| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| Texicryl® 13-809 | Scott Bader | Texicryl® 13-809 is a hard emulsion for high gloss, fast drying coatings, OPV’s and inks. Can be used as deblocking modifier. | |
| Texicryl® 13-812 | Scott Bader | Texicryl® 13-812 is a high efficiency alkali soluble binder for flexographic printing of cartons and paper sacks. | |
| Texicryl® 13-813 | Scott Bader | Texicryl® 13-813 is a low odour, soft polymer with superior gloss and holdout for use in verprint varnishes. Heat sealable. | |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...view more Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. view less | |
| WorléeCryl® 8025 | Worlée-Chemie G.m.b.H. | WorléeCryl® 8025 is an aqueous acrylic solution, free of emulsifier, that can be used for the production of flexographic and gravure inks and overprint varnishes. The use of W´Cryl 8025 is specially recommended for systems in which combustible solvents sh...view more WorléeCryl® 8025 is an aqueous acrylic solution, free of emulsifier, that can be used for the production of flexographic and gravure inks and overprint varnishes. The use of W´Cryl 8025 is specially recommended for systems in which combustible solvents should be eliminated. It is a ready-to-use solution. view less | |
| WorléeDur D 46 | Worlée-Chemie G.m.b.H. | WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and mela...view more WorléeDur D 46 is a short oil epoxy ester based on conjugated drying fatty acids. It is used in air-drying and stoving finishes with outstanding adhesion, rapid drying and good chemical resistance. W´Dur D 46 is compatible with unplasticized urea and melamine formaldehyde resins. W´Dur D 46 is an excellent binder for quick-drying primers and top-coats with very good adhesion and chemical resistance. Zinc-rich primers based on W´Dur D 46 have very good stability and anticorrosive properties. view less | |
| WorléeKyd C 640 | Worlée-Chemie G.m.b.H. | WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of sho...view more WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of short and medium oil length drying and non-drying alkyds. W´Kyd C 640 is particularly suitable for the manufacture of high quality nitrocellulose finishes for wood and paper. The solvent release is very fast. view less | |
| WorléePol® 230 | Worlée-Chemie G.m.b.H. | WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical we...view more WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. Adding W´Pol 230 to systems based on W´Pol 165 results in better mechanical and chemical resistance. view less | |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...view more WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. view less | |
| WorléeSin MS 235 | Worlée-Chemie G.m.b.H. | WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cel...view more WorléeSin MS 235 is an alcohol soluble maleic resin that is water thinnable after neutralisation. It is suitable for the production of flexographic and gravure inks for paper, aluminium and plastic films. Due to its compatibility with nitro- and ethyl cellulose and with softeners, inks and varnishes based on W´Sin MS 235 exhibit a high gloss level and excellent transparency. Good pigment grinding is also observed. view less | |
| WorléeSin MS 265 | Worlée-Chemie G.m.b.H. | WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in fle...view more WorléeSin MS 265 is a hard, spirit soluble maleic resin which becomes water thinnable after neutralization. It is used to formulate water thinnable flexo printing inks with very fast drying and increased abrasion resistance. This product is applied in flexo and gravure inks and overprint lacquers. view less |
