| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improve...view more SCHWEGO® Foam 6303 is a defoamer and deaerator for water-based and solvent borne coating systems. This yellow liquid is silicone-free and acts - depending on the system – as defoaming and de-aerating additive. In most cases SCHWEGO® foam 6303 also improves levelling. Even at maximum level of addition SCHWEGO® foam 6303 is completely soluble in the coating systems. The elasticity of the film improves. This product can be used in solvent borne and water-based systems. In solvent borne systems SCHWEGO® foam 6303 is particularly effective as de-aerating and partially also as a levelling additive. view less | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45...view more BLISTER FREE 45 is a defoamer for solvent borne and water-based coating systems that is silicone free. It exhibits good defoaming action in the following solvent based systems: Nitrocellulose, acid-catalysed, and polyurethane. In general, BLISTER FREE 45 has a good de-aerating effect on water thinnable coatings if they are based on the following binders: polyester, acid resin, and acrylic. view less | |
| SCHWEGO® Flow 8060 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Flow 8060 is a levelling additive for solvent borne coating systems. This colourless to light yellowish liquid is silicone free and s a surface active additive, which can eliminate levelling problems in solvent containing paint systems. In conseq...view more SCHWEGO® Flow 8060 is a levelling additive for solvent borne coating systems. This colourless to light yellowish liquid is silicone free and s a surface active additive, which can eliminate levelling problems in solvent containing paint systems. In consequence of the increased smoothness of the surface SCHWEGO® flow 8060 frequently also improves the gloss. In many cases the use of SCHWEGO® flow 8060 also eliminates floatation problems. SCHWEGO® flow 8060 is used in solvent borne or solvent free coating systems. It is effective in nearly all binder systems and it is not suitable for water-based coating materials. view less | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based ...view more SCHWEGO® foam 6354 is a defoamer for water-based and solvent borne coating systems, free of VOC. It is effective in almost all solvent containing one- and multicomponent paint and coating systems. This product reduces the surface tension in solvent based and solvent free paint systems. It improves levelling, prevents cratering and showing through the substrate. view less | |
| SCHWEGO® Wett 8092 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8092 is a polymeric wetting and dispersing additive for water-based and solvent borne coating systems. This yellow, clear liquid is universally suitable for pigments in water-based and solvent borne coating systems. Milling time is shortened...view more SCHWEGO® Wett 8092 is a polymeric wetting and dispersing additive for water-based and solvent borne coating systems. This yellow, clear liquid is universally suitable for pigments in water-based and solvent borne coating systems. Milling time is shortened as pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and unmixing of the pigments, respectively floating or flooding during application, are prevented. The tinting strength of pigments is improved and the colour tone does not change even after long storage times. Schwego® Wett 8092 is compatible with most resin systems. This product can be used to disperse inorganic and organic pigments and carbon black. It is especially suitable for the production of universal pastes and highly filled systems. view less | |
| SCHWEGO® Antimec | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® antimec is a multifunctional additive for water-based and solvent borne coating systems. It is free of ketoxime and aromates and is also biodegradable. This product can be used in almost all common paint systems water based and solvent based as w...view more SCHWEGO® antimec is a multifunctional additive for water-based and solvent borne coating systems. It is free of ketoxime and aromates and is also biodegradable. This product can be used in almost all common paint systems water based and solvent based as well. Effectiveness of antiskinning may be limited in long oil alkyd systems. It is a colourless, light yellowish clear liquid. view less | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly...view more Schwego® Foam 6351 is a deaerating additive for solvent borne, water-based and solvent free coating systems. This colourless opal liquid is silicone-free and can be used in almost all solvent free and solvent containing coating systems. It is particularly effective in hammer finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, which are suitable for airless spraying. This product is also effective in aqueous industrial finishes (alkyd/melamine systems). view less | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective a...view more BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems. It is silicone free and can be used in solvent containing and water dilutable systems. In solvent containing systems BLISTER FREE 3 is particularly effective as de-aerating and partially also as a levelling agent. This applies to the following binders: alkyd, alkyd/polyester-, unsaturated polyester-, NC-, AC-, PU, and acrylic systems. BLISTER FREE 3 is also very effective in water dilutable coating systems particularly, if they are based on alkyd/acrylics, saturated polyesters and epoxyde systems. view less | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...view more BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. view less | |
| SCHWEGO® Wett 6292 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6292 is a wetting and dispersing additive for water-based and solvent borne coating systems. This clear, yellow liquid is VOC-free and can be used to disperse inorganic, organic pigments and carbon black. It is especially suitable for the pr...view more SCHWEGO® Wett 6292 is a wetting and dispersing additive for water-based and solvent borne coating systems. This clear, yellow liquid is VOC-free and can be used to disperse inorganic, organic pigments and carbon black. It is especially suitable for the production of universal pastes and highly filled systems. Additionally SCHWEGO® wett 6292 can be used in solvent-free and UV-systems. SCHWEGO® wett 6292 is a polymeric wetting and dispersing additive universally suitable for water-based and solvent borne systems. It shortens milling time, as pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and unmixing of the pigments, respectively floating or flooding during application are prevented. Colour strength of pigments improves, and the colour shade does not change after long storage time. view less | |
