| Atrepol P20 | Atcoat GmbH | Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60...view more Atrepol P20 is a saturated poly ester color stable resin with extremely low viscosity for impregnations, printing inks, stains, lacquers, reactive, wood treatment oils, and is environmentally friendly. Atrepol P20 has a solid of 100% and a viscosity of 60 to 80 sec. view less | |
| Atrepol P30 | Atcoat GmbH | Atrepol P30 is a saturated poly ester resin for wood treatment oils, impregnation, penetration, and is environmental friendly, has extremely low viscosity, and is color stable. Atrepol P30 has a solid of 100% and a viscosity of 20 to 40 sec. | |
| Atrepol P40 | Atcoat GmbH | Atrepol P40 is a saturated poly ester resin for wood treatment oils, impregnation, penetration, and is environmental friendly, has extremely low viscosity, and is color stable. Atrepol P40 has a solid of 100% and a viscosity of 40 to 70 sec. | |
| Atrepur 288/60 D4 | Atcoat GmbH | Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 288/60 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 288/60 D4 has an oil length of 60, a solid of 60%, and a viscosity of 4000 to 6000 mPas. view less | |
| Atrepur 340/54 D4 | Atcoat GmbH | Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels,...view more Atrepur 340/54 D4 is a urethane alkyd resin, consisting of soya and aliphatic naphtha, suitable for fast drying paints with good chemical, water, and abrasion resistance, and is also recommended for high quality wood stains, air drying industrial enamels, and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 340/54 D4 has an oil length of 60, a solid of 54%, and a viscosity of 8000 to 12000 mPas. view less | |
| Atrepur 939/60 K6 | Atcoat GmbH | Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natura...view more Atrepur 939/60 K6 is a urethane alkyd resin, consisting of vegetable oil and white spirit, suitable for high quality industrial and decorative paints with good chemical and water resistance, and abrasion resistance. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur 939/60 K6 has an oil length of 60, a solid of 60%, and a viscosity of 5.5 to 7.5 Pas. view less | |
| Atrepur HS 500/70 D4 | Atcoat GmbH | Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 500/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 500/70 D4 has an oil length of 57, a solid of 70%, and a viscosity of 9000 to 12000 mPas. view less | |
| Atrepur HS 550/70 D4 | Atcoat GmbH | Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 550/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 550/70 D4 has an oil length of 58, a solid of 70%, and a viscosity of 13000 to 17000 mPas. view less | |
| Atrepur HS 600/70 IPL | Atcoat GmbH | Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and...view more Atrepur HS 600/70 IPL is a urethane alkyd resin, consisting of vegetable oil and isoparaffin, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for HS parquet paints, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 600/70 IPL has an oil length of 63, a solid of 70%, and a viscosity of 5000 to 9000 mPas. view less | |
| Atrepur HS 700/70 D4 | Atcoat GmbH | Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 700/70 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 700/70 D4 has an oil length of 60, a solid of 70%, and a viscosity of 9000 to 13000 mPas. view less | |
| Atrepur HS 800/80 D4 | Atcoat GmbH | Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial e...view more Atrepur HS 800/80 D4 is a urethane alkyd resin, consisting of vegetable oil and aliphatic naphtha, with high abrasion resistance, good chemical and water resistance, low VOC content, fast drying, and is recommended for high quality air drying industrial enamels, decorative paints, and lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atrepur HS 800/80 D4 has an oil length of 60, a solid of 80%, and a viscosity of 4000 to 8000 mPas. view less | |
| Atresal H 100/70 D6 | Atcoat GmbH | Atresal H 100/70 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for exterior and interior use and premium wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, an...view more Atresal H 100/70 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for exterior and interior use and premium wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal H 100/70 D6 has an oil length of 70, a solid of 70%, and a viscosity of 100 to 140 sec. view less | |
| Atresal H 101/70 D6 | Atcoat GmbH | Atresal H 101/70 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for exterior and interior use and premium wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, an...view more Atresal H 101/70 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for exterior and interior use and premium wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal H 101/70 D6 has an oil length of 70, a solid of 70%, and a viscosity of 100 to 140 sec. view less | |
