| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | |
| AMP® | ANGUS Chemical Company | AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| B-Tough™ C2x - Epoxy Functional Toughening Agent | Croda Coatings & Polymers | B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moistur...view more B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moisture resistance. view less | |
| Crodacor™ OME FE | Croda Coatings & Polymers | Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other perf...view more Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other performance properties. It is ideal for use in a wide variety of coating applications. view less | |
| Crodamide™ Range - Anti-Tack and Anti-Blocking Additives | Croda Coatings & Polymers | Crodamide™ Range – This range of bio-based anti-tack and anti-blocking additives can be used in inks and adhesives to prevent unwanted adhesion. | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Form 100 i...view more LoVOCoat Form 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Form 100 is available as a 20% solution in Exxsol D80. view less | |
| LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Stable 1...view more LoVOCoat Stable 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Stable 100 is available as a 20% solution in water. view less | |
| Maxemul™ 5000 Series - Copolymerisable Non-Ionic Surfactant | Croda Coatings & Polymers | Maxemul™ 5000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films an...view more Maxemul™ 5000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films and electrolyte tolerance. view less | |
| Maxemul™ 6000 Series - Copolymerisable Anionic Surfactant | Croda Coatings & Polymers | Maxemul™ 6000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films an...view more Maxemul™ 6000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films and electrolyte tolerance. view less | |
| Maxemul 7101 - Polymeric Surfactant (Non-Ionic) | Croda Coatings & Polymers | Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7101 is suitable for long and medium oil alkyd emulsions. view less | |
| Maxemul 7102 - Polymeric Surfactant (Non-Ionic) | Croda Coatings & Polymers | Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7102 is suitable for medium and short oil alkyd emulsions. view less | |
| Maxemul 7201 - Polymeric Surfactant (Anionic) | Croda Coatings & Polymers | Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7201 is a versatile resin soluble surfactant. view less | |
| Maxemul 7203 - Polymeric Surfactant (Anionic) | Croda Coatings & Polymers | Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7203 is a resin miscible surfactant. view less | |
| Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less |
