| Chisorb® 292 | DBC Europe GmbH | Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trappin...view more Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable acrylic. view less | |
| Chisorb® 523 | DBC Europe GmbH | Chisorb® 523 is a highly effective liquid light stabilizer with amino-ether function, which is different to the class of hindered amine light stabilizers preventing possible reaction with acidity filler, pigment or matrix. It provides outstanding light st...view more Chisorb® 523 is a highly effective liquid light stabilizer with amino-ether function, which is different to the class of hindered amine light stabilizers preventing possible reaction with acidity filler, pigment or matrix. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. view less | |
| Chisorb® 5392 | DBC Europe GmbH | Chisorb® 5392 is a liquid UV absorber blended with HALS, particularly developed for coatings. This yellow to light brown liquid is very soluble in most organic solvents, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5...view more Chisorb® 5392 is a liquid UV absorber blended with HALS, particularly developed for coatings. This yellow to light brown liquid is very soluble in most organic solvents, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5392 is a liquid form at room temperature, which makes it much easier for handling than other benzotriazoles UV absorbers. It's broad UV absorption offers good protection of light sensitive base coats. view less | |
| Chisorb® 5530 | DBC Europe GmbH | Chisorb® 5530 is a liquid UV absorber of the hydroxyphenylbenzotriazole class particularly developed for coatings. This yellow to light amber liquid is very soluble in most organic solvents and is dispersible in aqueous systems, which makes it particularl...view more Chisorb® 5530 is a liquid UV absorber of the hydroxyphenylbenzotriazole class particularly developed for coatings. This yellow to light amber liquid is very soluble in most organic solvents and is dispersible in aqueous systems, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5530 is a liquid form at room temperature which makes it much easier for handling than other benzotriazoles UV absorbers. Its broad UV absorption offers good protection of light sensitive base coats or substrates such as wood and plastics. view less | |
| Chisorb® 5571 | DBC Europe GmbH | Chisorb® 5571 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class. It imparts good light stability to a variety of polymers during its use. Chisorb® 5571 features high compatibility in various substrates. It offers low volatility even at high...view more Chisorb® 5571 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class. It imparts good light stability to a variety of polymers during its use. Chisorb® 5571 features high compatibility in various substrates. It offers low volatility even at high temperatures. It also exhibits high absorption and protection efficiency without imparting any yellowness to the protected substrate. Chisorb® 5571 can be applied in thermoplastic PUR, coating and integral foams, rigid and plasticized PVC, PVB, PMMA, PVDC, EVOH, EVA, hot cured unsaturated polyesters and spin finishes for PA, PET, PUR, and PP fibers. The clear viscous yellow liquid product is also suitable for latices, waxes, adhesives, styrene homo- and co-polymers, elastomers and polyolefins. view less | |
| Chisorb® 5582 | DBC Europe GmbH | Chisorb® 5582 is an ultraviolet light absorber for coatings. It belongs to the family of substituted benzotriazoles which protect against ultraviolet radiation. Chisorb® 5582 is a liquid in nature and is highly miscible in most monomers and oligomers, whi...view more Chisorb® 5582 is an ultraviolet light absorber for coatings. It belongs to the family of substituted benzotriazoles which protect against ultraviolet radiation. Chisorb® 5582 is a liquid in nature and is highly miscible in most monomers and oligomers, which makes it particular useful for automobile and industrial coatings. This product is a light yellow liquid. view less | |
| Chisorb® 593 | DBC Europe GmbH | Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for a...view more Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for acrylic resin, rubber and unsaturated polyester etc. This product appears as a light brown to yellow powder. view less | |
| Doublecure® 1172 | DBC Europe GmbH | Doublecure® 1172 is a cationic photoinitiator based on sulphonium chemistry. No detectable benzene is generated when it is utilized to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. This product i...view more Doublecure® 1172 is a cationic photoinitiator based on sulphonium chemistry. No detectable benzene is generated when it is utilized to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. This product is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. It appears as a light yellow liquid with a very faint odor. view less | |