| Atresal K410/75 BA | Atcoat GmbH | Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty aci...view more Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K410/75 BA has an oil length of 41 a solid of 75%, and a viscosity of 30 to 45 sec. view less | |
| Atresal L1560/60 D6 | Atcoat GmbH | Atresal L1560/60 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for varnishing and impregnating of porous substrates and wood. Atcoat alkyd resins are based on natural raw materials like fatty acids, p...view more Atresal L1560/60 D6 is a long oil alkyd resin, consisting of high quality fatty acid and aliphatic naphtha, suitable for varnishing and impregnating of porous substrates and wood. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1560/60 D6 has an oil length of 65, a solid of 60%, and a viscosity of 100 to 140 sec. view less | |
| Atresal L1560/60 K3 | Atcoat GmbH | Atresal L1560/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for varnishing and impregnating of porous substrates and wood with good drying, humidity controlling, and UV protection, and permeable for wate...view more Atresal L1560/60 K3 is a long oil alkyd resin, consisting of high quality fatty acid and white spirit, suitable for varnishing and impregnating of porous substrates and wood with good drying, humidity controlling, and UV protection, and permeable for water vapor. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L1560/60 K3 has an oil length of 65, a solid of 60%, and a viscosity of 50 to 80 sec. view less | |
| Atresal L97/60 D6 | Atcoat GmbH | Atresal L97/60 D6 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, suitable for the production of construction and house wood stains and paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, ...view more Atresal L97/60 D6 is a long oil alkyd resin, consisting of soya, linseed, and aliphatic naphtha, suitable for the production of construction and house wood stains and paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal L97/60 D6 has an oil length of 65, a solid of 60%, and a viscosity of 20 to 28 dPas. view less | |
| Atresal LO 07 | Atcoat GmbH | Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat...view more Atresal LO 07 is a long oil alkyd resin, consisting of talloil fatty acid, suitable for paints with good pigment compatibility, good weather resistance, good flexibility, good adhesion, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 07 has an oil length of 82, a solid of 100%, and a viscosity of 3000 to 5000 mPas. view less | |
| Atresal LO 08 | Atcoat GmbH | Atresal LO 08 is a long oil alkyd resin, consisting of soya, suitable for paints with good pigment compatibility, flexibility, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty...view more Atresal LO 08 is a long oil alkyd resin, consisting of soya, suitable for paints with good pigment compatibility, flexibility, and is also recommended for wood stains and decorative paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 08 has an oil length of 82, a solid of 100%, and a viscosity of 1200 to 2500 mPas. view less | |
| Atresal LO 135 | Atcoat GmbH | Atresal LO 135 is a long oil alkyd resin, consisting of soya, suitable for paints with good weather resistance, adhesion, and is recommended for wood stains and decorative paints with low yellowing, and for pigment pastes. Atcoat alkyd resins are based on...view more Atresal LO 135 is a long oil alkyd resin, consisting of soya, suitable for paints with good weather resistance, adhesion, and is recommended for wood stains and decorative paints with low yellowing, and for pigment pastes. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 135 has an oil length of 65, a solid of 100%, and a viscosity of 12 to 20 Pas. view less | |
| Atresal LO 21 | Atcoat GmbH | Atresal LO 21 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for natural wood lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 21 has an oil length of 80, a solid ...view more Atresal LO 21 is a long oil alkyd resin, consisting of high quality fatty acid, suitable for natural wood lacquers. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO 21 has an oil length of 80, a solid of 100%, and a viscosity of 1200 to 2500 mPas. view less | |
| Atresal LO490/85 TPnB | Atcoat GmbH | Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low...view more Atresal LO490/85 is a low viscous long oil alkyd resin, consisting of high quality fatty acid and dowanol TPnB, suitable for the production of paints with good weather resistance, good flexibility, good adhesion, and is recommended for pigment pastes, low yellowing decorative paints, and wood stains. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal LO490/85 has an oil length of 65, a solid of 85%, and a viscosity of 1500 to 3000 mPas. view less | |
