| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-Amino Propyl Vinyl Ether, APVE | BASF SE, Intermediates Division | 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal,...view more 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal, ion exchange resins, purification of waste water, flocculation, biomedical and pharmaceutical application. view less | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF SE, Intermediates Division | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...view more Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| Mowilith® DM 2 H | Celanese Emulsion Polymers | Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints wit...view more Mowilith® DM 2 H is an aqueous copolymer dispersion based on vinyl acetate and maleic acid dibutyl ester. It has both a good pigment compatibility and good pigment binding power. The emulsion is a suitable binder for the formulation of emulsion paints with excellent weather resistance for wood and other substrates (weather protection paints). The paint films do not become brittle under the influence of humidity and show good water vapour permeability. view less | |
| Mowilith® LDM 1828 | Celanese Emulsion Polymers | Mowilith® LDM 1828 is an aqueous copolymer dispersion based on vinyl acetate, vinyl esters and ethylene. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 1840 | Celanese Emulsion Polymers | Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastom...view more Mowilith® LDM 1840 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Due to its good flexibility, water resistance, compatibility with cement and pigment binding power, Mowilith® LDM 1840 is a suitable binder for elastomeric roof coatings. view less | |
| Mowilith® LDM 1852 | Celanese Emulsion Polymers | Mowilith® LDM 1852 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. This product is especially suited for the formulation of interior medium pvc latex paints of low odour without any solvents and/or plasticizers. | |
| Mowilith® LDM 1865 | Celanese Emulsion Polymers | Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and...view more Mowilith® LDM 1865 is an aqueous polymer dispersion based on vinyl acetate, ethylene and methacrylic acid esters, free of solvents and plasticizers. Mowilith® LDM 1865 is especially suitable for the formulation of exterior coating systems of low odour and without any solvents and/or plasticizers. Mowilith® LDM 1865 can also be used to formulate high quality and solvent-free interior satin paints with good block resistance. view less | |
| Mowilith® LDM 1871 | Celanese Emulsion Polymers | Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. Th...view more Mowilith® LDM 1871 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1871 is especially suited for the formulation of interior coating systems of low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1880 | Celanese Emulsion Polymers | Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and with...view more Mowilith® LDM 1880 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1880 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 1881 | Celanese Emulsion Polymers | Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and witho...view more Mowilith® LDM 1881 is a non-plasticized aqueous polymer dispersion based on vinyl acetate and ethylene. Mowilith® LDM 1881 is especially suitable for the formulation of interior coating systems like paints and resin-bound plasters with low odour and without any solvents and/or plasticizers. The fields of application cover high pvc paints with outstanding scrub resistance as well as latex paints with good anti-blocking properties. view less | |
| Mowilith® LDM 2110 | Celanese Emulsion Polymers | Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-boun...view more Mowilith® LDM 2110 is a non-plasticized aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2110 has a broad application spectrum such as interior and exterior paints, deep shade paints as well as resin-bound plasters and textured coatings. A very special possible application area is the formulation of lime finishes. view less | |
| Mowilith® LDM 2301 | Celanese Emulsion Polymers | Mowilith® LDM 2301 is an aqueous copolymer dispersion based on vinyl acetate and vinyl neodecanoate. It is a raw material for industrial use, and is stabilized in cellulose derivatives and surfactants. | |
| Mowilith® LDM 2383 | Celanese Emulsion Polymers | Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In t...view more Mowilith® LDM 2383 is non-plasticized aqueous polymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2383 is also suited for the formulation of semi gloss interior and exterior paints with a higher amount of binder. In these applications, it boasts excellent wet scrub resistance combined with high gloss levels. For the painter, it offers good rheological behaviour and ease of application. view less | |
| Mowilith® LDM 2416 | Celanese Emulsion Polymers | Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as sem...view more Mowilith® LDM 2416 is a non-plasticized and ammonia-free aqueous copolymer dispersion based on vinyl acetate and vinyl ester of versatic acid. Mowilith® LDM 2416 is especially suited for the formulation of interior and exterior paints, matt as well as semi-gloss and thixotropic paints. The semigloss paints made with this dispersion have a good gloss level and a good rheological behaviour. view less | |
| Mowilith® LDM 2454 | Celanese Emulsion Polymers | Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, ...view more Mowilith® LDM 2454 is an aqueous copolymer dispersion based on vinyl acetate, vinyl neodecanoate and (meth)acrylic acid esters. It is a raw material for the paints and coatings industry. It is used in the formulation of conventional matt interior paints, conventional latex paints, masonry paints, deep shade paints, and more. Mowilith® LDM 2454 is a multi-purpose binder with several possible application areas, especially textured coatings, and it offers exceptionally high pigment binding power. view less | |