| Doublecure® 1176 | DBC Europe GmbH | Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems an...view more Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper substrates. This yellow liquid exhibits a very faint odor. view less | |
| Doublecure® 1190 | DBC Europe GmbH | Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is id...view more Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. This product is a clear yellow to amber liquid. view less | |
| Doublecure® 173 | DBC Europe GmbH | Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, w...view more Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the olymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However its radicals are very sensitive to oxygen in the air. This product is a light yellow to clear liquid. view less | |
| Doublecure® 1819 | DBC Europe GmbH | Doublecure® 1819 is a photoinitiator for polymerization of unsaturated resins upon UV light exposure. It is suggested to be used in white pigmented formulations, the curing of glass fiber reinforced polyester/styrene systems, and for clearcoats of outdoor...view more Doublecure® 1819 is a photoinitiator for polymerization of unsaturated resins upon UV light exposure. It is suggested to be used in white pigmented formulations, the curing of glass fiber reinforced polyester/styrene systems, and for clearcoats of outdoor use in combinations with light stabilizers. With low concentrations of this white-yellowish powder, it can reach an excellent curing performance in highly opaque white and colored furniture coatings or screen inks containing titanium dioxide or colored pigments, and presents minimum yellowing after exposure to sufficient amounts of UV radiation. In addition, it allows curing of thick sections due to the outstanding absorption. view less | |
| Doublecure® 184 | DBC Europe GmbH | Doublecure® 184 is used for the application on non-yellowing UV Radiation Curing Systems. It is an alpha cleavage type photoinitiator, which combines the characteristics of high photospeed and exceptional storage life. Its non-yellowing and low-irritating...view more Doublecure® 184 is used for the application on non-yellowing UV Radiation Curing Systems. It is an alpha cleavage type photoinitiator, which combines the characteristics of high photospeed and exceptional storage life. Its non-yellowing and low-irritating properties, makes it an ideal choice for clear coatings on paper, flooring, metal, plastics and wood. Doublecure® 184, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the polymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However, its radicals are very sensitive to oxygen in the air. Doublecure® 184 is strongly recommended when non-yellowing properties are crucial. Results obtained from an outdoor exposure study show that it gives better long-term non-yellowing performance than other initiators. Furthermore, it exhibits lower sensitivity to air inhibition than Doublecure® 173 during curing. view less | |
| Doublecure® 200 | DBC Europe GmbH | Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowin...view more Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowing properties are important. This product, when irradiating with UV light, undergoes both of a homolytic and intramolecular type of breakage to generate a pair of free radicals and a bimolecular hydrogen abstraction reaction to initiate the polymerization of UV curable systems. Its photospeed acting as a photoinitiator is not as fast as Doublecure® 173 for example, but it gives better non-yellowing performance and better surface curing. This product is a light yellow and clear liquid. view less | |
| Doublecure® 369 | DBC Europe GmbH | Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in com...view more Doublecure® 369 is a highly efficient Free Radical Type I solid photoinitiator for UV-polymerization of chemically prepolymers in combination with mono-or multifunctional monomers. This pale yellow powder may be used after adequate testing alone or in combination with suitable coinitiators, e.g., Doublecure® 184, for UV curable inks and varnishes for applications on paper, metal and plastic materials. Its high absorptivity makes it especially suitable for pigmented UV-curable systems, photo resists and printing plates. view less | |
| Doublecure® 3959 | DBC Europe GmbH | Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white p...view more Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation on substrates of wood, metal, plastic and paper. view less | |
| DOUBLEMER® 127-100 | DBC Europe GmbH | DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/...view more DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. view less | |
| DOUBLEMER® 127-GP15 | DBC Europe GmbH | DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...view more DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. view less | |