| Atresal MO 511/50 K6 | Atcoat GmbH | Atresal MO 511/50 K6 is medium oil alkyd resin, consisting of tung, linseed, and white spirit, suitable for indoor use and wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal MO 511/50 K6 has a...view more Atresal MO 511/50 K6 is medium oil alkyd resin, consisting of tung, linseed, and white spirit, suitable for indoor use and wood lacquer. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal MO 511/50 K6 has an oil length of 49, a solid of 50%, and a viscosity of 1000 to 2500 mPas. view less | |
| Atresoil BL | Atcoat GmbH | Atresoil BL is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, and increase weather resistance, which is suitable for wood treatments, natural paints, and painting materials (especially fi...view more Atresoil BL is a stand oil and boiled oil, consisting of linseed oil, with good pigment wetting, dehydrate with luminous surface, and increase weather resistance, which is suitable for wood treatments, natural paints, and painting materials (especially final coat). Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresoil BL has an oil length of 100, a solid of 100% and a viscosity of 50 to 100. view less | |
| Atresol LO 177/50 W | Atcoat GmbH | Atresol LO 177/50 W is an alkyd emulsion, consisting of linseed, suitable for stains, paints, and primers, which has exterior durability, good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, ...view more Atresol LO 177/50 W is an alkyd emulsion, consisting of linseed, suitable for stains, paints, and primers, which has exterior durability, good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol LO 177/50 W has an oil length of 76, a solid of 50% and a viscosity of 10 to 100 mPas. view less | |
| Atresol LO 70/60 W | Atcoat GmbH | Atresol LO 70/60 W is an alkyd emulsion, consisting of talloil fatty acid, suitable for industrial wood primers and decorative paints, which have good penetration properties, low yellowing, good flexibility, good weathering, and is also suitable for water...view more Atresol LO 70/60 W is an alkyd emulsion, consisting of talloil fatty acid, suitable for industrial wood primers and decorative paints, which have good penetration properties, low yellowing, good flexibility, good weathering, and is also suitable for water-based pigment preparations with no alkyl phenol ethoxylates, no amines, and no organic solvent. Atresol LO 70/60 W has an oil length of 82, a solid of 60% and a viscosity of 100 to 300 mPas. view less | |
| Atresol LO 80/50 W | Atcoat GmbH | Atresol LO 80/50 W is an alkyd emulsion, consisting of talloil, suitable for stains, paints, and primers, which has good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol...view more Atresol LO 80/50 W is an alkyd emulsion, consisting of talloil, suitable for stains, paints, and primers, which has good adhesion to difficult substrates, good penetration properties, no organic solvent, no alkyl phenol ethoxylates, and no amines. Atresol LO 80/50 W has an oil length of 81, a solid of 50% and a viscosity of 40 to 150 mPas. view less | |
| Atresol LO 82/60 W | Atcoat GmbH | Atresol LO 82/60 W is an alkyd emulsion, consisting of soya and linseed, suitable for industrial wood primers and decorative paints, which has good rapid penetration properties, no alkyl phenol ethoxylates, little raising of wood grain, no amines, and no ...view more Atresol LO 82/60 W is an alkyd emulsion, consisting of soya and linseed, suitable for industrial wood primers and decorative paints, which has good rapid penetration properties, no alkyl phenol ethoxylates, little raising of wood grain, no amines, and no organic solvent. Atresol LO 82/60 W has an oil length of 83, a solid of 60% and a viscosity of 100 to 300 mPas. view less | |
| Atresol LO27/60W | Atcoat GmbH | Atresol LO27/60W is an alkyd emulsion, consisting of high quality fatty acid, suitable for top coats, wood stains, and coatings, based on the 100% renewable raw materials. Atresol LO27/60W has an oil length of 80, a solid of 60% and a viscosity of 1200 to...view more Atresol LO27/60W is an alkyd emulsion, consisting of high quality fatty acid, suitable for top coats, wood stains, and coatings, based on the 100% renewable raw materials. Atresol LO27/60W has an oil length of 80, a solid of 60% and a viscosity of 1200 to 3000 mPas. view less | |
| Atresol MO 65/50 W | Atcoat GmbH | Atresol MO 65/50 W is an alkyd emulsion, consisting of high quality fatty acid, suitable for wood coatings and decorative paints, which have no alkyl phenol ethoxylates, low yellowing, improved drying properties, no amines, good gloss retention, and no or...view more Atresol MO 65/50 W is an alkyd emulsion, consisting of high quality fatty acid, suitable for wood coatings and decorative paints, which have no alkyl phenol ethoxylates, low yellowing, improved drying properties, no amines, good gloss retention, and no organic solvent. Atresol MO 65/50 W has an oil length of 48, a solid of 50% and a viscosity of 10 to 150 mPas. view less | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...view more WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. view less | |
