| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| DEUREX® A 20 K | DEUREX AG | DEUREX® A 20 K consists of fine white granules of ethylene-bis-stearamide (EBS) wax that serves as an internal lubricant and release agent. The product has uses in the printing inks and paints and coatings industries. | |
| DEUREX® A 26 P | DEUREX AG | DEUREX® A 26 P is a slightly yellow powdered erucamide wax that has good antiblock and slip properties and can function as a lubricant. It is used in the printing inks industry. | |
| DEUREX® A 27 P | DEUREX AG | DEUREX® A 27 P is a slightly yellow powder composed of oleamide wax that has a number of useful functions including good slip and antiblock properties as well as being a release agent and lubricant. It has applications in the printing inks industry. | |
| DEUREX® E 08 | DEUREX AG | DEUREX® E 08 takes the form of fine white granules in a non-polar polyethylene wax that functions as a lubricant for non-polar pigment concentrates. A dispersing agent, it also has good matting and abrasion properties and has broad application in various ...view more DEUREX® E 08 takes the form of fine white granules in a non-polar polyethylene wax that functions as a lubricant for non-polar pigment concentrates. A dispersing agent, it also has good matting and abrasion properties and has broad application in various industries including uses in printing inks, paints and coatings and the modification of hotmelt adhesives and coating hotmelts. view less | |
| DEUREX® E 09 K | DEUREX AG | DEUREX® E 09 K takes the form of fine white granules in a hard, crystalline and low viscous polyethylene wax. The wax can be ground, while the viscosity of the hotmelts can be adjusted. In transparent hotmelt applications, about 25% of the FT wax can be s...view more DEUREX® E 09 K takes the form of fine white granules in a hard, crystalline and low viscous polyethylene wax. The wax can be ground, while the viscosity of the hotmelts can be adjusted. In transparent hotmelt applications, about 25% of the FT wax can be substituted, while in non-transparent applications, up to 50% can be substituted. The product is ideal for use in paints and coatings. view less | |
| DEUREX® E 10 K | DEUREX AG | DEUREX® E 10 K are fine white granules in a soft and flexible polyethylene wax which can be emulsified. Beneficial properties include the product acting as a dispersing agent, a release agent and a lubricant that is ideal for use as a coating additive and...view more DEUREX® E 10 K are fine white granules in a soft and flexible polyethylene wax which can be emulsified. Beneficial properties include the product acting as a dispersing agent, a release agent and a lubricant that is ideal for use as a coating additive and filler in rubber and cables. view less | |
| DEUREX® E 11 G | DEUREX AG | DEUREX® E 11 G are white granules in the form of a non-polar polyethylene wax that functions as a release agent, lubricant and dispersing agent. It can be used in the modification of adhesives and coating hotmelts and as rubber and cable fillers. | |
| DEUREX® E 11 K | DEUREX AG | DEUREX® E 11 K are fine white granules in a non-polar polyethylene wax with properties that see it serve as a release agent, lubricant and dispersing agent. It can be used in rubber and cable fillers and in the modification of adhesives and coating hotmel...view more DEUREX® E 11 K are fine white granules in a non-polar polyethylene wax with properties that see it serve as a release agent, lubricant and dispersing agent. It can be used in rubber and cable fillers and in the modification of adhesives and coating hotmelts. view less | |
| DEUREX® E 12 | DEUREX AG | DEUREX® E 12 is in the form of fine white granules that make up a non-polar, low-molecular polyethylene wax. A low drop point ensures the wax is suitable for fine-particle precipitation. A dispersion agent, it also has good matting and abrasion properties...view more DEUREX® E 12 is in the form of fine white granules that make up a non-polar, low-molecular polyethylene wax. A low drop point ensures the wax is suitable for fine-particle precipitation. A dispersion agent, it also has good matting and abrasion properties and can be applied as a carrier for pigment concentrates. It is useful in the modification of hotmelt adhesives and coating hotmelts and has uses in printing inks and paints and coatings industries. view less | |
| DEUREX® E 13 | DEUREX AG | DEUREX® E 13 is composed of fine white granules in a hard, stable, high-molecular polyethylene wax which has the benefit of being a dispersing agent with good matting and abrasion-resistance properties. It can be used in the modification of hotmelt adhes...view more DEUREX® E 13 is composed of fine white granules in a hard, stable, high-molecular polyethylene wax which has the benefit of being a dispersing agent with good matting and abrasion-resistance properties. It can be used in the modification of hotmelt adhesives, coating hotmelts and has applications in printing inks and paints and coatings industries. view less | |
