99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...view more 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. view less | |
99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...view more Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. view less | |
AW 300 | AB Chimica srl | AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high ...view more AW 300, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 68% of pigment type titanium dioxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 300 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 304 | AB Chimica srl | AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is ve...view more AW 304, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of blue beta copper phthalocyanine NCNF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 304 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 305 | AB Chimica srl | AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...view more AW 305, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 44% of pigment type of transparent red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 305 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 307 | AB Chimica srl | AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high...view more AW 307, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 55% of pigment type yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 307 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 308 | AB Chimica srl | AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with ...view more AW 308, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of azoic red P.R. 112. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 308 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 312 | AB Chimica srl | AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high we...view more AW 312, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 60% of pigment type red iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 312 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 320 | AB Chimica srl | AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...view more AW 320, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of arylamide yellow. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 320 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 321 | AB Chimica srl | AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wit...view more AW 321, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 45% of pigment type of dinitoaniline orange. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 321 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 336 | AB Chimica srl | AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is...view more AW 336, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type of green chlorinated copper phthalocyanine. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 336 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 341 | AB Chimica srl | AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with hi...view more AW 341, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 30% of pigment type of dioxazine violet. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 341 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 344 | AB Chimica srl | AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resista...view more AW 344, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 40% of pigment type transparent yellow iron oxide. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 344 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 390B | AB Chimica srl | AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...view more AW 390B, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 25% of pigment type of quinacridone magenta. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 390B is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
AW 397 | AB Chimica srl | AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant wi...view more AW 397, in the form of a paste, is pigment dispersion with the dispersion medium of water soluble acrylic resin, and has 35% of pigment type medium jetness black MCF. The AW 300 series is regarded as a non-yellowing acrylic resin that is very resistant with high wetting power. The high level of grinding fineness with the high concentration of pigments makes it possible to attain a very glossy finished product. AW 397 is compatible with acrylic emulsions with applications in industrial and decorative coatings, water-based inks for laminates, water-based wood stains. view less | |
Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...view more Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. view less | |
CO 500 | AB Chimica srl | CO 500, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type titanium dioxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...view more CO 500, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type titanium dioxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 500 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 504 | AB Chimica srl | CO 504, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resin...view more CO 504, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 504 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 506B | AB Chimica srl | CO 506B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 70% of pigment type medium chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester,...view more CO 506B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 70% of pigment type medium chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 506B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 507 | AB Chimica srl | CO 507, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and...view more CO 507, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 507 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 508 | AB Chimica srl | CO 508, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type manganese 2B toner. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, an...view more CO 508, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type manganese 2B toner. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 508 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 511B | AB Chimica srl | CO 511B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type molybdate orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and...view more CO 511B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type molybdate orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 511B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 512 | AB Chimica srl | CO 512, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and al...view more CO 512, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 512 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 513B | AB Chimica srl | CO 513B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type light chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, ...view more CO 513B, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 65% of pigment type light chrome yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 513B can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 520 | AB Chimica srl | CO 520, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type arylamide yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...view more CO 520, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type arylamide yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 520 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 521 | AB Chimica srl | CO 521, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 33% of pigment type dinitroaniline orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester,...view more CO 521, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 33% of pigment type dinitroaniline orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 521 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 536 | AB Chimica srl | CO 536, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalocyanine. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard re...view more CO 536, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalocyanine. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 536 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 539 | AB Chimica srl | CO 539, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type disazo yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all...view more CO 539, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type disazo yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 539 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 541 | AB Chimica srl | CO 541, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 12% of pigment type dioxazine violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and ...view more CO 541, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 12% of pigment type dioxazine violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 541 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 545 | AB Chimica srl | CO 545, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type quinacridone violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, a...view more CO 545, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type quinacridone violet. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 545 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 547 | AB Chimica srl | CO 547, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 11% of pigment type red P.R. 23. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all o...view more CO 547, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 11% of pigment type red P.R. 23. