| EE20 | IBA Kimya San. ve Tic. A.S. | EE20 is a thermosetting epoxy-based powder that provides chemical resistance, good flow-out, and high gloss value in decorative and protective coatings. This product is used for interior applications and is suitable for most indoor environments. | |
| EE34 | IBA Kimya San. ve Tic. A.S. | EE34 is a pure epoxy-based thermosetting powder that provides a very low gloss, smooth and hard cured film. This product is abrasion and scratch resistant, and is specially formulated for blackboards, allowing for smoother writing, improved erasability an...view more EE34 is a pure epoxy-based thermosetting powder that provides a very low gloss, smooth and hard cured film. This product is abrasion and scratch resistant, and is specially formulated for blackboards, allowing for smoother writing, improved erasability and enhanced visibility. view less | |
| FF55 | IBA Kimya San. ve Tic. A.S. | FF55 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for use in most indoor environments. It has good chemical resistance to detergents and solvents while providing glossy dec...view more FF55 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for use in most indoor environments. It has good chemical resistance to detergents and solvents while providing glossy decorative coatings at low temperature curing. It contains no solvents and therefore exhibits a low impact to the environment. view less | |
| FF66 | IBA Kimya San. ve Tic. A.S. | FF66 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for most indoor environments. It provides glossy decorative coatings at low temperature curing. It has good flow-out and i...view more FF66 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for most indoor environments. It provides glossy decorative coatings at low temperature curing. It has good flow-out and is suitable for thin film applications. It contains no solvents and therefore exhibits a low impact to the environment. view less | |
| FF76 | IBA Kimya San. ve Tic. A.S. | FF76 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for most indoor environments. This special polymeric combination provides decorative coatings with excellent over bake res...view more FF76 is a thermosetting powder coating based on epoxy and polyester resins. It is designed for interior applications and is suitable for most indoor environments. This special polymeric combination provides decorative coatings with excellent over bake resistance. It has good flow-out and is suitable for thin film applications. It contains no solvents and therefore exhibits a low impact to the environment. view less | |
| PE20 | IBA Kimya San. ve Tic. A.S. | PE20 is a thermosetting powder coating based on polyester resins. It has been designed for exterior industrial applications with decorative and durability characteristics. It has very good UV and yellowing resistance.over time and temperature. It contains...view more PE20 is a thermosetting powder coating based on polyester resins. It has been designed for exterior industrial applications with decorative and durability characteristics. It has very good UV and yellowing resistance.over time and temperature. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over time and temperature. It can be used on a variety of substrates including aluminium and steel. view less | |
| PE21 | IBA Kimya San. ve Tic. A.S. | PE21 is a thermosetting powder coating based on polyester resins. It has been designed for exterior industrial applications with decorative and durability characteristics. It has very good UV and yellowing resistance.over time and temperature. It contains...view more PE21 is a thermosetting powder coating based on polyester resins. It has been designed for exterior industrial applications with decorative and durability characteristics. It has very good UV and yellowing resistance.over time and temperature. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over time and temperature. It can be used on a variety of substrates including aluminium and steel. view less | |
| PE22 | IBA Kimya San. ve Tic. A.S. | PE22 is a thermosetting matte powder coating based on polyester resins. It was designed for exterior applications requiring decorative and durability characteristics. It is particularly suitable for architectural applications where color and gloss retenti...view more PE22 is a thermosetting matte powder coating based on polyester resins. It was designed for exterior applications requiring decorative and durability characteristics. It is particularly suitable for architectural applications where color and gloss retention are critical. It has very good UV and yellowing resistance over time and temperature. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over time and temperature. It can be used on a variety of substrates including aluminium and steel. view less | |
| PE38 | IBA Kimya San. ve Tic. A.S. | PE38 is a thermosetting TGIC free powder coating based on polyester resins. It was designed for interior and exterior industrial applications, providing decorative and durability characteristics. It has very good UV and heat resistance and resists yellow...view more PE38 is a thermosetting TGIC free powder coating based on polyester resins. It was designed for interior and exterior industrial applications, providing decorative and durability characteristics. It has very good UV and heat resistance and resists yellowing over time and temperature. It provides thermal resistance up to 120 °C / 248 °F under continuous service conditions. It contains no solvents and therefore exhibits a low impact to the environment. It maintains good yellowing resistance over time and temperature. It can be used on a variety of substrates including aluminium and steel. view less | |
| PU44 | IBA Kimya San. ve Tic. A.S. | PU44 is an exterior durable polyurethane based powder coating. It is intended as a base coat for sublimation decoration techniques. It has excellent flow-out, allowing wood patterns to be created by applying a top coat through a sublimation decoration tec...view more PU44 is an exterior durable polyurethane based powder coating. It is intended as a base coat for sublimation decoration techniques. It has excellent flow-out, allowing wood patterns to be created by applying a top coat through a sublimation decoration technique. It contains no solvents and therefore exhibits a low impact to the environment. It can be used on a variety of substrates including aluminium and steel. view less | |
| WorléeCryl® 8025 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8025 is an aqueous acrylic solution, free of emulsifier, that can be used for the production of flexographic and gravure inks and overprint varnishes. The use of W´Cryl 8025 is specially recommended for systems in which combustible solvents sh...view more WorléeCryl® 8025 is an aqueous acrylic solution, free of emulsifier, that can be used for the production of flexographic and gravure inks and overprint varnishes. The use of W´Cryl 8025 is specially recommended for systems in which combustible solvents should be eliminated. It is a ready-to-use solution. view less | |
| WorléeDur D 46 | Worlée-Chemie G.m.b.H. | WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and mela...view more WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and melamine formaldehyde resins. W´Dur D 46 is an excellent binder for quick-drying primers and top-coats with very good adhesion and chemical resistance. Zinc-rich primers based on W´Dur D 46 have very good stability and anticorrosive properties. view less | |
| WorléeKyd C 640 | Worlée-Chemie G.m.b.H. | WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of sho...view more WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of short and medium oil length drying and non-drying alkyds. W´Kyd C 640 is particularly suitable for the manufacture of high quality nitrocellulose finishes for wood and paper. The solvent release is very fast. view less | |
| WorléePol® 230 | Worlée-Chemie G.m.b.H. | WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical we...view more WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. Adding W´Pol 230 to systems based on W´Pol 165 results in better mechanical and chemical resistance. view less | |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...view more WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. view less | |
| WorléeSin MS 235 | Worlée-Chemie G.m.b.H. | WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cel...view more WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cellulose and with softeners, inks and varnishes based on W´Sin MS 235 exhibit a high gloss level and excellent transparency. Good pigment grinding is also observed. view less | |
| WorléeSin MS 265 | Worlée-Chemie G.m.b.H. | WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in fle...view more WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in flexo and gravure inks and overprint lacquers. view less |
