| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. view less | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. view less | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. view less | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. view less | |
| Lab Formulation for Exterior and Interior Gloss Paints [Lacquers] (Formulation #L 6003 FAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior gloss paints (Lacquers) that contain Mowilith LDM 7451 and Mowilith LDM 7002. | |
| Lab Formulation for Exterior and Interior Plaster, White (Formulation #L 4039 PAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior white plaster that contains Omyacarb 40 GU, Omyacarb 130 GU, Carolith 0,1-0,5 and Carolith 1,5-2,0. | |
| Lab Formulation for Façade Paint (Formulation #L 3049 FAI-e) | Celanese Emulsion Polymers | This formulation is for facade paint that contains Mowilith LDM 7717. | |
| Lab Formulation for Interior Emulsion Paint, White (Formulation #L 2026 FI-e) | Celanese Emulsion Polymers | This formulation is for white interior emulsion paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Interior Low Emission Paint (Formulation #L 2025 FI-e) | Celanese Emulsion Polymers | This formulation is for interior low emission paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Low Emission Interior Paint (Formulation #L 2034 FI-e) | Celanese Emulsion Polymers | An interior paint with Mowilith® LDM 7412 that is easy to clean and has a low odor. This guide formulation does not contain preservatives. In order to guarantee the microbial stability of the formulation the addition of preservatives is necessary. | |
| Lab Formulation for Semi Gloss Interior Paint, Low VOC (Formulaton #L 6048 FAI-e) | Celanese Emulsion Polymers | This formulation is for semi gloss interior paint with low VOC that contains Mowilith LDM 1852. | |
| Solventborne 2K PU White Topcoat (Formulation #21-20001) | Patcham LTD | This solventborne 2K PU white topcoat features Pat-Add DA 1801. It is suitable for general industrial coatings, wood coatings, and auto refinish coatings. | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Waterborne Epoxy Primer (Formulation #21- 10001) | Patcham LTD | This waterborne epoxy primer features Pat-Add DA 817. It is suitable for general industrial coatings. | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less |
