| Acrylic Crosslinker GMA-300 | Worlée-Chemie G.m.b.H. | Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids...view more Acrylic Crosslinker GMA-300 is a glycidyl functional acrylic terpolymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used in combination with other resins and curing agents in UV-curable, high-solids, solvent-based and powder coating systems. In powder coatings using carboxylated resins, Acrylic Crosslinker GMA-300 will increase the crosslink density, the mechanical properties and the chemical resistance. view less | |
| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cau...view more DOWSIL™ 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. view less | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...view more DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. view less | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (V...view more DOWSIL™ 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. view less | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol fun...view more DOWSIL™ 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. view less | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolym...view more DOWSIL™ 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. view less | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enha...view more DOWSIL™ 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. view less | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...view more DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. view less | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, a...view more DOWSIL™ 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. view less | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each produ...view more DOWSIL™ 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone view less | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with l...view more DOWSIL™ 62 Additive is a water-based silicone antifoam, effective at low concentrations. It provides highly effective and long-lasting foam control. This product is readily dispersible in water-based inks and coatings. It offers good compatibility, with low tendency to cause defects or affect coating gloss. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of p...view more DOWSIL™ 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. view less | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and ...view more DOWSIL™ 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven...view more DOWSIL™ 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. view less | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene e...view more DOWSIL™ 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. view less | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Epomatt G-151 | Worlée-Chemie G.m.b.H. | Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemic...view more Epomatt G-151 is a special type of gloss modifier for epoxy-based powder coatings. The product, when cured with o-tolyl biguanide (OTB) or other common epoxy curing agents such as accelerated dicyandiamide provides coatings with good mechanical and chemical resistance properties. Gloss control is achieved by varying the amount of Epomatt G-151 in the formulation. Smooth matt finishes with 60° gloss values ranging from 2% to 70% can be achieved with Epomatt G-151. view less | |
| Epoxy Hardener G-91 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy cost...view more Epoxy Hardener G-91 is a new type of epoxy hardener producing epoxy powder coatings with excellent mechanical properties and good color stability. Powder coatings with Epoxy Hardener G-91 can be cured at temperatures as low as 130 °C. Reducing energy costs and offering the powder coater flexibility in curing conditions as well as the possibility to coat heat sensitive substrates are the advantages. When medium and low gloss finishes are desired, Epoxy Hardener G-91 can be used in combination with Epomatt G-152 to formulate powder coatings with a wide range of possible gloss levels. view less | |
| Epoxy Hardener G-92 | Worlée-Chemie G.m.b.H. | Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings ...view more Epoxy Hardener G-92 is a catalyzed phenolic curing agent for use with epoxy and epoxy novolac resins. Powder coatings made with Epoxy Hardener G-92 will exhibit the excellent chemical resistance and mechanical properties for which phenolic epoxy coatings are noted. Epoxy Hardener G-92 allows the formulator the versatility of using differing cure cycles while maintaining performance properties. For example, powder coatings made with Epoxy Hardener G-92 can be “snap” cured in 2 minutes at 200 °C or low temperature cured in 20 minutes at 120 °C while maintaining both mechanical (160 reverse inch pounds impact) and chemical resistance (100+ MEK double rubs) properties. view less | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...view more ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. view less | |