| SCHWEGO® Wett 8075 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocy...view more SCHWEGO® Wett 8075 is a wetting and dispersing additive for water-based and solvent borne coating systems. It is suitable for most kinds of binder systems, and it is suitable for the dispersion of inorganic but also for organic pigments, such as phthalocyanines. This product has the following typical properties for optimal pigmentation: dispersion time is reduced, depth of colour is intensified. reduction of settlement, gloss increase, reduction of floatation phenomena and improvement of levelling. view less | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6543 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. SCHWEGO® fluor 6543 possesses extremely high interfacial ...view more SCHWEGO® Fluor 6543 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. SCHWEGO® fluor 6543 possesses extremely high interfacial activity. This product reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. view less | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6536 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. This product possesses extremely high interfacial activit...view more SCHWEGO® Fluor 6536 is a highly effective wetting additive for solvent borne and water-based coating systems. It is free of PFOS and PFOA, and is based on environmental compliant C4, C6 technology. This product possesses extremely high interfacial activity. SCHWEGO® fluor 6536 reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. view less | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying ...view more BLISTER FREE 75 is a defoamer for solvent borne and water-based coating systems. This clear, light yellowish liquid is silicone free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. BLISTER FREE 75 is a product with interfacial activity, which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is improved. view less | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...view more SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. view less | |
| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocell...view more ANTIGEL® is a multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. This product is biodegradable and is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. It is composed of modified phenol derivative and methyl ethyl ketoxime (Meko) in solvent mixture with a component promoting wetting. This product is a clear to slightly turbid, light brownish liquid. view less | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigmen...view more SCHWEGO® Wett 6246 is a wetting and dispersing additive for solvent borne coating systems. It is a universal wetting and dispersing agent for solvent based and resin free systems. This product is suitable for the dispersion of organic and inorganic pigments as well as pigment concentrates. SCHWEGO® wett 6246 is especially suitable for enamels and industrial-,wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended. view less | |
| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during...view more SCHWEGO® Foam 6388 is a defoamer for solvent borne and water-based coating systems. This clear, yellow liquid is VOC-free. SCHWEGO® foam 6388 is an interfacially active additive, which influences the surface tension. Hence, the formation of bubbles during the manufacture of paint or during application is reduced to a minimum. Any bubbles formed are quickly destroyed. In general SCHWEGO® foam 6388 has beneficial effect on the flow of the paint film. view less | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Fluor 6523 is a highly effective wetting additive for solvent borne and water-based coating systems. It is biodegradable, free of PFOS, PFOA, and based on C4 technology. SCHWEGO® fluor 6523 possesses extremely high interfacial activity. In many s...view more SCHWEGO® Fluor 6523 is a highly effective wetting additive for solvent borne and water-based coating systems. It is biodegradable, free of PFOS, PFOA, and based on C4 technology. SCHWEGO® fluor 6523 possesses extremely high interfacial activity. In many solvents SCHWEGO® fluor 6523 reduces the surface tension to values of around 20 mN/m and is therefore used for wetting of non-polar substrates. Typical applications are: wetting additive for pigment pastes, prevention of floating and flooding effects, prevention of cratering, and coating of edges. view less | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate sy...view more BLISTER FREE 77 is a highly effective defoamer for solvent borne coating systems. This product is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems. Complete de-aerating is a requirement for an excellent film formation. Trapped air, pinholes can cause dirt retention and difficulties, when topcoating and polishing. Apart from these surface defects, frequently reductions in gloss and deterioration of water resistance are observed. This product reduces considerably the formation of blisters and causes intensive de-aerating and the uniform formation of the waxlayer with unsaturated polyesters. view less | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also su...view more SCHWEGO® Foam 6377 is a defoamer for water-based, solvent borne and solvent-free coating systems. This clear yellow liquid is VOC- and silicone-free. SCHWEGO® foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. It is also suitable in epoxy, PUR- and acrylate systems. Effective deaeration is required for smooth film formation. Trapped air, pinholes can cause dirt retention and difficulties when topcoating and polishing. Apart from these surface defects frequently a reduction in gloss and a deterioration in water resistance are observed. SCHWEGO® foam 6377 produces intensive defoaming and strongly reduces bubbles. Also, the even formation of the wax layer with unsaturated polyesters is promoted. SCHWEGO® foam 6377 is effective in wax containing as well as in wax free systems. view less | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. Th...view more ANTIGEL® KF is a multifunctional additive for solvent borne and water-based coating systems. It is free of ketoxime and aromates, and is also biodegradable. The multifunctionality of ANTIGEL® KF-D is based on the synergistic activity of the components. The stabilisation is based on the oxygen binding properties of the antioxidant. ANTIGEL® KF-D improves flow and through-drying. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. view less | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has...view more ANTIGEL® KF-D is a multifunctional additive for solvent borne and water-based coating systems, free of ketoxime and aromates, and biodegradable. It can be use in almost all common paint systems, both water based and solvent based as well. This product has the following properties: stabilisation of viscosity against air oxidation, prevention of skinning, improved wetting, prevention of settlement, reduction of dispersing time, reworking of thickened batches, removal of floatation phenomena, and promotion of flow and gloss. The stabilisation is based on the oxygen binding properties of the antioxidant. The wetting component of ANTIGEL® KF-D reduces the interfacial tension between the usually hydrophilic pigments and the hydrophobic binder. The pigments are well distributed resulting an optimum depth of colour. Dispersion time, floatation phenomena and sedimentation are reduced and gloss is increased. Sedimentation is largely avoided. Because of the excellent wetting, optimum depth of colour is achieved. view less |