| DOUBLEMER® 127-TP20 | DBC Europe GmbH | DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...view more DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. view less | |
| DOUBLEMER® 186 | DBC Europe GmbH | DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment...view more DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling and adhesion. This product is recommended for use in: clear coatings for paper, overprint varnishes, wood top coat with smooth surface, ink binder with good wetting property and adhesive applications. view less | |
| DOUBLEMER® 188 | DBC Europe GmbH | DOUBLEMER® 188 is a high functional aromatic urethane acrylate oligomer diluted with 20-25% TMPTA, which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER®188 exhibit excellent hardn...view more DOUBLEMER® 188 is a high functional aromatic urethane acrylate oligomer diluted with 20-25% TMPTA, which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER®188 exhibit excellent hardness and solvent resistance. Formulated UV/EB curable products containing DOUBLEMER® 188 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in: lithographic inks; improving cure speed, solvent resistance, and gloss; scratch resistant coating on plastic; and photo-imaginable soldier mask. view less | |
| DOUBLEMER® 193A-TF | DBC Europe GmbH | DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photo...view more DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photoimageable solder ink. DOUBLEMER® 193A-TF is toluene free. view less | |
| DOUBLEMER® 236 | DBC Europe GmbH | DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or elect...view more DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion to metals, plastics and papers. Formulated UV/EB curable products containing DOUBLEMER® 236 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommened for use in: wet lithographic inks for paper, plastics and metals; adhesion promoter for coatings on metals, plastics and paper; lithographic overprint varnishes; and post-formable inks. view less | |
| DOUBLEMER® 520N | DBC Europe GmbH | DOUBLEMER® 520N is a deca(10)-functional aliphatic urethane acrylate oligomer. It is cured via exposure to ultraviolet light and electron beam. DOUBLEMER® 520N is designed for lithographic, screen, gravure, roll and curtain coating applications. | |
| DOUBLEMER® 527 | DBC Europe GmbH | DOUBLEMER® 527 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a matting coating with anti-staining property especially for mar...view more DOUBLEMER® 527 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a matting coating with anti-staining property especially for marker pen. view less | |
| DOUBLEMER® 528 | DBC Europe GmbH | DOUBLEMER® 528 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a clear coating with anti-staining property especially for marke...view more DOUBLEMER® 528 is a hexa-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). It is used as a clear coating with anti-staining property especially for marker pen. view less | |
| DOUBLEMER® 576 | DBC Europe GmbH | DOUBLEMER® 576 is a low viscosity, hexafunctional aliphatic urethane acrylate oligomer without PETIA. DOUBLEMER® 576 is suitable for coatings, inks and adhesives that require lowered viscosity. At the same time, it improves the cured physical properties s...view more DOUBLEMER® 576 is a low viscosity, hexafunctional aliphatic urethane acrylate oligomer without PETIA. DOUBLEMER® 576 is suitable for coatings, inks and adhesives that require lowered viscosity. At the same time, it improves the cured physical properties such as hardness, curing speed and chemical resistance with reasonable toughness and flexibility compared to ordinary hexafunctional aliphatic urethane acrylate. view less | |
| DOUBLEMER® 5810 | DBC Europe GmbH | DOUBLEMER® 5810 is a decafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 5810 exhibit excellent hardness and solvent resistan...view more DOUBLEMER® 5810 is a decafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 5810 exhibit excellent hardness and solvent resistance without yellowing. view less | |
| DOUBLEMER® 6915-E | DBC Europe GmbH | DOUBLEMER® 6915-E is a 100% solid content oligomer designed for plastic coating. It shows high matting efficiency, high reactivity, excellent hardness, excellent water resistance and excellent leveling. | |
| DOUBLEMER® 6MX75-E | DBC Europe GmbH | DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coa...view more DOUBLEMER® 6MX75-E is an acrylate oligomer. It shows excellent adhesion, fast curing, low shrinkage, good aluminum powder orientation, good anti-yellowing and excellent leveling. DOUBLEMER® 6MX75-E can also be used as an adhesion promoter, to decrease coating shrinkage, and to improve matting efficiency. view less | |
