The service provided by the Evonik Operations GmbH, BL Silanes business is unique in the world, since scientists and engineers at Evonik are mastering the technology – their own and that of the customers. As a result of this, customers are given the best possible support in the areas of research, applied technology, and handling.
Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...view more
Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. view less
Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...view more
Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. view less
Dynasylan® M, the methyl ester of orthosilicic acid, is frequently also referred to under the name of TMOS (tetramethoxysilane). Dynasylan® M is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings.
Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more
Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less
Dynasylan® MTES is a monomeric alkylfunctional silane, possessing hydrolyzable inorganic ethoxysilyl groups and an alkyl group, that imparts hydrophobicity by the surface treatment of fillers and/or pigments. Acid or alkaline hydrolysis leads to the form...view more
Dynasylan® MTES is a monomeric alkylfunctional silane, possessing hydrolyzable inorganic ethoxysilyl groups and an alkyl group, that imparts hydrophobicity by the surface treatment of fillers and/or pigments. Acid or alkaline hydrolysis leads to the formation of silanol groups which, in a subsequent condensation reaction, can both react with the active hydroxy-groups present on the surface of an inorganic filler or pigment and can also condensate with other silanol groups to form very stable siloxane bonds (-Si-O-Si-). view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
