| Efka® 4403 N | BASF Formulation Additives | Efka® 4403 N is a polymeric dispersant for stabilizing inorganic and organic pigments. Efka® 4403 N is mainly used for co-grinding of all kinds of pigment blends in solvent-based coatings as well as in gel coats. | |
| Efka® 4560 | BASF Formulation Additives | Efka® 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. Efka® 456...view more Efka® 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. Efka® 4560 is, in combination with Efka® 1503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). view less | |
| Hydropalat® 100 | BASF Formulation Additives | Hydropalat® 100 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Hydropalat® 1080 | BASF Formulation Additives | Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 a...view more Hydropalat® 1080 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. Hydropalat® 1080 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types Hydropalat® 1080 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. view less | |
| HYDROPALAT® 3065 | BASF Formulation Additives | A wetting and dispersing agent for aqueous coatings and pigment pastes, more hydrophilic than HYDROPALAT 1080. | |
| HYDROPALAT® 5040 | BASF Formulation Additives | A wetting and dispersing agent to optimize the dispersing process of pigments and fillers in aqueous system like emulsion paints (matt to glossy), pigment and filler slurries, pigment pastes, ceramics, etc. | |
| Hydropalat® 88 | BASF Formulation Additives | Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems...view more Hydropalat® 88 is a wetting- and dispersing agent for aqueous coatings and printing inks, modified ester of sulfocarboxylic acid. This product is characterized by its excellent solubility in water and its optimal compatibility in different polymer systems. Hydropalat® 88 contains none of the flammable cosolvents needed to improve the solubility of other, conventional sulfocarboxylic acid-based surfactants. Hydropalat® 88, with a flash point of > 100 °C, is therefore not a dangerous substance as defined in the applicable transport regulations. The absence of highly volatile consolvents gives Hydropalat 88 obvious advantages in term of ease of handling. It does not show troublesome skin formation on the product surface, which can occur spontaneously in concentrated surfactant formulations that contain solvents. view less | |
| HYDROPALAT® P | BASF Formulation Additives | Non ionic powdered wetting and dispersing agent for plasters, mortars, fillers and tile adhesives etc. based on oleo-alkylenoxide-block copolymer coated on silica. | |
| TEXAPHOR® 873 CONC | BASF Formulation Additives | A dispersing agent for pigment pastes consisting mainly of inorganic pigments and organic media and used for the colouring of plastics, coatings, and printing inks. | |
| Texaphor® 963 | BASF Formulation Additives | Texaphor® 963 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...view more Texaphor® 963 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. Texaphor® 963 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. view less | |
| Texaphor® P 63 | BASF Formulation Additives | Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time ...view more Texaphor® P 63 is a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. This yellowish liquid is a modified polyurethane. Texaphor® P 63 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, Texaphor® P 63 prevents flooding and floating of pigments and promotes excellent gloss and high color intensity. This product is readily compatible with a wide range of binder types. Pigment pastes based on Texaphor® P 63 can therefore be used in 2-component polyurethane paints, 2 - component epoxy paints, unsaturated polyester, stoving paints and air drying paints. view less | |
| Texaphor® SF 71 | BASF Formulation Additives | Texaphor® SF 71 is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full solid systems. Texaphor®...view more Texaphor® SF 71 is a wetting and dispersing agent for reactive resins. This colorless to pale yellow liquid is a mixture of ionic and nonionic esters. Its viscosity-reducing properties make it especially suitable for high and full solid systems. Texaphor® SF 71 ensures that fillers are quickly and optimally dispersed. The reduction in viscosity enables fillers to be blended more easily and allows a higher filler content to be achieved. Texaphor® SF 71 is readily compatible with a wide variety of binder types and can therefore be used in 2-component PUR, 2-component EP and unsaturated polyester resins. view less |