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 547 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 551 | AB Chimica srl | CO 551, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...view more CO 551, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone yellow. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 551 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 555 | AB Chimica srl | CO 555, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...view more CO 555, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 35% of pigment type benzimidazolone orange. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 555 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 556 | AB Chimica srl | CO 556, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 18% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resi...view more CO 556, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 18% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 556 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 557 | AB Chimica srl | CO 557, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 30% of pigment type DPP red. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil l...view more CO 557, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 30% of pigment type DPP red. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 557 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 560 | AB Chimica srl | CO 560, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type special tinting black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy es...view more CO 560, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 10% of pigment type special tinting black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 560 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 590 | AB Chimica srl | CO 590, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type quinacridone magenta. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, ...view more CO 590, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type quinacridone magenta. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 590 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 597 | AB Chimica srl | CO 597, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy est...view more CO 597, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 597 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 597/1760 | AB Chimica srl | CO 597/1760, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epox...view more CO 597/1760, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type medium jetness black MCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 597/1760 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 598 | AB Chimica srl | CO 598, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type tinting carbon black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy est...view more CO 598, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 20% of pigment type tinting carbon black LCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 598 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 599 | AB Chimica srl | CO 599, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type high jetness black HCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester...view more CO 599, in the form of a paste, is pigment dispersion with the dispersion medium of medium oil alkyd resin, and has 15% of pigment type high jetness black HCF. It is compatible with nitrocellulose, cyclized and chlorinated rubber, hard resins, epoxy ester, and all oil length alkyds. CO 599 can be used in virtually every system that is compatible with alkyd resins and its application is in industrial coatings compatible with all the previous binders. view less | |
CO 800 | AB Chimica srl | CO 800, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type titanium dioxide. It is compatible with two-component urethanes, a...view more CO 800, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type titanium dioxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 804 | AB Chimica srl | CO 804, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with two-co...view more CO 804, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 805 | AB Chimica srl | CO 805, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent red iron oxide. It is compatible with two-component ur...view more CO 805, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent red iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 807 | AB Chimica srl | CO 807, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 60% of pigment type yellow iron oxide. It is compatible with two-component urethanes, ...view more CO 807, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 60% of pigment type yellow iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 809 | AB Chimica srl | CO 809, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type manganese 2B toner. It is compatible with two-component urethanes,...view more CO 809, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type manganese 2B toner. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 812 | AB Chimica srl | CO 812, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type red iron oxide. It is compatible with two-component urethanes, ami...view more CO 812, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 65% of pigment type red iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 818 | AB Chimica srl | CO 818, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 50% of pigment type ultramarine blue. It is compatible with two-component urethanes, a...view more CO 818, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 50% of pigment type ultramarine blue. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 830 | AB Chimica srl | CO 830, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic yellow. It is compatible with two-component urethanes, amino...view more CO 830, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 831 | AB Chimica srl | CO 831, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type benzimidazolone yellow. It is compatible with two-component uretha...view more CO 831, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type benzimidazolone yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 832 | AB Chimica srl | CO 832, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type azoic orange. It is compatible with two-component urethanes, amino...view more CO 832, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 25% of pigment type azoic orange. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 837 | AB Chimica srl | CO 837, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type green chlorinated copper phthalocyanine. It is compatible with two...view more CO 837, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type green chlorinated copper phthalocyanine. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 839 | AB Chimica srl | CO 839, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 22% of pigment type disazo yellow. It is compatible with two-component urethanes, amin...view more CO 839, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 22% of pigment type disazo yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 841 | AB Chimica srl | CO 841, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type dioxazine violet. It is compatible with two-component urethanes, a...view more CO 841, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type dioxazine violet. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 844 | AB Chimica srl | CO 844, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent yellow iron oxide. It is compatible with two-component...view more CO 844, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 35% of pigment type transparent yellow iron oxide. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 845 | AB Chimica srl | CO 845, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type quinacridone violet. It is compatible with two-component urethanes...view more CO 845, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type quinacridone violet. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 846 | AB Chimica srl | CO 846, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic red P.R. 170. It is compatible with two-component urethanes,...view more CO 846, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 30% of pigment type azoic red P.R. 170. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 851 | AB Chimica srl | CO 851, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 15% of pigment type carmine red. It is compatible with two-component urethanes, amino ...view more CO 851, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 15% of pigment type carmine red. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 854 | AB Chimica srl | CO 854, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 44% of pigment type isoindolinone yellow. It is compatible with two-component urethane...view more CO 854, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 44% of pigment type isoindolinone yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 855 | AB Chimica srl | CO 855, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 40% of pigment type benzimidazolone orange. It is compatible with two-component uretha...view more CO 855, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 40% of pigment type benzimidazolone orange. