B-Tough™ C2x - Epoxy Functional Toughening Agent | Croda Coatings & Polymers | B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moistur...view more B-Tough™ C2x is an epoxy functional toughening agent for the coatings market to formulate epoxy systems with enhanced flexibility while hardness is maintained. B-Tough™ C2x is available in an easy to use, liquid form and provides good chemical and moisture resistance. view less | |
Crodacor™ OME FE | Croda Coatings & Polymers | Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other perf...view more Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other performance properties. It is ideal for use in a wide variety of coating applications. view less | |
Crodamide™ Range - Anti-Tack and Anti-Blocking Additives | Croda Coatings & Polymers | Crodamide™ Range – This range of bio-based anti-tack and anti-blocking additives can be used in inks and adhesives to prevent unwanted adhesion. | |
LoVOCoat Form 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Form 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Form 100 i...view more LoVOCoat Form 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Form 100 is available as a 20% solution in Exxsol D80. view less | |
LoVOCoat Stable 100 - Polymeric Surfactant | Croda Coatings & Polymers | LoVOCoat Stable 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Stable 1...view more LoVOCoat Stable 100 provides you with the ability to formulate solvent borne alkyd resins into high quality VOC compliant trim paints, varnishes and stains. LoVOCoat allows the incorporation of water as a partial hydrocarbon replacement. LoVOCoat Stable 100 is available as a 20% solution in water. view less | |
Maxemul™ 5000 Series - Copolymerisable Non-Ionic Surfactant | Croda Coatings & Polymers | Maxemul™ 5000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films an...view more Maxemul™ 5000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films and electrolyte tolerance. view less | |
Maxemul™ 6000 Series - Copolymerisable Anionic Surfactant | Croda Coatings & Polymers | Maxemul™ 6000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films an...view more Maxemul™ 6000 series – This range of copolymerisable, non-migratory, non-ionic surfactants have end applications in emulsion polymerisation and as binders for coatings. They offer excellent emulsion stability, excellent mositure resistance in dry films and electrolyte tolerance. view less | |
Maxemul 7101 - Polymeric Surfactant (Non-Ionic) | Croda Coatings & Polymers | Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7101 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7101 is suitable for long and medium oil alkyd emulsions. view less | |
Maxemul 7102 - Polymeric Surfactant (Non-Ionic) | Croda Coatings & Polymers | Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film prop...view more Maxemul 7102 - Non-ionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7102 is suitable for medium and short oil alkyd emulsions. view less | |
Maxemul 7201 - Polymeric Surfactant (Anionic) | Croda Coatings & Polymers | Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7201 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7201 is a versatile resin soluble surfactant. view less | |
Maxemul 7203 - Polymeric Surfactant (Anionic) | Croda Coatings & Polymers | Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film proper...view more Maxemul 7203 - Anionic polymeric surfactant which gives you the ability to formulate water borne alkyd resins for zero VOC, high quality trim paints, varnishes and stains. This surfactant provides coatings with excellent durability and the dry film properties of a conventional solvent borne alkyd. Maxemul 7203 is a resin miscible surfactant. view less | |
Maxemul™ 9107 – A Versatile Emulsifier for VOC Free Epoxy Emulsions | Croda Coatings & Polymers | Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film ...view more Maxemul™ 9107 is a non-ionic versatile polymeric surfactant to formulate VOC free solid, liquid and blended epoxy resin O/W emulsions. Emulsions based on Maxemul™ 9107 bring excellent tropical storage stability and there is no negative effect on dry film properties. Its versatility makes it suitable for floor coatings, wall paints and direct-to-metal applications. view less | |
Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less | Request Sample |
ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less | Request Sample |