| Mowilith® LDM 6119 | Celanese Emulsion Polymers | Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. ...view more Mowilith® LDM 6119 is a non-plasticized aqueous polymer dispersion based on styrene and an acrylic acid ester. Mowilith® LDM 6119 is a universal binder for all kinds of paints and resin-bound plasters with medium until high pigment volume concentrations. The dispersion is especially suited for those applications which have high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 6159 | Celanese Emulsion Polymers | Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP)....view more Mowilith® LDM 6159 is a non-plasticized aqueous copolymer dispersion based on acrylic acid esters and styrene. It is designed especially for the manufacture of stain-blocking primers and paints for use on wood, gypsum board or oriented strand board (OSP). Stain-blocking primers formulated with Mowilith® LDM 6159 feature good barrier properties against difficult stains such as tannin, grease or smoke in order to protect the top coat from discoloration. view less | |
| Mowilith® LDM 6482 | Celanese Emulsion Polymers | Mowilith® LDM 6482 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is also suitable for the formulation of crack-bridging and water-proof coating compounds and flexible roof coatings. | |
| Mowilith® LDM 6636 | Celanese Emulsion Polymers | Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resista...view more Mowilith® LDM 6636 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. Mowilith® LDM 6636 was especially developed as binder for the formulation of high performance ceramic tile adhesives with excellent water resistance. Such tile adhesives are important for bath rooms or kitchens, or in general such places with a high exposure to water. Usual fillers like silica or calcium carbonate may be used for the production of ceramic tile adhesives. Suitable wetting and dispersing agents are sodium hexametaphosphate or polyphosphates. view less | |
| Mowilith® LDM 6911 | Celanese Emulsion Polymers | Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially...view more Mowilith® LDM 6911 is a non-plasticized aqueous polymer dispersion based on styrene and acrylic acid esters. It is a universal binder for all kinds of solvent containing matt and semi matt paints for interior and exterior use. The dispersion is especially suited for those applications with high demands regarding water and alkali resistance. view less | |
| Mowilith® LDM 7281 | Celanese Emulsion Polymers | Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-b...view more Mowilith® LDM 7281 is a non-plasticized aqueous polymer dispersion based on acrylic and methacrylic acid esters. The usual titanium dioxide and coloured pigments as well as fillers and texturing grains may be used for the formulation of paints and resin-bound plasters. view less | |
| Mowilith® LDM 7411 | Celanese Emulsion Polymers | Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7411 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7411 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7412 | Celanese Emulsion Polymers | Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and ...view more Mowilith® LDM 7412 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7412 is especially suitable for the production of emulsion-based gloss paints with low pvc, good anti-blocking properties and low odour. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the effect of water and simultaneous mechanical stress. view less | |
| Mowilith® LDM 7416 | Celanese Emulsion Polymers | Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hard...view more Mowilith® LDM 7416 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7416 is especially suited for the production of emulsion-based gloss paints and wood stains with good surface hardness, short drying time and early block resistance, particularly important for use on doors and window frames. High hail stone resistance is a further feature of this emulsion. Paint films show a good resistance to ageing and are notable for their good wet adhesion on old oil and alkyd resin paints under the influence of water and/or simultaneous mechanical stress. view less | |
| Mowilith® LDM 7431 | Celanese Emulsion Polymers | Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with h...view more Mowilith® LDM 7431 is a copolymer emulsion of styrene, methacrylic acid esters and acrylic acid esters. Mowilith® LDM 7431 is developed to be used in anti-corrosion paints but could also be used in other solvent-free water based paints and lacquers with high demand of low blocking, low liquid water uptake, good adhesion too many substrates and early water resistance. view less | |
| Mowilith® LDM 7451 | Celanese Emulsion Polymers | Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with...view more Mowilith® LDM 7451 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters and styrene. Mowilith® LDM 7451 is a universal acrylic binder for all kinds of solvent containing wood stains and pigmented gloss paints with good scratch and block resistance. view less | |
| Mowilith® LDM 7461 | Celanese Emulsion Polymers | Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and b...view more Mowilith® LDM 7461 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. It is a useful binder to formulate water based clear and pigmented lacquers intended for industrial application and with good scratch and blocking properties. Mowilith® LDM 7461 is a fine dispersed emulsion with low viscosity and good mechanical stability. At temperatures higher than approx. 25 °C it forms a clear and hard film with a very good resistance towards grease, water and alkaline solutions. view less | |
| Mowilith® LDM 7510 | Celanese Emulsion Polymers | Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new g...view more Mowilith® LDM 7510 is an aqueous copolymer dispersion based on (meth)acrylic acid esters. It is a raw material for the paints and coatings industry where it is used to formulate glossy trim paints - interior and exterior use. Mowilith® LDM 7510 is a new generation of acrylic emulsions for glossy trim paints formulated without coalescing agents. It offers a good balance of block resistance and elasticity. view less | |