| DEUREX® E 18 K | DEUREX AG | DEUREX® E 18 K is a non-polar polyethylene wax that comes in the form of fine white granules. A dispersing agent, the product has other benefits in terms of having good abrasion resistance and is useful as a matting and slip agent. It is used in the modif...view more DEUREX® E 18 K is a non-polar polyethylene wax that comes in the form of fine white granules. A dispersing agent, the product has other benefits in terms of having good abrasion resistance and is useful as a matting and slip agent. It is used in the modification of hotmelt adhesives and coating hotmelts as well as in the printing inks and paints and coatings industries. view less | |
| DEUREX® E 25 | DEUREX AG | DEUREX® E 25 comes in the form of white flakes that make up a high-viscous, non-polar polyethylene wax. The benefits of this wax is its high viscosity and average hardness. The viscosity allows for reduced levels of wax addition. It is also useful as a di...view more DEUREX® E 25 comes in the form of white flakes that make up a high-viscous, non-polar polyethylene wax. The benefits of this wax is its high viscosity and average hardness. The viscosity allows for reduced levels of wax addition. It is also useful as a dispersing and release agent and has the added benefit of being a lubricant. The product has uses as a filler in rubber and cable and applications in the paints and coating industries. view less | |
| DEUREX® EMU-E | DEUREX AG | DEUREX® EMU-E is a clear yellowish liquid wax emulsifier that has good wetting properties with multiple applications in varied industries. It can be used as a dispersing agent for the production of wax emulsions in the printing inks and coatings industrie...view more DEUREX® EMU-E is a clear yellowish liquid wax emulsifier that has good wetting properties with multiple applications in varied industries. It can be used as a dispersing agent for the production of wax emulsions in the printing inks and coatings industries. The product can also be used as a dispersing agent for the production of water-based wax dispersions in the printing inks and coatings industries. view less | |
| DEUREX® EMU-X | DEUREX AG | DEUREX® EMU-X is a white wax emulsifier that is useful for various natural waxes and which is ideal for sugar cane waxes. It is a dispersing agent used for solvent-free wax emulsions in the printing inks and coatings industries. | |
| DEUREX® EO 40 | DEUREX AG | DEUREX® EO 40 is made up of white granules in a polar-oxidized polyethylene wax which displays good abrasion resistance and is emusifiable under pressure. The advantages include use as a lubricant, release agent with good anti-blocking and slip properties...view more DEUREX® EO 40 is made up of white granules in a polar-oxidized polyethylene wax which displays good abrasion resistance and is emusifiable under pressure. The advantages include use as a lubricant, release agent with good anti-blocking and slip properties. It is ideal for use in the paints and coatings industries. view less | |
| DEUREX® EO 42 | DEUREX AG | DEUREX® EO 42 consists of fine, slightly yellow granules in a polar-oxidized polyethylene wax that has the benefit of acting as a lubricant, release agent with good antiblock, slip and abrasion resistance properties. It can be used in paints and coatings ...view more DEUREX® EO 42 consists of fine, slightly yellow granules in a polar-oxidized polyethylene wax that has the benefit of acting as a lubricant, release agent with good antiblock, slip and abrasion resistance properties. It can be used in paints and coatings and the printing ink industries. view less | |
| DEUREX® EV 03 | DEUREX AG | DEUREX® EV 03 is composed of fine white granules that form a copolymere polyethylene vinyl acetate wax. The wax functions as a thixotrophic agent, an anti-settling agent and a dispersing agent that can be used in the paints and coatings industries. | |
| DEUREX® H 71 P | DEUREX AG | DEUREX® H 71 P is a light yellow powder in a hybrid wax from sugar cane wax and montanic wax that has been partially saponified. A raw material for bio-based products, it can be used as a natural product in sustainable formulations. In paints and coating,...view more DEUREX® H 71 P is a light yellow powder in a hybrid wax from sugar cane wax and montanic wax that has been partially saponified. A raw material for bio-based products, it can be used as a natural product in sustainable formulations. In paints and coating, it is useful as a matting agent and to increase scratch resistance, slip and UV stability. view less | |
| DEUREX® H 72 P | DEUREX AG | DEUREX® H 72 P takes the form of a light yellow powder in a hybrid wax derived from montanic and sugar cane wax. It is a natural product that excels in sustainable formulations. It can be used as a matting agent, can improve scratch resistance, and improv...view more DEUREX® H 72 P takes the form of a light yellow powder in a hybrid wax derived from montanic and sugar cane wax. It is a natural product that excels in sustainable formulations. It can be used as a matting agent, can improve scratch resistance, and improve slip and UV stability in paints and coatings. view less | |