| WorléeCryl® A 1320 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1320 is an acrylic resin which can be crosslinked with polyisocyanate. It is used for high quality wood and furniture lacquers. This product exhibits good initial drying. Also, in top coats a brilliant haze-free gloss will be provided. | |
| WorléeKyd C 640 | Worlée-Chemie G.m.b.H. | WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of sho...view more WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of short and medium oil length drying and non-drying alkyds. W´Kyd C 640 is particularly suitable for the manufacture of high quality nitrocellulose finishes for wood and paper. The solvent release is very fast. view less | |
| WorléeKyd RS 2174 | Worlée-Chemie G.m.b.H. | WorléeKyd RS 2174 is a combination resin for other alkyd resins. It improves epentration, decreases viscosity, and provides VOC reduction. This product is applied as a sole binder for wood care and coating products. | |
| WorléeKyd S 5703 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majori...view more WorléeKyd S 5703 (55% In Dearomatized HC 160-200) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. W´Kyd S 5703 is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 5703 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ...view more WorléeKyd S 5703 (55% In White Spirit 145-195) is an aliphatic urethane modified long oil alkyd for the manufacture of light colored and yellowing resistant wood varnishes, parquet sealers, and house lacquers. This grade has a non volatile content of 55% ± 1. Varnishes based on W´Kyd S 5703 are fast drying with a high degree of hardness and good gloss. view less | |
| WorléeKyd S 6003 (51% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile...view more WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 51% ± 1. W´Kyd S 6003 is compatible with the majority of medium and long oil types air-drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd SH 380 (70% In Butyl Acetate) | Worlée-Chemie G.m.b.H. | WorléeKyd SH 380 (70% In Butyl Acetate) is a short oil alkyd for use in conjunction with amino resins in very rapid curing acid catalyzed finishes. This grade has a non volatile content of 70% ± 1. W´Kyd SH 380 is intended for use in conjunction with unmo...view more WorléeKyd SH 380 (70% In Butyl Acetate) is a short oil alkyd for use in conjunction with amino resins in very rapid curing acid catalyzed finishes. This grade has a non volatile content of 70% ± 1. W´Kyd SH 380 is intended for use in conjunction with unmodified urea formaldehyde resins in the ratio 65 : 35 or 70 : 30 (calculated on resin solids) for high quality, rapid curing acid catalyzed finishes with good elasticity and relatively long pot life. W´Kyd SH 380 is suitable both for acid catalyzed finishes to be cured at room temperature and for force drying finishes. view less | |
| WorléeKyd V 5241 U | Worlée-Chemie G.m.b.H. | WorléeKyd V 5241 U is a low viscosity oil modified polyurethane used for the production of high solid, more environmentally friendly paint systems. W´Kyd V 5241 U is compatible with most air drying medium and long oil alkyd resins. This product is particu...view more WorléeKyd V 5241 U is a low viscosity oil modified polyurethane used for the production of high solid, more environmentally friendly paint systems. W´Kyd V 5241 U is compatible with most air drying medium and long oil alkyd resins. This product is particularly suitable for the manufacturing of preservative impregnation for wood and wood preservative glazing paint. view less | |
| WorléeSol 31 A | Worlée-Chemie G.m.b.H. | WorléeSol 31 A is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. It can also be used for clear wood impregnation, pigmented and transparent stains. It shows extremely good penet...view more WorléeSol 31 A is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. It can also be used for clear wood impregnation, pigmented and transparent stains. It shows extremely good penetration into the wood, excellent durability, easy application, no nail head rusting, good chalk binding and long term elasticity. view less | |
| WorléeSol 31 C | Worlée-Chemie G.m.b.H. | WorléeSol 31 C is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 31 C is a unique resin for the manufacture of water thinnable clear wood impregnation, pigmented and trans...view more WorléeSol 31 C is a modified linseed oil polymer which is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 31 C is a unique resin for the manufacture of water thinnable clear wood impregnation, pigmented and transparent stains and wood preservatives. It shows extremely good penetration into the wood, excellent durability, easy application, no nailhead rusting, good chalk binding and long term elasticity. view less | |
