dispersant for both paints and colorants. view less | Request Sample |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is an aqueous compatibilizer additive to improve the incorporation of universal waterborne tinting pastes into the base dispersion paint. | Request Sample |
| NUOSPERSE® FA 162 | Elementis | NUOSPERSE® FA 162 is an aliphatic alcohol ethoxylated phosphate ester wetting and dispersing agent for waterborne pigments in plasticizer and aqueous universal tinting aids. It is an alternative for alkylphenol ethoxylated phosphate ester wetting and disp...view more NUOSPERSE® FA 162 is an aliphatic alcohol ethoxylated phosphate ester wetting and dispersing agent for waterborne pigments in plasticizer and aqueous universal tinting aids. It is an alternative for alkylphenol ethoxylated phosphate ester wetting and dispersing agents. view less | Request Sample |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 is a highly concentrated liquid pigment wetting dispersing agent for application in organic solventborne/aqueous systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for waterborne carbon black, for ...view more NUOSPERSE® FA 196 is a highly concentrated liquid pigment wetting dispersing agent for application in organic solventborne/aqueous systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for waterborne carbon black, for thermoplastic acrylic systems and as an compatibilizer to improve the action of universal tinting pastes in basic alkyd paints. view less | Request Sample |
| NUOSPERSE® FA 601 | Elementis | NUOSPERSE® FA 601 is a liquid wetting and dispersing solvent which has been especially formulated for use in organic solvent based paint systems. NUOSPERSE® FA 601 is effective for both organic and inorganic pigments. Properties such as opacity, gloss, co...view more NUOSPERSE® FA 601 is a liquid wetting and dispersing solvent which has been especially formulated for use in organic solvent based paint systems. NUOSPERSE® FA 601 is effective for both organic and inorganic pigments. Properties such as opacity, gloss, colour strength and brightness can be considerably improved at lower cost. view less | Request Sample |
| NUOSPERSE® FA 620 | Elementis | NUOSPERSE® FA 620 is a wetting and dispersing agent for the manufacture of highly concentrated, low viscosity waterborne and aqueous pigment dispersions. | Request Sample |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 is a solvent liquid corrosion inhibitor for non-aqueous/solventborne systems. NUOSPERSE® FK 329 is also recommended as a cationic pigment dispersing agent. | Request Sample |
| NUOSPERSE® FN 1566 | Elementis | NUOSPERSE® FN 1566 is an aqueous nonyl phenol ethoxylate dispersing and wetting agent and has particular application as a wetting agent and compatibilizer for pigments in waterborne coatings. | Request Sample |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic aqueous pigment wetting and dispersing agent primarily for use in waterborne coating formulations. NUOSPERSE® FN 211 is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. NUOSPERSE® FN 211 is...view more NUOSPERSE® FN 211 is a nonionic aqueous pigment wetting and dispersing agent primarily for use in waterborne coating formulations. NUOSPERSE® FN 211 is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. NUOSPERSE® FN 211 is labeling-free in the EU. view less | Request Sample |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the pai...view more NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the paint industry as pigment wetting agents, emulsifiers and stabilizers. view less | Request Sample |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 is an alkylphenol-free, nonionic wetting and dispersing agent and emulsifier. It contains only water as its volatile component and therefore may be classified as a VOC compliant compound. NUOSPERSE® FN 265 is an excellent candidate to s...view more NUOSPERSE® FN 265 is an alkylphenol-free, nonionic wetting and dispersing agent and emulsifier. It contains only water as its volatile component and therefore may be classified as a VOC compliant compound. NUOSPERSE® FN 265 is an excellent candidate to substitute NP-10E in waterborne paints, pigment dispersions and most aqueous emulsions and dispersions. view less | Request Sample |
| NUOSPERSE® FN 267 | Elementis | NUOSPERSE® FN 267 is a unique, aqueous labeling-free nonionic wetting and dispersing agent and emulsifier for aqueous paint and coating systems. | Request Sample |
| NUOSPERSE® FN 270 | Elementis | NUOSPERSE® FN 270 is a universal aqueous pigment wetting and dispersing agent for a wide variety of waterborne latex paints. It provides the wetting and dispersing properties of traditional APEO-containing wetting and dispersing agents but with much easie...view more NUOSPERSE® FN 270 is a universal aqueous pigment wetting and dispersing agent for a wide variety of waterborne latex paints. It provides the wetting and dispersing properties of traditional APEO-containing wetting and dispersing agents but with much easier handling and without the disadvantages of regulatory labeling. It shows superb storage stability, both as a product itself and when used in a paint. view less | Request Sample |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic aqueous polymeric dispersing and wetting agent for use in waterborne coating and ink formulations and pigment pastes. NUOSPERSE® FX 365 shows outstanding pigment wetting and stabilizing properties. | Request Sample |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, aqueous polymeric pigment dispersing and wetting agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | Request Sample |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 is a highly effective aqueous pigment dispersing and wetting agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polym...view more NUOSPERSE® FX 600 is a highly effective aqueous pigment dispersing and wetting agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of organic solvents. view less | Request Sample |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even af...view more NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even after extended storage of the coating system. view less | Request Sample |