| DEUREX® H 73 P | DEUREX AG | DEUREX® H 73 P is a light yellow powdered hybrid wax, based on carnauba wax and sugar cane wax that is hard and crystalline and is a renewable natural product. It is used in paintings and coatings as a matting agent, with increased scratch resistance, sli...view more DEUREX® H 73 P is a light yellow powdered hybrid wax, based on carnauba wax and sugar cane wax that is hard and crystalline and is a renewable natural product. It is used in paintings and coatings as a matting agent, with increased scratch resistance, slip and UV-stability as other features. view less | |
| DEUREX® H 81 G | DEUREX AG | DEUREX® H 81 G consists of brown granules in a hybrid wax made of polyethylene and sugar cane waxes. The benefits of the product is that it has a high acid number, is emulsified in water and homogenized. A natural product, it is suitable for sustainable f...view more DEUREX® H 81 G consists of brown granules in a hybrid wax made of polyethylene and sugar cane waxes. The benefits of the product is that it has a high acid number, is emulsified in water and homogenized. A natural product, it is suitable for sustainable formulations. In coatings and powder coatings, it can be used as a matting agent, with good grip, and increased slip, scratch and UV resistance. view less | |
| DEUREX® H 82 G | DEUREX AG | DEUREX® H 82 G are brown granules in a hybrid wax of sugar cane and polyethylene waxes that have a high crystalline, millable wax with a strong surface hardness. It is a natural product that is considered useful in sustainable formulations. It is suitable...view more DEUREX® H 82 G are brown granules in a hybrid wax of sugar cane and polyethylene waxes that have a high crystalline, millable wax with a strong surface hardness. It is a natural product that is considered useful in sustainable formulations. It is suitable for use as a matting agent, with good grip, increased scratch resistance and slip as key properties in coatings and powder coatings applications. In printing inks, it also displays good scratch resistance, increased color output and UV resistance. view less | |
| DEUREX® H 83 G | DEUREX AG | DEUREX® H 83 G consists of light yellow granules in a hybrid wax made of polyethylene and sugar cane waxes that have a reduced acid number, is homogenized and emulsified. It is a natural product that has uses in sustainable formulations. The product is us...view more DEUREX® H 83 G consists of light yellow granules in a hybrid wax made of polyethylene and sugar cane waxes that have a reduced acid number, is homogenized and emulsified. It is a natural product that has uses in sustainable formulations. The product is used as a matting agent with good grip in coatings and powder coatings applications. view less | |
| DEUREX® H 84 G | DEUREX AG | DEUREX® H 84 G consists of light brown granules in a hybrid wax composed of sugar cane and polyethylene waxes. A high melting and stable wax, it is also homogenized and functions as a natural product that is suitable for sustainable formulations. In coati...view more DEUREX® H 84 G consists of light brown granules in a hybrid wax composed of sugar cane and polyethylene waxes. A high melting and stable wax, it is also homogenized and functions as a natural product that is suitable for sustainable formulations. In coatings and powder coatings, it is used as a thixotroping and matting agent with good grip, and increased scratch resistance and slip properties. In printing inks, it is also used as a thixotroping agent with improved scratch, UV-resistance and color output. view less | |
| DEUREX® H 91 K | DEUREX AG | DEUREX® H 91 K is made of fine white granules in a hybrid wax composed of Fischer Tropsch and polyethylene waxes. It displays average hardness, consists of properties with both Fischer Tropsch and polyethylene waxes and can substitute pure FT waxes. It ca...view more DEUREX® H 91 K is made of fine white granules in a hybrid wax composed of Fischer Tropsch and polyethylene waxes. It displays average hardness, consists of properties with both Fischer Tropsch and polyethylene waxes and can substitute pure FT waxes. It can be used in hot melt adhesives and coating hotmelts and in paints and coatings. view less | |
| DEUREX® P 36 | DEUREX AG | DEUREX® P 36 consists of fine white granules in a non-polar polypropylene wax. It has a low viscosity, is easy to disperse and considered a matting agent and lubricant. The product is used in printings inks and paints and coatings industries. | |
| DEUREX® P 37 | DEUREX AG | DEUREX® P 37 is made of fine white granules in a non-polar polypropylene wax that has a high viscosity, is a matting agent, lubricant and is easy to disperse. It is used in paints and coatings and printing inks industries. | |
| DEUREX® T 39 | DEUREX AG | DEUREX® T 39 consists of fine white granules in a Fischer Tropsch wax that is hard, crystalline and partially made of biomethan. The product can be used as a lubricant, processing aid and release agent. It has applications in hotmelt adhesives and coating...view more DEUREX® T 39 consists of fine white granules in a Fischer Tropsch wax that is hard, crystalline and partially made of biomethan. The product can be used as a lubricant, processing aid and release agent. It has applications in hotmelt adhesives and coating hotmelts as well as in coatings and inks. view less | |