| Resiflow CP 77 | Worlée-Chemie G.m.b.H. | Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow ...view more Resiflow CP 77 is a free flowing powder used as a flow control agent and especially as an anti-cratering agent in powder coating applications. It is based on liquid oligomer converted into free flowing powder by adsorbing it on a silica carrier. Resiflow CP 77 can also be used in powder clear coats as the transparency is barely influenced. The usual surface defects such as orange peel effect, pinholes, craters and other imperfections can be eliminated by incorporating 0.5 -1.5% of Resiflow CP 77. view less | |
| Resiflow FK 70 | Worlée-Chemie G.m.b.H. | Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed...view more Resiflow FK 70 is a silicone free, anti-flooding and flow agent which is also an amino resin modified acrylic copolymer that prevents flooding in polyester/melamine based paints which contain critical pigment blends. Resiflow FK 70 is especially developed for solvent based, oven drying coatings. view less | |
| Resiflow FL 2 | Worlée-Chemie G.m.b.H. | Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorpo...view more Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as an additive to correct imperfections in coatings and printing ink formulations. Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. view less | |
| Resiflow FL 9 | Worlée-Chemie G.m.b.H. | Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellu...view more Resiflow FL 9 is a silicone free acrylic oligomer used to improve flow, eliminate orange peel effect, pinholes, craters, and other surface defects on coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. Resiflow FL 9 will react with most thermosetting resins to form a cross linked system. It exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. view less | |
| Resiflow FM 4 | Worlée-Chemie G.m.b.H. | Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additional...view more Resiflow FM 4 is an acrylic based additive used in solvent based coatings, high solids, coil coatings, and powder systems. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. The method of incorporating this additive into coating systems does not affect its performance as long as it is uniformly dispersed in the system. This can be easily achieved by mixing Resiflow FM 4 with the other paint ingredients. view less | |
| Resiflow FM 4-50 | Worlée-Chemie G.m.b.H. | Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. A...view more Resiflow FM 4-50 is an acrylic based additive, solved in xylene and used in solvent based coatings, high solids, coil coatings etc. If applied at effective concentrations, it will correct surface imperfections, improve flexibility and increase adhesion. Additionally, it exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose gloss when exposed to UV-radiation. Resiflow FM 4-50 is silicone free and thus does not negatively influence the intercoat adhesion and recoatability. view less | |
| Resiflow L-3075 | Worlée-Chemie G.m.b.H. | Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hyd...view more Resiflow L-3075 is a special acrylic polymer for use in coil coating systems. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve film characteristics. Resiflow L-3075 exhibits excellent hydrolytic stability and outdoor durability and does not yellow or lose gloss when exposed to UV radiation. This product is used to eliminate air entrapment, foam, orange peel, pinholes, craters and improve stain resistance characteristics. It can be used in polyesters, acrylics, alkyds, phenolics, epoxies, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow L-66F | Worlée-Chemie G.m.b.H. | Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and el...view more Resiflow L-66F is an acrylic polymer used in high solids, UV curing, coil and powder coatings systems. It has been specifically designed to provide excellent clarity in clear non-pigmented coatings. This clear viscous liquid is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections, and improve the flexibility of coatings. view less | |
| Resiflow LH 241 | Worlée-Chemie G.m.b.H. | Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additio...view more Resiflow LH 241 is a non-silicone, acrylic flow control additive. If applied at effective concentrations, it will eliminate air entrapment, correct surface imperfections and improve film characteristics against stain without affecting flexibility. Additionally, Resiflow LH 241 is functional and self-crosslinking. During the cure cycle, it can react with the binder system of the thermoset coating and also crosslink with itself. Resiflow LH 241 is used to eliminate air entrapment, foam, orange peel, pinholes, craters and enhance resistance against dirt and stain. It can be used in polyester melamine, acrylics, alkyds, phenolics, epoxies, polyurethanes and other systems. view less | |
