| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies b.v.b.a. | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...view more CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. view less | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend. | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer EC 98 | Shamrock Technologies b.v.b.a. | Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...view more Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. view less | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EE 95 is an anionic, high-density synthetic wax emulsion. Hydrocer EE-95 is used in both air dry and baked coatings. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP-91 is recommened for use in water based coating systems. | |
| Neptune 1-N1 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings. | |
| Neptune 1-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based, air dry, and baked coatings. | |
| Neptune 5223 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based UV coatings. | |
| S-381-N5 (Carnauba / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | S-381-N5 is a carnauba and synthetic micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommened for powder, water-based and UV coating systems. | |
| S-390-C (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-390-C is a spherical synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder. | |
| S-394-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394 N5 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-394-SD4 (Spherical Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-394-SD4 is a spherical synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-395 N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-395-SP5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-395 SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| S-413 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | S-413 is a synthetic wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for powder coatings, wood coatings, water-based, solvent-based and UV systems | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-2 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 8.0 µm. SST®-2 is recommended for use in powder, water-based, solvent-based and UV coatings. | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is also recommened for use in water-based, solvent-based, powder, and UV coatings. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based ...view more SST®-3D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-3D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-3D is recommeneded for use in powder, water-based, solvent-based and UV coatings. view less | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in powder, water-based, solvent-based and UV coatings. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. | |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...view more SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. view less | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6005 is a cross-linked polymethyl methacrylate powder with a mean particle size of 7 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6010 is a cross-linked polymethyl methacrylate powder with a mean particle size of 10 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6014 is a cross-linked polymethyl methacrylate powder with a mean particle size of 13 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6017 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6017 is a cross-linked polymethyl methacrylate powder with a mean particle size of 19 microns. The TexMATTE Series are used in UV coatings. | |
| TexMATTE 6030 (PMMA Powder) | Shamrock Technologies b.v.b.a. | TexMATTE 6030 is a vross-linked polymethyl methacrylate powder with a mean particle size of 35 microns. The TexMATTE Series are used in UV coatings. |