| DEUREX® X 51 | DEUREX AG | DEUREX® X 51 comes in the form of broken yellow particles in a raw wax extracted from renewable sugar cane. The wax offers high hardness which makes it easy to emulsify and grind. It also provides good retention. The product is useful as a matting agent, ...view more DEUREX® X 51 comes in the form of broken yellow particles in a raw wax extracted from renewable sugar cane. The wax offers high hardness which makes it easy to emulsify and grind. It also provides good retention. The product is useful as a matting agent, providing grip and increased scratch resistance in coatings and powder coatings. In printing inks, it also improves scratch resistance and offers a higher color output. view less | |
| DEUREX® X 51 G | DEUREX AG | DEUREX® X 51 G consists of brown granules that make up a raw sugar cane wax which has a high hardness, is easy to emulsify, to grind and which offers good retention. The product is useful in a variety of applications including as a natural ingredient for ...view more DEUREX® X 51 G consists of brown granules that make up a raw sugar cane wax which has a high hardness, is easy to emulsify, to grind and which offers good retention. The product is useful in a variety of applications including as a natural ingredient for sustainable products, as a matting agent in coatings and powder coatings where increased grip and scratch resistance are also provided. In printing inks, it improves scratch resistance and color output. view less | |
| DEUREX® X 51 P | DEUREX AG | DEUREX® X 51 P is a light yellow powder in a raw wax, extracted from renewable sugar cane. It is a natural wax with high hardness that is easy to emulsify and grind and offers good retention. The product can be used in coatings as a matting agent, providi...view more DEUREX® X 51 P is a light yellow powder in a raw wax, extracted from renewable sugar cane. It is a natural wax with high hardness that is easy to emulsify and grind and offers good retention. The product can be used in coatings as a matting agent, providing grip and increased scratch resistance. It is also used in inks to improve color output and scratch resistance. view less | |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemic...view more Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemical resistance properties. Gloss control is achieved by varying the amount of Epomatt G-151 in the formulation. Smooth matt finishes with 60° gloss values ranging from 2% to 70% can be achieved with Epomatt G-151. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| Resiflow CP 77 | Worlée-Chemie G.m.b.H. | Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow ...view more Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow CP 77 can also be used in powder clear coats as the transparency is barely influenced. The usual surface defects such as orange peel effect, pinholes, craters and other imperfections can be eliminated by incorporating 0.5 -1.5% of Resiflow CP 77. view less | |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed...view more Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed for solvent based, oven drying coatings. view less | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow FM 4-50 | Worlée-Chemie G.m.b.H. | Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. A...view more Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally, it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. Resiflow FM 4-50 is silicone free and thus does not negatively influence the intercoat adhesion and recoatability. view less | |
| Resiflow L-3075 | Worlée-Chemie G.m.b.H. | Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hyd...view more Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. This product is used to eliminate air entrapment, foam, orange peel, pinholes, craters and improve stain resistance characteristics. It can be used in polyesters, acrylics, alkyds, phenolics, epoxies, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...view more Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow P-65F | Worlée-Chemie G.m.b.H. | Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air e...view more Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters, and other surface defects. view less | |
| Resiflow PH-240 | Worlée-Chemie G.m.b.H. | Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for pr...view more Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for primid and polyurethane, powder coatings, especially polyurethane clear coats. This product is used in epoxy, hybrid-, polyester-, polyurethanes and other powder coatings. view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 5 | Worlée-Chemie G.m.b.H. | Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and...view more Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and injection molding compositions based on acrylic, epoxy, polyester and polyurethane resins. Resiflow PV 5 is also suitable for hybrid systems and polyester/glycoluril powder coatings. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade...view more Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade appears as a medium viscous liquid. Resiflow W 51 is suitable for solvent as well as for water based coatings and inks view less | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carbo...view more Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralization with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...view more Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...view more WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. view less | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...view more WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. view less | |
