| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-Amino Propyl Vinyl Ether, APVE | BASF SE, Intermediates Division | 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal,...view more 3-Amino Propyl Vinyl Ether, APVE is a Monomer for amine functional copolymer. Copolymers with a content of 0.5 to 10% by weight of the APVE have good reactivity. Polymeric amines are useful for textile auxiliaries, paper fabrication, trapping heavy metal, ion exchange resins, purification of waste water, flocculation, biomedical and pharmaceutical application. view less | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| CP-4104 MI | Kuraray Europe GmbH | CP-4104 MI is a polyvinyl alcohol that is suitable for melt molding. Based on special technologies, a pelletized polyvinyl alcohol can be processed with conventional plastic technology, such as blown and flat film extrusion and injection molding. | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF SE, Intermediates Division | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| EXCEVAL™ AQ-4104 | Kuraray Europe GmbH | EXCEVAL™ AQ-4104 is a fully hydrolyzed grade of water soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | |
| EXCEVAL™ HR-3010 | Kuraray Europe GmbH | EXCEVAL™ HR-3010 is a super hydrolyzed grade of water soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | |
| EXCEVAL™ RS-1717 | Kuraray Europe GmbH | EXCEVAL™ RS-1717 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| EXCEVAL™ RS-2117 | Kuraray Europe GmbH | EXCEVAL™ RS-2117 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...view more Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
| KURARAY POLYOL C-1090 | Kuraray Europe GmbH | KURARAY POLYOL C-1090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL C-2090 | Kuraray Europe GmbH | KURARAY POLYOL C-2090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL C-3090 | Kuraray Europe GmbH | KURARAY POLYOL C-3090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1010 | Kuraray Europe GmbH | KURARAY POLYOL P-1010 is a low viscosity and non-crystalline polyester polyol that supports project such as two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of pol...view more KURARAY POLYOL P-1010 is a low viscosity and non-crystalline polyester polyol that supports project such as two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-1011 | Kuraray Europe GmbH | KURARAY POLYOL P-1011 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1012 | Kuraray Europe GmbH | KURARAY POLYOL P-1012 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1020 | Kuraray Europe GmbH | KURARAY POLYOL P-1020 is a polyester polyol of MPD terephthalate that is suitable for: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2010 | Kuraray Europe GmbH | KURARAY POLYOL P-2010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-2010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-2011 | Kuraray Europe GmbH | KURARAY POLYOL P-2011 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2012 | Kuraray Europe GmbH | KURARAY POLYOL P-2012 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2020 | Kuraray Europe GmbH | KURARAY POLYOL P-2020 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-3010 | Kuraray Europe GmbH | KURARAY POLYOL P-3010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-3010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-4010 | Kuraray Europe GmbH | KURARAY POLYOL P-4010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-4010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-5010 | Kuraray Europe GmbH | KURARAY POLYOL P-5010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-5010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POVAL® 10-98 | Kuraray Europe GmbH | KURARAY POVAL® 10-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 10-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 9.0 - 11.0 mPa.s. view less | |
| KURARAY POVAL® 13-88 | Kuraray Europe GmbH | KURARAY POVAL® 13-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 13-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 11.5 - 14.5 mPa.s. view less | |
| KURARAY POVAL® 15-99 | Kuraray Europe GmbH | KURARAY POVAL® 15-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 15-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 12.5 - 17.5 mPa.s. view less | |
| KURARAY POVAL® 17-94 | Kuraray Europe GmbH | KURARAY POVAL® 17-94 is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in pa...view more KURARAY POVAL® 17-94 is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 14.5 - 18.5 mPa.s. view less | |
| KURARAY POVAL® 18-88 | Kuraray Europe GmbH | KURARAY POVAL® 18-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 18-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 16.5 - 19.8 mPa.s. view less | |
| KURARAY POVAL® 18-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 18-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 18-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 16.5 - 19.8 mPa.s. view less | |
| KURARAY POVAL® 20-98 | Kuraray Europe GmbH | KURARAY POVAL® 20-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 20-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 18.5 - 21.5 mPa.s. view less | |
| KURARAY POVAL® 22-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 22-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 22-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 22-88 SB | Kuraray Europe GmbH | KURARAY POVAL® 22-88 SB is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in...view more KURARAY POVAL® 22-88 SB is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 23-88 | Kuraray Europe GmbH | KURARAY POVAL® 23-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 23-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 23-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 23-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 23-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 25-88 KL | Kuraray Europe GmbH | KURARAY POVAL® 25-88 KL is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments i...view more KURARAY POVAL® 25-88 KL is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 25-98 R | Kuraray Europe GmbH | KURARAY POVAL® 25-98 R is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in...view more KURARAY POVAL® 25-98 R is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 26-80 | Kuraray Europe GmbH | KURARAY POVAL® 26-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 26-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.0 - 31.0 mPa.s. view less | |
| KURARAY POVAL® 26-88 | Kuraray Europe GmbH | KURARAY POVAL® 26-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 26-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 24.5 - 27.5 mPa.s. view less | |
| KURARAY POVAL® 28-88 K | Kuraray Europe GmbH | KURARAY POVAL® 28-88 K is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in ...view more KURARAY POVAL® 28-88 K is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 25.0 - 31.0 mPa.s. view less | |
| KURARAY POVAL® 28-99 | Kuraray Europe GmbH | KURARAY POVAL® 28-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 28-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 26.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 28-99 LA | Kuraray Europe GmbH | KURARAY POVAL® 28-99 LA is a low ash grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in ...view more KURARAY POVAL® 28-99 LA is a low ash grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 26.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 3-80 | Kuraray Europe GmbH | KURARAY POVAL® 3-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 2.8 - 3.3 mPa.s. view less | |
| KURARAY POVAL® 3-83 | Kuraray Europe GmbH | KURARAY POVAL® 3-83 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-83 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 2.5 - 3.5 mPa.s. view less | |
| KURARAY POVAL® 3-85 | Kuraray Europe GmbH | KURARAY POVAL® 3-85 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-85 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 3.4 - 4.0 mPa.s. view less | |
| KURARAY POVAL® 3-85 S4 | Kuraray Europe GmbH | KURARAY POVAL® 3-85 S4 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments ...view more KURARAY POVAL® 3-85 S4 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 3.4 - 4.0 mPa.s. view less | |
| KURARAY POVAL® 3-86 SD | Kuraray Europe GmbH | KURARAY POVAL® 3-86 SD is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in...view more KURARAY POVAL® 3-86 SD is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 2.4 - 3.40 mPa.s. view less | |
| KURARAY POVAL® 3-88 | Kuraray Europe GmbH | KURARAY POVAL® 3-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 3.2 - 3.6 mPa.s. view less | |
| KURARAY POVAL® 3-98 | Kuraray Europe GmbH | KURARAY POVAL® 3-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigment...view more KURARAY POVAL® 3-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 3.2 - 3.8 mPa.s. view less | |
| KURARAY POVAL® 30-75 | Kuraray Europe GmbH | KURARAY POVAL® 30-75 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 30-75 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 28.0 - 33.0 mPa.s. view less |