| DOUBLEMER® 9136 | DBC Europe GmbH | DOUBLEMER® 9136 is a silicone acrylate which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing DOUBLEMER® 9136 will exhibit a smoo...view more DOUBLEMER® 9136 is a silicone acrylate which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing DOUBLEMER® 9136 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. view less | |
| DOUBLEMER® DI-TMPTA | DBC Europe GmbH | DOUBLEMER® Di-TMPTA is a high boiling monomeric liquid and has relative low viscosity. It is a tetrafunctional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization. This product is recommended for u...view more DOUBLEMER® Di-TMPTA is a high boiling monomeric liquid and has relative low viscosity. It is a tetrafunctional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization. This product is recommended for use in: adhesives; coatings for metal, optical, paper, PVC floor and wood; electronics for solder masks; inks for flexo, gravure, offset and screen. view less | |
| DOUBLEMER® DPHA | DBC Europe GmbH | DOUBLEMER® DPHA is a mixture of penta-acrylate and hexa-acrylate monomer. The hardness of the UV cured film will be improved if DOUBLEMER® DPHA is added into the formulation. | |
| DOUBLEMER® PETA | DBC Europe GmbH | DOUBLEMER® PETA is a multifunctional monomer which contains a mixture of tri-and tetra-acrylate. It can be used in a variety of UV curable coating where a high degree of crosslinking is requested. This product is an especially useful monomer where fast cu...view more DOUBLEMER® PETA is a multifunctional monomer which contains a mixture of tri-and tetra-acrylate. It can be used in a variety of UV curable coating where a high degree of crosslinking is requested. This product is an especially useful monomer where fast cure speed, hardness and high gloss properties are required. It can also be applied in UV/EB coatings and ink systems. view less | |
| DOUBLEMER® TMPTA | DBC Europe GmbH | DOUBLEMER® TMPTA is a trifunctional monomer which polymerizes when exposed to sources of free radicals. It is a reactive diluent compatible with a wide range of acrylated resins used in radiation curing applications. Cured films containing TMPTA provide h...view more DOUBLEMER® TMPTA is a trifunctional monomer which polymerizes when exposed to sources of free radicals. It is a reactive diluent compatible with a wide range of acrylated resins used in radiation curing applications. Cured films containing TMPTA provide hardness, good solvent and abrasion resistance and high gloss properties. This product is popular for overprint varnishes, inks and coatings. view less | |
| DOUBLEMER® TMPTMA | DBC Europe GmbH | DOUBLEMER® TMPTMA is a high boiling, relatively low viscosity liquid exhibiting a mild odor and excellent clarity. It is a highly reactive trifunctional crosslinking agent which has polymerizing characteristics similar to those of methyl methacrylate. Thi...view more DOUBLEMER® TMPTMA is a high boiling, relatively low viscosity liquid exhibiting a mild odor and excellent clarity. It is a highly reactive trifunctional crosslinking agent which has polymerizing characteristics similar to those of methyl methacrylate. This product is recommended for use in radiation cured systems such as coatings, inks, adhesive, and photoresists. It is also suitable as a modifier for rubber application. view less | |
| DOUBLEMER® TPGDA | DBC Europe GmbH | DOUBLEMER® TPGDA is a difunctional monomer with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. This grade is characterized by its low viscosity, light color, light odor and good diluent for ol...view more DOUBLEMER® TPGDA is a difunctional monomer with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. This grade is characterized by its low viscosity, light color, light odor and good diluent for oligomers. DOUBLEMER® TPGDA finds application in UV/EB ink and coating systems. It appears as a clear liquid with a bland odor. view less | |
| Doubletex OB | DBC Europe GmbH | Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following addi...view more Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following additional applications: as a whiteness mask for yellowish shelf clear coating; printing ink for security, safeguard; manufacture of fluorescent pigments/dyestuffs to reinforce the brightness; and increase deep tone for dark black and blue printing ink. view less | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...view more Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. view less | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
| Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...view more Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...view more Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...view more Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...view more Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...view more Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...view more Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. |
