| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...view more EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. view less | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...view more EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. view less | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...view more EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. view less | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...view more EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. view less | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...view more EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. view less | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...view more EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...view more EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...view more EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. view less | |
| EMULTROL DFM OLM-12 | Concentrol, S.A., Productos | EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...view more EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OLM-14 | Concentrol, S.A., Productos | EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...view more EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. view less | |
| EMULTROL DFM OLM-15 | Concentrol, S.A., Productos | EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....view more EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. view less | |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...view more EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM OLM-18 | Concentrol, S.A., Productos | EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...view more EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM OLM-20 | Concentrol, S.A., Productos | EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...view more EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. view less | |
| EMULTROL DFM OLM-22 | Concentrol, S.A., Productos | EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...view more EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. view less | |
| EMULTROL DFM OLV-52 | Concentrol, S.A., Productos | EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...view more EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. view less | |
| EMULTROL DFM OLV-54 | Concentrol, S.A., Productos | EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...view more EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. view less | |
| EMULTROL DFM P-20 | Concentrol, S.A., Productos | EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...view more EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. view less | |
| EMULTROL DFM PG-100 FR | Concentrol, S.A., Productos | EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems. | |
| EMULTROL DFM PG-100 PK | Concentrol, S.A., Productos | EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...view more EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. view less | |
| EMULTROL DFM PGM-100 CB | Concentrol, S.A., Productos | EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...view more EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. view less | |
| EMULTROL DFM PGM-60 CV | Concentrol, S.A., Productos | EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...view more EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. view less | |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemic...view more Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemical resistance properties. Gloss control is achieved by varying the amount of Epomatt G-151 in the formulation. Smooth matt finishes with 60° gloss values ranging from 2% to 70% can be achieved with Epomatt G-151. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| ORDISOL SWT-01 | Concentrol, S.A., Productos | ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. | |
| ORDISOL SWT-01 R | Concentrol, S.A., Productos | ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...view more ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-03 | Concentrol, S.A., Productos | ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...view more ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. view less | |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...view more ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. view less | |
| ORDISOL SWT-06 | Concentrol, S.A., Productos | ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance. | |
| ORDISOL SWT-07 | Concentrol, S.A., Productos | ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...view more ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. view less | |
| ORDISOL SWT-10 | Concentrol, S.A., Productos | ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...view more ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. view less | |
| ORDISOL SWT-11 | Concentrol, S.A., Productos | ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...view more ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-13 | Concentrol, S.A., Productos | ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...view more ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. view less | |
| ORDISOL SWT-13 XI | Concentrol, S.A., Productos | ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...view more ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. view less | |
| ORDISOL SWT-13-100 | Concentrol, S.A., Productos | ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required. | |
| ORDISOL SWT-14 | Concentrol, S.A., Productos | ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-15 | Concentrol, S.A., Productos | ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-15 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-16 | Concentrol, S.A., Productos | ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...view more ORDISOL SWT-16 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. view less | |
| ORDISOL SWT-17 | Concentrol, S.A., Productos | ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface de...view more ORDISOL SWT-17 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-17 also inhibits the formation of surface defects, and provides wear and scratch resistance. view less | |
| ORDISOL SWT-18 | Concentrol, S.A., Productos | ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suit...view more ORDISOL SWT-18 is a silicone surfactant for application in aqueous systems, printing inks and overprint sheets. It offers a high reduction of the surface tension, improving the wetting without increasing the slip. Due to its chemical structure, it is suitable in aqueous systems containing a small amount of organic co-solvent. view less | |
| ORDISOL SWT-24 | Concentrol, S.A., Productos | ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-...view more ORDISOL SWT-24 is a silicone surfactant for application in aqueous and non-aqueous systems (solvent base) with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in all types of systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. view less | |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking pro...view more ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. view less | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight...view more ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. view less | |
| ORDISOL SWT-400 | Concentrol, S.A., Productos | ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide r...view more ORDISOL SWT-400 is a silicone additive that imparts anti-blocking properties, abrasion resistance, lubricity and perfect compatibility with aqueous, alcoholic or solvent based systems. Being a non-ionic additive, it has perfect compatibility with a wide range of organic surfactants. Perfectly compatible with polyurethane coatings in which it offers anti-blocking properties and improves abrasion resistance. view less | |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and wa...view more ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. view less | |
| ORDISOL SWT-57 | Concentrol, S.A., Productos | ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...view more ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. view less | |
| Resiflow CP 77 | Worlée-Chemie G.m.b.H. | Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow ...view more Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow CP 77 can also be used in powder clear coats as the transparency is barely influenced. The usual surface defects such as orange peel effect, pinholes, craters and other imperfections can be eliminated by incorporating 0.5 -1.5% of Resiflow CP 77. view less | |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed...view more Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed for solvent based, oven drying coatings. view less | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow FM 4-50 | Worlée-Chemie G.m.b.H. | Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. A...view more Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally, it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. Resiflow FM 4-50 is silicone free and thus does not negatively influence the intercoat adhesion and recoatability. view less | |
| Resiflow L-3075 | Worlée-Chemie G.m.b.H. | Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hyd...view more Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. This product is used to eliminate air entrapment, foam, orange peel, pinholes, craters and improve stain resistance characteristics. It can be used in polyesters, acrylics, alkyds, phenolics, epoxies, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...view more Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow P-65F | Worlée-Chemie G.m.b.H. | Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air e...view more Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters, and other surface defects. view less | |
| Resiflow PH-240 | Worlée-Chemie G.m.b.H. | Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for pr...view more Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for primid and polyurethane, powder coatings, especially polyurethane clear coats. This product is used in epoxy, hybrid-, polyester-, polyurethanes and other powder coatings. view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 5 | Worlée-Chemie G.m.b.H. | Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and...view more Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and injection molding compositions based on acrylic, epoxy, polyester and polyurethane resins. Resiflow PV 5 is also suitable for hybrid systems and polyester/glycoluril powder coatings. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade...view more Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade appears as a medium viscous liquid. Resiflow W 51 is suitable for solvent as well as for water based coatings and inks view less | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carbo...view more Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralization with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...view more Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...view more WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. view less | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...view more WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. view less | |
| WorléeAdd 101 P | Worlée-Chemie G.m.b.H. | WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, ...view more WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as plasticizer. W´Add 101 is used to improve levelling and to avoid surface imperfections as orange peel effect, cratering, Benard's cells etc.. This product is also UV-stable. view less | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...view more WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. view less | |
| WorléeAdd 1500 | Worlée-Chemie G.m.b.H. | WorléeAdd 1500 is a dimethylsiloxane additive for use in gravure inks, offset printing inks, and overprint inks. It is a viscous liquid water white/slightly yellowish substance. This product is soluble in mineral oil, aliphatic and aromatic hydrocarbons. | |
| WorléeAdd 18 | Worlée-Chemie G.m.b.H. | WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flow...view more WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a fine particle size silica carrier. view less | |
| WorléeAdd 2000 | Worlée-Chemie G.m.b.H. | WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears...view more WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears as a clear to slightly turbid, yellowish low viscous liquid. view less | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...view more WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 317 | Worlée-Chemie G.m.b.H. | WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum sur...view more WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum surface properties to decorative paints, stoving enamels and metallic car paints. W´Add 317 improves the mar resistance and surface wetting of solvent based furniture lacquers of different composition. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less |