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 856 | AB Chimica srl | CO 856, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type blue apha copper phthalocyanine NCNF. It is compatible with two-co...view more CO 856, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 18% of pigment type blue apha copper phthalocyanine NCNF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 860 | AB Chimica srl | CO 860, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type tinting black LCF. It is compatible with two-component urethanes, ...view more CO 860, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type tinting black LCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 863 | AB Chimica srl | CO 863, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 45% of pigment type bismuth vanadate yellow. It is compatible with two-component ureth...view more CO 863, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 45% of pigment type bismuth vanadate yellow. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 890 | AB Chimica srl | CO 890, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 17% of pigment type quinacridone magenta. It is compatible with two-component urethane...view more CO 890, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 17% of pigment type quinacridone magenta. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 893B | AB Chimica srl | CO 893B, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component ureth...view more CO 893B, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 897 | AB Chimica srl | CO 897, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type medium jetness black MCF. It is compatible with two-component uret...view more CO 897, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 20% of pigment type medium jetness black MCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
CO 899 | AB Chimica srl | CO 899, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component uretha...view more CO 899, in the form of a paste, is pigment dispersion with the dispersion medium of non-yellowing and non-drying short oil alkyd based on saturated fatty acids, and has 10% of pigment type high jetness black HCF. It is compatible with two-component urethanes, amino resins, short-oil alkyds, nitrocellulose, and has applications in high quality industrial coatings well-suited with the previously mentioned binders. view less | |
EP 404 | AB Chimica srl | EP 404, in the form of a paste, is pigment dispersion with the dispersion medium of epoxy resin with an epoxy equivalent of 500/, and has 20% of pigment type blue phthalocyanine epox. It is compatible with all epoxy resins, notwithstanding of the type of ...view more EP 404, in the form of a paste, is pigment dispersion with the dispersion medium of epoxy resin with an epoxy equivalent of 500/, and has 20% of pigment type blue phthalocyanine epox. It is compatible with all epoxy resins, notwithstanding of the type of catalyst used and its main applications of bi-component epoxy coatings. view less | |
EP 497 | AB Chimica srl | EP 497, in the form of a paste, is pigment dispersion with the dispersion medium of epoxy resin with an epoxy equivalent of 500/, and has 15% of pigment type medium black epox. It is compatible with all epoxy resins, notwithstanding of the type of catalys...view more EP 497, in the form of a paste, is pigment dispersion with the dispersion medium of epoxy resin with an epoxy equivalent of 500/, and has 15% of pigment type medium black epox. It is compatible with all epoxy resins, notwithstanding of the type of catalyst used and its main applications of bi-component epoxy coatings. view less | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
LOW 700 | AB Chimica srl | LOW 700, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 70% of pigment type titanium dioxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chl...view more LOW 700, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 70% of pigment type titanium dioxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 704 | AB Chimica srl | LOW 704, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed...view more LOW 704, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type blue beta copper phthalocyanine NCNF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 705 | AB Chimica srl | LOW 705, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type transparent red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stan...view more LOW 705, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type transparent red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 705B | AB Chimica srl | LOW 705B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, sta...view more LOW 705B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 707 | AB Chimica srl | LOW 707, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, ch...view more LOW 707, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 50% of pigment type yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 708 | AB Chimica srl | LOW 708, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type manganese 2B toner. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, c...view more LOW 708, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type manganese 2B toner. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 712 | AB Chimica srl | LOW 712, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlor...view more LOW 712, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 65% of pigment type red iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 720 | AB Chimica srl | LOW 720, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type arylamide yellow. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chl...view more LOW 720, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type arylamide yellow. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 721 | AB Chimica srl | LOW 721, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type dinitroanilina orange. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil...view more LOW 721, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 25% of pigment type dinitroanilina orange. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 736 | AB Chimica srl | LOW 736, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalo. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil...view more LOW 736, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type green chlorinated copper phthalo. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 741 | AB Chimica srl | LOW 741, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 10% of pigment type dioxazine violet. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chl...view more LOW 741, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 10% of pigment type dioxazine violet. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 744 | AB Chimica srl | LOW 744, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type transparent yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, s...view more LOW 744, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 35% of pigment type transparent yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 744B | AB Chimica srl | LOW 744B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, ...view more LOW 744B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent yellow iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 748B | AB Chimica srl | LOW 748B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent brown iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, s...view more LOW 748B, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 45% of pigment type transparent brown iron oxide. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 756 | AB Chimica srl | LOW 756, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with cyclized rubber, medium and long oil alkyds, linsee...view more LOW 756, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type blue alpha copper phthalocyanine NCNF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 797 | AB Chimica srl | LOW 797, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-...view more LOW 797, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type medium jetness black MCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 798 | AB Chimica srl | LOW 798, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type tinting black LCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, ch...view more LOW 798, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 20% of pigment type tinting black LCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
LOW 799 | AB Chimica srl | LOW 799, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 12% of pigment type high jetness black HCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oi...view more LOW 799, in the form of a paste, is pigment dispersion with the dispersion medium of low VOC long-oil alkyd resin, and has 12% of pigment type high jetness black HCF. It is compatible with cyclized rubber, medium and long oil alkyds, linseed oil, stand-oil, chlorinated rubber, and has applications in air drying alkyd coatings compatible with all of these binders. view less | |
Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...view more Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. view less | |
Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...view more Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. view less | |
Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...view more Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...view more Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. view less | |
Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...view more Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. view less | |
Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. |