| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | |
| AMP® | ANGUS Chemical Company | AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| Mowilith® DM 2 H | Celanese Emulsion Polymers | Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints wit...view more Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints with excellent weather resistance for wood and other substrates (weather protection paints). The paint films do not become brittle under the influence of humidity and show good water vapour permeability. view less | |
| Mowilith® LDM 1828 | Celanese Emulsion Polymers | Mowilith® LDM 1828 is an aqueous copolymer dispersion based on vinyl acetate, vinyl esters and ethylene. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 1840 | Celanese Emulsion Polymers | Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastom...view more Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastomeric roof coatings. view less | |
| Mowilith® LDM 1852 | Celanese Emulsion Polymers | Mowilith® LDM 1852 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. This product is especially suited for the formulation of interior medium pvc latex paints of low odour without any solvents and/or plasticizers. | |
| Mowilith® LDM 1865 | Celanese Emulsion Polymers | Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and...view more Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and without any solvents and/or plasticizers. Mowilith® LDM 1865 can also be used to formulate high quality and solvent-free interior satin paints with good block resistance. view less | |
| Mowilith® LDM 1871 | Celanese Emulsion Polymers | Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. Th...view more Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1880 | Celanese Emulsion Polymers | Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and with...view more Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1881 | Celanese Emulsion Polymers | Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and witho...view more Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 2110 | Celanese Emulsion Polymers | Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-boun...view more Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-bound plasters and textured coatings. A very special possible application area is the formulation of lime finishes. view less | |
| Mowilith® LDM 2301 | Celanese Emulsion Polymers | Mowilith® LDM 2301 is an aqueous copolymer dispersion based on vinyl acetate and vinyl neodecanoate. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 2383 | Celanese Emulsion Polymers | Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In t...view more Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In these applications, it boasts excellent wet scrub resistance combined with high gloss levels. For the painter, it offers good rheological behaviour and ease of application. view less | |
| Mowilith® LDM 2416 | Celanese Emulsion Polymers | Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as sem...view more Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as semi-gloss and thixotropic paints. The semigloss paints made with this dispersion have a good gloss level and a good rheological behaviour. view less | |
| Mowilith® LDM 2454 | Celanese Emulsion Polymers | Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, ...view more Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, conventional latex paints, masonry paints, deep shade paints, and more. Mowilith® LDM 2454 is a multi-purpose binder with several possible application areas, especially textured coatings, and it offers exceptionally high pigment binding power. view less | |
| Mowilith® LDM 6119 | Celanese Emulsion Polymers | Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. ...view more Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. The dispersion is especially suited for those applications which have high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 6159 | Celanese Emulsion Polymers | Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP)....view more Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP). Stain-blocking primers formulated with Mowilith® LDM 6159 feature good barrier properties against difficult stains such as tannin, grease or smoke in order to protect the top coat from discoloration. view less | |
| Mowilith® LDM 6482 | Celanese Emulsion Polymers | Mowilith® LDM 6482 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is also suitable for the formulation of crack-bridging and water-proof coating compounds and flexible roof coatings. | |
| Mowilith® LDM 6636 | Celanese Emulsion Polymers | Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resista...view more Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resistance. Such tile adhesives are important for bath rooms or kitchens, or in general such places with a high exposure to water. Usual fillers like silica or calcium carbonate may be used for the production of ceramic tile adhesives. Suitable wetting and dispersing agents are sodium hexametaphosphate or polyphosphates. view less | |
| Mowilith® LDM 6911 | Celanese Emulsion Polymers | Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially...view more Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially suited for those applications with high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 7281 | Celanese Emulsion Polymers | Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-b...view more Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-bound plasters. view less | |
| Mowilith® LDM 7411 | Celanese Emulsion Polymers | Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7412 | Celanese Emulsion Polymers | Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and ...view more Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and low odour. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the effect of water and simultaneous mechanical stress. view less | |
| Mowilith® LDM 7416 | Celanese Emulsion Polymers | Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. High hail stone resistance is a further feature of this emulsion. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7431 | Celanese Emulsion Polymers | Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with h...view more Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with high demand of low blocking, low liquid water uptake, good adhesion too many substrates and early water resistance. view less | |
| Mowilith® LDM 7451 | Celanese Emulsion Polymers | Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with...view more Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with good scratch and block resistance. view less | |
| Mowilith® LDM 7461 | Celanese Emulsion Polymers | Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and b...view more Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and blocking properties. Mowilith® LDM 7461 is a fine dispersed emulsion with low viscosity and good mechanical stability. At temperatures higher than approx. 25 °C it forms a clear and hard film with a very good resistance towards grease, water and alkaline solutions. view less | |