| Resiflow LH-240 | Worlée-Chemie G.m.b.H. | Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfect...view more Resiflow LH-240 is a surface active oligomer used in solvent based, high solids and powder coating formulations. If applied at effective concentrations, it eliminates problems associated with degassing during film formation, will correct surface imperfections, and improves flexibility of the coatings. Resiflow LH-240 is used to promote flow, eliminate orange-peel effect, pinholes, craters, and other surface defects in coatings and lacquers. It can be used in acrylics, alkyds, epoxies, polyesters, polyurethanes, nitrocellulose lacquers and other systems. view less | |
| Resiflow LW | Worlée-Chemie G.m.b.H. | Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of c...view more Resiflow LW is a silicone free, polymeric flow control agent used in so called high solid coatings, one component as well as two component systems. If applied at an effective concentration it will correct surface imperfections and improve flexibility of coatings. Resiflow LW exhibits excellent hydrolytic stability and outdoor durability. It does not yellow or loose its gloss when exposed to UV-radiation. view less | |
| Resiflow P 67 | Worlée-Chemie G.m.b.H. | Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flo...view more Resiflow P 67 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a silica carrier. Resiflow P 67 is convenient in handling and reliable in performance. It is also a UV stable product with excellent outdoor durability. view less | |
| Resiflow P-64F | Worlée-Chemie G.m.b.H. | Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically design...view more Resiflow P-64F is an acrylic flow control agent designed for powder coating systems. It is based on a liquid polymer which has been converted into free-flowing powder by absorption onto a specific silica filler. Resiflow P-64F has been specifically designed to provide outstanding clarity in clear acrylic powder coatings. If applied at effective concentrations, it will correct surface imperfections and provide a smooth film with high distinctiveness of image (DOI). view less | |
| Resiflow P-65F | Worlée-Chemie G.m.b.H. | Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air e...view more Resiflow P-65F is a free-flowing powder used as a flow agent in powder coating applications. It is based on a liquid polymer converted into free-flowing powder by adsorbing it on a silica carrier. Resiflow P-65F is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters, and other surface defects. view less | |
| Resiflow PH-240 | Worlée-Chemie G.m.b.H. | Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for pr...view more Resiflow PH-240 is a free flowing powder used as a flow control agent in powder coating formulations. This additive is designed to meet the most difficult processing and application requirements. Resiflow PH-240 is recommended for hybrid as well as for primid and polyurethane, powder coatings, especially polyurethane clear coats. This product is used in epoxy, hybrid-, polyester-, polyurethanes and other powder coatings. view less | |
| Resiflow PL 200 | Worlée-Chemie G.m.b.H. | Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids s...view more Resiflow PL-200 is a silicone free acrylic flow control agent for epoxy-, polyester-, acrylic resin, hybrid and other powder coating systems. The addition of Resiflow PL-200 improves the adhesion to substrate, deairing, flow and recoatability and avoids surface imperfections as craters, pin-holes, orange peel effect etc. This product appears as a white powder. view less | |
| Resiflow PV 5 | Worlée-Chemie G.m.b.H. | Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and...view more Resiflow PV 5 is a white, free flowing powder specifically developed as a flow and levelling control agent to correct surface imperfections in powder coating and injection molding systems. It is recommended as a flow promoting agent for powder coating and injection molding compositions based on acrylic, epoxy, polyester and polyurethane resins. Resiflow PV 5 is also suitable for hybrid systems and polyester/glycoluril powder coatings. view less | |
| Resiflow PV 88 | Worlée-Chemie G.m.b.H. | Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommend...view more Resiflow PV 88 is a white, free-flowing powder flow and levelling agent especially developed to correct surface imperfections in powder and injection molding systems. It is a UV-stable product with excellent outdoor durability. Resiflow PV 88 is recommended as a flow promoting agent for powder coating and injection molding compositions based on e.g. acrylic, epoxy, polyester, hybrid and polyurethane resins. Resiflow PV 88 is also suitable for polyester/glycoluril powder coatings. view less | |
| Resiflow W 51 | Worlée-Chemie G.m.b.H. | Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade...view more Resiflow W 51 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This grade appears as a medium viscous liquid. Resiflow W 51 is suitable for solvent as well as for water based coatings and inks view less | |