| WorléeAdd 101 P | Worlée-Chemie G.m.b.H. | WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, ...view more WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as plasticizer. W´Add 101 is used to improve levelling and to avoid surface imperfections as orange peel effect, cratering, Benard's cells etc.. This product is also UV-stable. view less | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...view more WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. view less | |
| WorléeAdd 1500 | Worlée-Chemie G.m.b.H. | WorléeAdd 1500 is a dimethylsiloxane additive for use in gravure inks, offset printing inks, and overprint inks. It is a viscous liquid water white/slightly yellowish substance. This product is soluble in mineral oil, aliphatic and aromatic hydrocarbons. | |
| WorléeAdd 18 | Worlée-Chemie G.m.b.H. | WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flow...view more WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a fine particle size silica carrier. view less | |
| WorléeAdd 2000 | Worlée-Chemie G.m.b.H. | WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears...view more WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears as a clear to slightly turbid, yellowish low viscous liquid. view less | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...view more WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 317 | Worlée-Chemie G.m.b.H. | WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum sur...view more WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum surface properties to decorative paints, stoving enamels and metallic car paints. W´Add 317 improves the mar resistance and surface wetting of solvent based furniture lacquers of different composition. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears...view more WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears as a clear to slightly turbid yellowish liquid. view less | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk ...view more WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk gloss to glossy latex paints. This product can also be used for paints and printing inks based on alcohols. view less | |
| WorléeAdd 352 | Worlée-Chemie G.m.b.H. | WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable ...view more WorléeAdd 352 is a high molecular silicone additive for the improvement of surface properties of water thinnable lacquers and printing inks. It appears as a turbid, creamy, still-flowing substance. W´Add 352 improves scratch resistance of water thinnable lacquers and printing inks as well as satin glossy up to glossy latex prints. W´Add 352 can be used for alcohol based lacquers and printing inks. view less | |
| WorléeAdd 355 | Worlée-Chemie G.m.b.H. | WorléeAdd 355 is a stable polydimethylsiloxane emulsion mainly for use in air and oven drying, water thinnable paints, dispersions, and printing inks. It is also used for wood and paper lacquers, and can be applied by curtain coating. It is also recommend...view more WorléeAdd 355 is a stable polydimethylsiloxane emulsion mainly for use in air and oven drying, water thinnable paints, dispersions, and printing inks. It is also used for wood and paper lacquers, and can be applied by curtain coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...view more WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 360 | Worlée-Chemie G.m.b.H. | WorléeAdd 360 is a low molecular weight, hydroxy functional, silicone based additive. It is used mainly for powder coatings, improving mar resistance, slip, and flow. W´Add 360 is used in powder coatings based on epoxy, polyester, acrylic and polyurethane...view more WorléeAdd 360 is a low molecular weight, hydroxy functional, silicone based additive. It is used mainly for powder coatings, improving mar resistance, slip, and flow. W´Add 360 is used in powder coatings based on epoxy, polyester, acrylic and polyurethane resin. As a flaked resin it is easily incorporated into powder coating formulations by standard dry blending operation. view less | |
| WorléeAdd 370 | Worlée-Chemie G.m.b.H. | WorléeAdd 370 is a silicone based antifoaming and debubbling agent for solvent based paints and printing inks of different compositions. W´Add 370 is also very well suited for high solids. If lower concentration is desired, it may be diluted with ketone o...view more WorléeAdd 370 is a silicone based antifoaming and debubbling agent for solvent based paints and printing inks of different compositions. W´Add 370 is also very well suited for high solids. If lower concentration is desired, it may be diluted with ketone or ester solvents. When used at normal level, finishes or inks are generally recoatable without surface preparation. view less | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...view more WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. view less | |