| WorléeSol 37 | Worlée-Chemie G.m.b.H. | WorléeSol 37 is a modified linseed oil polymer. It is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 37 shows excellent penetration and outdoor durability on different woods as well as long term elasticity. The ...view more WorléeSol 37 is a modified linseed oil polymer. It is readily reducible with water for formulating exterior stains and wood preservatives. W´Sol 37 shows excellent penetration and outdoor durability on different woods as well as long term elasticity. The pH-value of wood preservatives based on W´Sol 37 should be between 8.2 - 8.5. view less | |
| WorléeSol E 530 W | Worlée-Chemie G.m.b.H. | WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically a...view more WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative drying, a cobalt drier is not necessary in many cases. Varnishes based on W´Sol E 530 W show good wood firing, good water and chemical resistance and high abrasion resistance. This grade has a non volatile content of 30% ± 1. view less | |
| WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with ...view more WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with excellent through drying and hardness even without the addition of a co-drier. W´Sol E 927 W also shows good compatibility with acrylic dispersions. view less | |
| WorléeSol NW 410 | Worlée-Chemie G.m.b.H. | WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The fo...view more WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The formulation of wood protection stains is also possible. The use of W´Sol NW 410 during the grinding process is not recommended. This grade has a non volatile content of 46% ± 2. view less | |
| WorléeSol NW 474 | Worlée-Chemie G.m.b.H. | WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is op...view more WorléeSol NW 474 is a long oil amine and co-solvent free alkyd emulsion. This grade has a non volatile content of 60% ± 2. W´Sol NW 474 is suitable for the manufacture of wood impregnations and -glazings. A further application field for W´Sol NW 474 is open time and body improvement of decorative and house paints based on W´Sol E 150 W by addition of 3 - 10 % on total formulation. view less | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings...view more WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings. After curing, the coating exhibits hardness, chemical and weather resistance. Application fields for W´Thix A 1420 are pigmented and colourless wood coating systems. In these coating formulations W´Thix A 1420 is used for adjusting the stability at vertical surfaces. view less | |
| WorléeThix L 7904 | Worlée-Chemie G.m.b.H. | WorléeThix L 7904 is a low viscous, thixotropic, long oil alkyd resin for fillers and putties and for modifying oil paints. It exhibits excellent weather resistance and permanent elasticity. The oil length for this grade is 79%. W´Thix L 7904 is compatibl...view more WorléeThix L 7904 is a low viscous, thixotropic, long oil alkyd resin for fillers and putties and for modifying oil paints. It exhibits excellent weather resistance and permanent elasticity. The oil length for this grade is 79%. W´Thix L 7904 is compatible with most airdrying medium and long oil alkyd resins. view less | |
| WorléeThix L 8050 | Worlée-Chemie G.m.b.H. | WorléeThix L 8050 is a thixotropic long oil alkyd resin based on linseed oil which is mostly used for wood glazings. The oil length for this grade is approx. 80%. | |
| WorléeThix S 6357 (40% In Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W...view more WorléeThix S 6357 (40% In Dearomatized HC 180-220) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. view less | |
| WorléeThix S 6455 | Worlée-Chemie G.m.b.H. | WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also comp...view more WorléeThix S 6455 is a thixotropic, long oil alkyd resin for the manufacture of thixotropic paint systems. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. W´Thix S 6455 is especially suitable for the manufacture of thixotropic primers, fillers, gloss and silk gloss paints as well as for wood glazings. view less | |
| WorléeThix SD 6051 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with...view more WorléeThix SD 6051 (55% In Dearomatized HC 160-200) is a thixotropic long oil alkyd resin used for the manufacture of primers, fillers, gloss paints, and silk gloss paints. This grade has a non volatile content of 50% ± 2. W´Thix S 6455 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. It is also used for wood glazings. view less | |
| WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 decreases sagging from vertical surfaces. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compat...view more WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less |