| Mowilith® LDM 7667 | Celanese Emulsion Polymers | Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on...view more Mowilith® LDM 7667 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Due to its very low particle size Mowilith® LDM 7667 is suitable for the formulation of aqueous primers with good penetration properties on porous substrates like gypsum, plasters and concrete. The dispersion may also be used as a binder for impregnating wood stains. view less | |
| Mowilith® LDM 7671 | Celanese Emulsion Polymers | Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of...view more Mowilith® LDM 7671 is a non-plasticized aqueous polymer dispersion based on (meth)acrylic acid esters and styrene. Mowilith® LDM 7671 is a relatively soft aqueous polymer dispersion which forms a film with high flexibility and low water uptake. Because of these properties Mowilith® LDM 7671 is particularly suited for the formulation of elastomeric wall coatings and crack-bridging systems. view less | |
| Mowilith® LDM 7709 | Celanese Emulsion Polymers | Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and...view more Mowilith LDM 7709 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith LDM 7709 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such masonry, deep shade paints, plasters and textured coatings. The product can be used also in combination with silicate binders after testing. The emulsion offers excellent outdoor durability and optimised dirt pick up which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7714 | Celanese Emulsion Polymers | Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on ...view more Mowilith® LDM 7714 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7714 is especially designed as a binder for high-quality exterior coatings with excellent adhesion properties, for example on old alkyd coatings or zinc plates. The special adhesion and cross-linking system of Mowilith® LDM 7714 give rise to outstanding wet adhesion in addition to low dirt-pickup. view less | |
| Mowilith® LDM 7717 | Celanese Emulsion Polymers | Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith...view more Mowilith® LDM 7717 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7717 is especially designed as a binder for resin-bound plasters, textured coatings and high-quality exterior paints. Mowilith® LDM 7717 combines low water uptake with good hardness, which translates into excellent weathering behaviour in paints, plasters and external insulation and finishing systems. view less | |
| Mowilith® LDM 7719 | Celanese Emulsion Polymers | Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, a...view more Mowilith® LDM 7719 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7719 is a pure acrylic emulsion with low MFFT designed for low VOC exterior paints such as wood coatings, deep shade paints, and masonry paints with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7722 | Celanese Emulsion Polymers | Mowilith® LDM 7722 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7722 is especially suitable as binder for masonry coatings and mid sheen paints (latex paints) with lower pvc. | |
| Mowilith® LDM 7724 | Celanese Emulsion Polymers | Mowilith® LDM 7724 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7724 is especially designed as a binder for gloss paints and low pigmented wood coatings of all kinds. | |
| Mowilith® LDM 7729 | Celanese Emulsion Polymers | Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission ...view more Mowilith® LDM 7729 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7729 is a pure acrylic emulsion with low MFFT designed for low VOC paints such as, low emission interior paints, low emission deep shade paints, and low emission masonry paints, with medium until high pigment volume concentrations. The emulsion offers excellent outdoor durability, low water uptake and good wet adhesion, which makes it the binder of choice for coalescent-free façade paint formulations. view less | |
| Mowilith® LDM 7764 | Celanese Emulsion Polymers | Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. Th...view more Mowilith® LDM 7764 is a non-plasticized aqueous copolymer dispersion based on acrylic and methacrylic acid esters. Mowilith® LDM 7764 is a useful binder to formulate water-based exterior paints for alkaline substrates such as concrete and fibre cement. The dispersion can be used with or without pigmentation. Properly formulated paints based on Mowilith® LDM 7764 will exhibit excellent resistance towards water and alkaline solutions. Such paints will also show a good weather resistance, an excellent blocking resistance and a good resistance towards efflorescence. view less | |
| Mowilith® LDM 7991 | Celanese Emulsion Polymers | Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interio...view more Mowilith® LDM 7991 is a non-plasticized aqueous copolymer dispersion based acrylic and methacrylic acid esters. Mowilith® LDM 7991 is a very hard polyacrylic dispersion and is especially suitable for the manufacture of coatings for plastics, wood (interior use) and metal (as primer). The dispersion is also suitable as combination partner to be mixed with other softer polymer dispersion to improve their hardness and block resistance, for example. However, proper compatibility tests have to be performed at any rate. The storage stability and tendency for discoloration of these mixtures must be observed carefully. view less | |
| Mowilith Nano® 9420 | Celanese Emulsion Polymers | Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed...view more Mowilith Nano® 9420 is an aqueous organosilicate hybrid dispersion which consists of a silicium dioxide component (40% relative to the solids content) and an organic copolymer based on acrylic and methacrylic acid esters. Mowilith Nano® 9420 was developed as binder for all kinds of coatings, however especially for the formulation of paints and emulsion-based plasters. view less | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...view more N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. view less | |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Ethylpyrrolidone, NEP | BASF SE, Intermediates Division | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| N-Methylethanolamine | BASF SE, Intermediates Division | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| N-Methylpyrrolidone, NMP | BASF SE, Intermediates Division | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less |