| WorléeAdd 372 | Worlée-Chemie G.m.b.H. | WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be adde...view more WorléeAdd 372 is a silicone based antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 372 is also very well suited for high solids. W´Add 372 is very effective at concentrations of 0.05 - 0.80% and can be added at any process stage during manufacture. If lower concentration is desired, it may be diluted with ketone or ester solvents. view less | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...view more WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. view less | |
| WorléeAdd 410 N | Worlée-Chemie G.m.b.H. | WorléeAdd 410 N is a special viscosity stabilizer and anit-gelling agent for solvent based air drying and stoving paints. W´Add 410 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. This product i...view more WorléeAdd 410 N is a special viscosity stabilizer and anit-gelling agent for solvent based air drying and stoving paints. W´Add 410 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. This product is soluble with aromates, aliphates, ketones and alcohols. view less | |
| WorléeAdd 411 N | Worlée-Chemie G.m.b.H. | WorléeAdd 411 N is a special viscosity stabilizer and anti-gelling agent for solvent based air drying and stoving paints. W´Add 411 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. For each formu...view more WorléeAdd 411 N is a special viscosity stabilizer and anti-gelling agent for solvent based air drying and stoving paints. W´Add 411 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. For each formulation an individual laboratory test is required to determine the optimum concentration of the additive. view less | |
| WorléeAdd 412 | Worlée-Chemie G.m.b.H. | WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the ...view more WorléeAdd 412 is a solvent free compatibility agent based on a modified copolymer for easier incorporation of driers into water-borne alkyd paints. It improves the compatibility of driers with alkyd resin emulsions and makes the equal distribution in the system easier. By this, precipitation can be avoided. view less | |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is solu...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| WorléeAdd 425 | Worlée-Chemie G.m.b.H. | WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small addit...view more WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small additional quantities W´Add 425 features a fast foam destroying, so that foam and blister free surfaces can be produced. view less | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...view more WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. view less | |
| WorléeAdd 429 | Worlée-Chemie G.m.b.H. | WorléeAdd 429 is a silicone containing addictive with multifunctional properties. In solvent based silk gloss paints it facilitates the rising of matting agents and by this matting is improved. W´Add 429 has a positive effect on surface properties such as...view more WorléeAdd 429 is a silicone containing addictive with multifunctional properties. In solvent based silk gloss paints it facilitates the rising of matting agents and by this matting is improved. W´Add 429 has a positive effect on surface properties such as slip and mar resistance and prevents foam building. This product appears as a colourless liquid. view less | |
| WorléeAdd 456 | Worlée-Chemie G.m.b.H. | WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd e...view more WorléeAdd 456 is a nitrite-free organic corrosion inhibitor for aqueous lacquers. W´Add 456 is used in aqueous systems as an anti flash rust agent as well as for improving long term corrosion resistance. Application fields are acrylic dispersions, alkyd emulsion, one-component and two-component PU systems. This product appears as a colourless to slightly yellowish liquid. view less | |
| WorléeAdd 458 | Worlée-Chemie G.m.b.H. | WorléeAdd 458 is a nitrit-free flash rust inhibitor for water-borne coatings, especially for those based on latexes. W´Add 458 is forming a film on top of an "anodic" action, which prevents the appearance of rust discoloration, well-known as "flash rust" ...view more WorléeAdd 458 is a nitrit-free flash rust inhibitor for water-borne coatings, especially for those based on latexes. W´Add 458 is forming a film on top of an "anodic" action, which prevents the appearance of rust discoloration, well-known as "flash rust" during the paint application. This product can be used in emulsion paints as well as in water-borne anticorrosion paints e.g. based on W´Cryl 7158. view less | |
| WorléeAdd 480 N | Worlée-Chemie G.m.b.H. | WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred app...view more WorléeAdd 480 N is a special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. It improves the adhesion on metal, e. g. steel, zinc coating, aluminium, tin plate and also on glass. Preferred application fields are aqueous baking enamels for example on basis polyester, alkyd or acrylate in combination with amino resin or blocked polyisocyanate as well as air and oven drying two component polyurethane systems. W´Add 480 N is incorporated in the lacquer by thoroughly stirring. The optimal addition quantity empirically is 1.0 - 5.0% calculated on total formulation and should be determined by a serial trial. view less |