| Resiflow W 52 | Worlée-Chemie G.m.b.H. | Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carbo...view more Resiflow W 52 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralization with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Resiflow W 5200 | Worlée-Chemie G.m.b.H. | Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This car...view more Resiflow W 5200 is a silicone free, modified polyacrylate flow control agent and resin modifier. It exhibits an excellent compatibility with various resins and is recommended for solvent based and especially for aqueous systems and printing inks. This carboxylic polymer can be made water soluble by neutralisation with an organic amine or ammonia. Pinholes, craters, pores, fish eyes, roller marks, orange peel effect and other surface imperfections can be eliminated or substantially reduced. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...view more WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. view less | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...view more WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. view less | |
| WorléeAdd 101 P | Worlée-Chemie G.m.b.H. | WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, ...view more WorléeAdd 101 P is a white, free-flowing powder flow and leveling agent especially developed to correct surface imperfections in powder and injection molding systems. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as plasticizer. W´Add 101 is used to improve levelling and to avoid surface imperfections as orange peel effect, cratering, Benard's cells etc.. This product is also UV-stable. view less | |
| WorléeAdd 1200 | Worlée-Chemie G.m.b.H. | WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This p...view more WorléeAdd 1200 is a synthetic wax to provide excellent stability against buff resistance, slip properties, and to improve the water and mar resistance. W´Add 1200 can be used in solvent based, aqueous and also UV-curing systems and powder coatings. This product appears as a fine white powder. view less | |
| WorléeAdd 1500 | Worlée-Chemie G.m.b.H. | WorléeAdd 1500 is a dimethylsiloxane additive for use in gravure inks, offset printing inks, and overprint inks. It is a viscous liquid water white/slightly yellowish substance. This product is soluble in mineral oil, aliphatic and aromatic hydrocarbons. | |
| WorléeAdd 18 | Worlée-Chemie G.m.b.H. | WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flow...view more WorléeAdd 18 is a white free flowing powder specifically developed as a flow and levelling agent to correct surface imperfections in powder coatings based on different resins. The active content is a liquid oligomer which has been converted into free flowing powder by absorbing it onto a fine particle size silica carrier. view less | |
| WorléeAdd 2000 | Worlée-Chemie G.m.b.H. | WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears...view more WorléeAdd 2000 is a catalyst which can be used in solvent based as well as in aqueous isocyanate cross-linked polyols, hydroxy acrylates, and polyesters. This catalyst is used for a remarkable reduction of drying time, especially tack-freeness. It appears as a clear to slightly turbid, yellowish low viscous liquid. view less | |
| WorléeAdd 2030 | Worlée-Chemie G.m.b.H. | WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compa...view more WorléeAdd 2030 is a 28% solution of an aromatic disulfonic acid in isobutanol / methoxy propyl acetate (MPA). It is a clear, yellow liquid which is used as a catalyst for promoting the cure of solvent and water based stoving finishes. The advantages compared to para-toluene sulfonic acid are improved water, saltspray and detergent resistance at lower temperatures, higher electrical resistance and less corrosion of application equipment, higher gloss of the cured paint film and better stability of the paints. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 317 | Worlée-Chemie G.m.b.H. | WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum sur...view more WorléeAdd 317 is a modified silicone additive used to improve the characteristics of solvent based paints and printing inks, e.g. all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for imparting optimum surface properties to decorative paints, stoving enamels and metallic car paints. W´Add 317 improves the mar resistance and surface wetting of solvent based furniture lacquers of different composition. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 345 | Worlée-Chemie G.m.b.H. | WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears...view more WorléeAdd 345 is a special additive for improving the substrate wetting of aqueous systems. It is based on dioctylsulfosuccinate and a silicone copolyether. Typical applications are coatings on wood, printing inks, care products etc.. This product appears as a clear to slightly turbid yellowish liquid. view less | |
| WorléeAdd 351 | Worlée-Chemie G.m.b.H. | WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk ...view more WorléeAdd 351 is a high molecular silicone additive for improving the surface properties of water thinnable paints and printing inks. W´Add 351 improves scratch resistance and surface smoothness of water thinnable paints and printing inks as well as silk gloss to glossy latex paints. This product can also be used for paints and printing inks based on alcohols. view less |