| Mowilith® LDM 7510 | Celanese Emulsion Polymers | Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new g...view more Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new generation of acrylic emulsions for glossy trim paints formulated without coalescing agents. It offers a good balance of block resistance and elasticity. view less | |
| Mowilith® LDM 7667 | Celanese Emulsion Polymers | Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on...view more Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on porous substrates like gypsum, plasters and concrete. The dispersion may also be used as a binder for impregnating wood stains. view less | |
| Mowilith® LDM 7671 | Celanese Emulsion Polymers | Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of...view more Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of these properties Mowilith® LDM 7671 is particularly suited for the formulation of elastomeric wall coatings and crack-bridging systems. view less | |
| Mowilith® LDM 7709 | Celanese Emulsion Polymers | Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and...view more Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and textured coatings. The product can be used also in combination with silicate binders after testing. The emulsion offers excellent outdoor durability and optimised dirt pick up which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7714 | Celanese Emulsion Polymers | Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on ...view more Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on old alkyd coatings or zinc plates. The special adhesion and cross-linking system of Mowilith® LDM 7714 give rise to outstanding wet adhesion in addition to low dirt-pickup. view less | |
| Mowilith® LDM 7717 | Celanese Emulsion Polymers | Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith...view more Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith® LDM 7717 combines low water uptake with good hardness, which translates into excellent weathering behaviour in paints, plasters and external insulation and finishing systems. view less | |
| Mowilith® LDM 7719 | Celanese Emulsion Polymers | Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, a...view more Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, and masonry paints with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7722 | Celanese Emulsion Polymers | Mowilith® LDM 7722 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7722 is especially suitable as binder for masonry coatings and mid sheen paints (latex paints) with lower pvc. | |
| Mowilith® LDM 7724 | Celanese Emulsion Polymers | Mowilith® LDM 7724 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7724 is especially designed as a binder for gloss paints and low pigmented wood coatings of all kinds. | |
| Mowilith® LDM 7729 | Celanese Emulsion Polymers | Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission ...view more Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission deep shade paints, and low emission masonry paints, with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7764 | Celanese Emulsion Polymers | Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. Th...view more Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. The dispersion can be used with or without pigmentation. Properly formulated paints based on Mowilith® LDM 7764 will exhibit excellent resistance towards water and alkaline solutions. Such paints will also show a good weather resistance, an excellent blocking resistance and a good resistance towards efflorescence. view less | |
| Mowilith® LDM 7991 | Celanese Emulsion Polymers | Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interio...view more Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interior use) and metal (as primer). The dispersion is also suitable as combination partner to be mixed with other softer polymer dispersion to improve their hardness and block resistance, for example. However, proper compatibility tests have to be performed at any rate. The storage stability and tendency for discoloration of these mixtures must be observed carefully. view less | |
| Mowilith Nano® 9420 | Celanese Emulsion Polymers | Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed...view more Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed as binder for all kinds of coatings, however especially for the formulation of paints and emulsion-based plasters. view less | |
| NIKANE® MS 3000 | ANGUS Chemical Company | NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent...view more NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent that has been designed for use with a wide variety of other solvents, it is of particular value in formulations as a replacement for a portion of active solvents such as methyl isobutyl ketone (MIBK) or acetates (n-butyl acetate, etc.). view less | |
| NIKANE® MS 5000 | ANGUS Chemical Company | NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirab...view more NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirable, if not essential, in many applications. view less | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less | |
| Lab Formulation for Exterior and Interior Gloss Paints [Lacquers] (Formulation #L 6003 FAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior gloss paints (Lacquers) that contain Mowilith LDM 7451 and Mowilith LDM 7002. | |
| Lab Formulation for Exterior and Interior Plaster, White (Formulation #L 4039 PAI-e) | Celanese Emulsion Polymers | This formulation is for exterior and interior white plaster that contains Omyacarb 40 GU, Omyacarb 130 GU, Carolith 0,1-0,5 and Carolith 1,5-2,0. | |
| Lab Formulation for Façade Paint (Formulation #L 3049 FAI-e) | Celanese Emulsion Polymers | This formulation is for facade paint that contains Mowilith LDM 7717. | |
| Lab Formulation for Interior Emulsion Paint, White (Formulation #L 2026 FI-e) | Celanese Emulsion Polymers | This formulation is for white interior emulsion paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Interior Low Emission Paint (Formulation #L 2025 FI-e) | Celanese Emulsion Polymers | This formulation is for interior low emission paint that contains Mowilith LDM 1871. | |
| Lab Formulation for Low Emission Interior Paint (Formulation #L 2034 FI-e) | Celanese Emulsion Polymers | An interior paint with Mowilith® LDM 7412 that is easy to clean and has a low odor. This guide formulation does not contain preservatives. In order to guarantee the microbial stability of the formulation the addition of preservatives is necessary. | |
| Lab Formulation for Semi Gloss Interior Paint, Low VOC (Formulaton #L 6048 FAI-e) | Celanese Emulsion Polymers | This formulation is for semi gloss interior paint with low VOC that contains Mowilith LDM 1852. |