| NUOSPERSE® FX 609 | Elementis | NUOSPERSE® FX 609 is a pigment dispersing and wetting agent designed for use in filler/pigment concentrates. It ensures extremely stable pigment dispersions for use in aqueous and waterborne systems. | Request Sample |
| NUOSPERSE® FX 610 | Elementis | NUOSPERSE® FX 610 is a new highly effective aqueous pigment dispersing agent to apply primarily in waterborne architectural coatings, pigment pastes, colorants and printing inks. The product is a liquid, multi-functional polymer and is VOC-free. It is rec...view more NUOSPERSE® FX 610 is a new highly effective aqueous pigment dispersing agent to apply primarily in waterborne architectural coatings, pigment pastes, colorants and printing inks. The product is a liquid, multi-functional polymer and is VOC-free. It is recommended in a wide variety of binders for decorative as well as industrial applications. It is the choice for waterborne alkyd formulations. view less | Request Sample |
| NUOSPERSE® FX 7500W | Elementis | NUOSPERSE® FX 7500W is a wetting and dispersing agent for waterborne paints and aqueous inks. It offers an excellent viscosity reducing effect, while improving color strength of organic and inorganic pigments. | Request Sample |
| NUOSPERSE® FX 9086 | Elementis | NUOSPERSE® FX 9086 is a pigment dispersing agent is designed for use in pigment pastes and provides extremely stable pigment dispersions for application in a wide range of solventborne coatings and inks. | Request Sample |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 is an environmentally friendly aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full color development and maximum production output. This additive stabilizes the finished dispersion to prev...view more NUOSPERSE® W-30 is an environmentally friendly aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full color development and maximum production output. This additive stabilizes the finished dispersion to prevent re-flocculation and viscosity drift. NUOSPERSE W-30 is compatible with most waterborne coatings vehicles and can be used in decorative paints, industrial coatings and maintenance finishes, automotive coatings. view less | Request Sample |
| NUOSPERSE® W-33 | Elementis | NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the f...view more NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent reflocculation and viscosity drift. NUOSPERSE® W-33 is low VOC and free of Alkylphenolethoxylates. view less | Request Sample |
| NUOSPERSE® W-39 | Elementis | NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments...view more NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. view less | Request Sample |
| NUOSPERSE® W-44 | Elementis | NUOSPERSE® W-44 is a multifunctional aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full colour development and maximum production output. This additive is suitable in waterborne paint and coating systems,...view more NUOSPERSE® W-44 is a multifunctional aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full colour development and maximum production output. This additive is suitable in waterborne paint and coating systems, and stabilizing the finished dispersion to prevent reflocculation and viscosity drift. NUOSPERSE® W-44 has been specially designed for low VOC architectural colorants, which can be used in both waterborne and solventborne paints. view less | Request Sample |
| Resiflow CP 77 | Worlée-Chemie G.m.b.H. | Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow ...view more Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow CP 77 can also be used in powder clear coats as the transparency is barely influenced. The usual surface defects such as orange peel effect, pinholes, craters and other imperfections can be eliminated by incorporating 0.5 -1.5% of Resiflow CP 77. view less | |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed...view more Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed for solvent based, oven drying coatings. view less | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow FM 4-50 | Worlée-Chemie G.m.b.H. | Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. A...view more Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally, it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. Resiflow FM 4-50 is silicone free and thus does not negatively influence the intercoat adhesion and recoatability. view less | |
| Resiflow L-3075 | Worlée-Chemie G.m.b.H. | Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hyd...view more Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. This product is used to eliminate air entrapment, foam, orange peel, pinholes, craters and improve stain resistance characteristics. It can be used in polyesters, acrylics, alkyds, phenolics, epoxies, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...view more Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow P-65F | Worlée-Chemie G.m.b.H. | Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air e...view more Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters, and other surface defects. view less | |
| Resiflow PH-240 | Worlée-Chemie G.m.b.H. | Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for pr...view more Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for primid and polyurethane, powder coatings, especially polyurethane clear coats. This product is used in epoxy, hybrid-, polyester-, polyurethanes and other powder coatings. view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 5 | Worlée-Chemie G.m.b.H. | Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and...view more Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and injection molding compositions based on acrylic, epoxy, polyester and polyurethane resins. Resiflow PV 5 is also suitable for hybrid systems and polyester/glycoluril powder coatings. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade...view more Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade appears as a medium viscous liquid. Resiflow W 51 is suitable for solvent as well as for water based coatings and inks view less |
