| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...view more Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. view less | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...view more Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. view less | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...view more Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. view less | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...view more Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. view less | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...view more Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. view less | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...view more Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. view less | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...view more Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. view less | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...view more Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. view less | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...view more Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). view less | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...view more BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. view less | |
| CP-4104 MI | Kuraray Europe GmbH | CP-4104 MI is a polyvinyl alcohol that is suitable for melt molding. Based on special technologies, a pelletized polyvinyl alcohol can be processed with conventional plastic technology, such as blown and flat film extrusion and injection molding. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...view more Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. view less | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...view more CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. view less | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...view more Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. view less | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...view more Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. view less | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...view more Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. view less | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...view more Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. view less | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...view more Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. view less | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...view more Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. view less | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...view more Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. view less | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...view more Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. view less | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...view more Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. view less | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...view more Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. view less | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...view more Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. view less | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...view more Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. view less | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...view more Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. view less | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...view more Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. view less | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...view more Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. view less | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...view more Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. view less | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...view more Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. view less | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...view more Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. view less | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...view more Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. view less | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...view more Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. view less | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...view more Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. view less | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...view more Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. view less | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...view more Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. view less | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...view more Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...view more Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...view more Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...view more Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. view less | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...view more Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. view less | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...view more Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. view less | |
| EXCEVAL™ AQ-4104 | Kuraray Europe GmbH | EXCEVAL™ AQ-4104 is a fully hydrolyzed grade of water soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | |
| EXCEVAL™ HR-3010 | Kuraray Europe GmbH | EXCEVAL™ HR-3010 is a super hydrolyzed grade of water soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | |
| EXCEVAL™ RS-1717 | Kuraray Europe GmbH | EXCEVAL™ RS-1717 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| EXCEVAL™ RS-2117 | Kuraray Europe GmbH | EXCEVAL™ RS-2117 is a water soluble polymer that provides good water resistance and sufficient viscosity stability of its aqueous solution. | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...view more Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. view less | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...view more Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. view less | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...view more Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. view less | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...view more KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. view less | |
| Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...view more Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. view less | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...view more KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. view less | |
| KURARAY POLYOL C-1090 | Kuraray Europe GmbH | KURARAY POLYOL C-1090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL C-2090 | Kuraray Europe GmbH | KURARAY POLYOL C-2090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL C-3090 | Kuraray Europe GmbH | KURARAY POLYOL C-3090 is a liquid polycarbonate polyol that supports projects such as high-end leather coating, chemical-resistant PU, cracking-less / blooming-less hard coat, brand new urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1010 | Kuraray Europe GmbH | KURARAY POLYOL P-1010 is a low viscosity and non-crystalline polyester polyol that supports project such as two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of pol...view more KURARAY POLYOL P-1010 is a low viscosity and non-crystalline polyester polyol that supports project such as two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-1011 | Kuraray Europe GmbH | KURARAY POLYOL P-1011 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1012 | Kuraray Europe GmbH | KURARAY POLYOL P-1012 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-1020 | Kuraray Europe GmbH | KURARAY POLYOL P-1020 is a polyester polyol of MPD terephthalate that is suitable for: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2010 | Kuraray Europe GmbH | KURARAY POLYOL P-2010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-2010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-2011 | Kuraray Europe GmbH | KURARAY POLYOL P-2011 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2012 | Kuraray Europe GmbH | KURARAY POLYOL P-2012 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-2020 | Kuraray Europe GmbH | KURARAY POLYOL P-2020 is a liquid polyester polyol that supports your new projects of: powerful adhesive agent, tough but soft PU, new type of urethane emulsion, and flexible urethane acrylate. | |
| KURARAY POLYOL P-3010 | Kuraray Europe GmbH | KURARAY POLYOL P-3010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-3010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-4010 | Kuraray Europe GmbH | KURARAY POLYOL P-4010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-4010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POLYOL P-5010 | Kuraray Europe GmbH | KURARAY POLYOL P-5010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification...view more KURARAY POLYOL P-5010 is a low viscosity and non-crystalline polyester polyol that supports your new projects of: two components PU with low/less VOC, clear & transparent coating, soft TPU without plasticizer, flexible urethane acrylate, and modification of polyester resin. view less | |
| KURARAY POVAL® 10-98 | Kuraray Europe GmbH | KURARAY POVAL® 10-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 10-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 9.0 - 11.0 mPa.s. view less | |
| KURARAY POVAL® 13-88 | Kuraray Europe GmbH | KURARAY POVAL® 13-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 13-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 11.5 - 14.5 mPa.s. view less | |
| KURARAY POVAL® 15-99 | Kuraray Europe GmbH | KURARAY POVAL® 15-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 15-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 12.5 - 17.5 mPa.s. view less | |
| KURARAY POVAL® 17-94 | Kuraray Europe GmbH | KURARAY POVAL® 17-94 is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in pa...view more KURARAY POVAL® 17-94 is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 14.5 - 18.5 mPa.s. view less | |
| KURARAY POVAL® 18-88 | Kuraray Europe GmbH | KURARAY POVAL® 18-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 18-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 16.5 - 19.8 mPa.s. view less | |
| KURARAY POVAL® 18-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 18-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 18-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 16.5 - 19.8 mPa.s. view less | |
| KURARAY POVAL® 20-98 | Kuraray Europe GmbH | KURARAY POVAL® 20-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 20-98 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 18.5 - 21.5 mPa.s. view less | |
| KURARAY POVAL® 22-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 22-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 22-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 22-88 SB | Kuraray Europe GmbH | KURARAY POVAL® 22-88 SB is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in...view more KURARAY POVAL® 22-88 SB is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 23-88 | Kuraray Europe GmbH | KURARAY POVAL® 23-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 23-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 23-88 S2 | Kuraray Europe GmbH | KURARAY POVAL® 23-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments...view more KURARAY POVAL® 23-88 S2 is a fine powder grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.5 - 24.5 mPa.s. view less | |
| KURARAY POVAL® 25-88 KL | Kuraray Europe GmbH | KURARAY POVAL® 25-88 KL is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments i...view more KURARAY POVAL® 25-88 KL is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 25-98 R | Kuraray Europe GmbH | KURARAY POVAL® 25-98 R is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in...view more KURARAY POVAL® 25-98 R is a specialty grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 20.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 26-80 | Kuraray Europe GmbH | KURARAY POVAL® 26-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 26-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 21.0 - 31.0 mPa.s. view less | |
| KURARAY POVAL® 26-88 | Kuraray Europe GmbH | KURARAY POVAL® 26-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pi...view more KURARAY POVAL® 26-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 24.5 - 27.5 mPa.s. view less | |
| KURARAY POVAL® 28-88 K | Kuraray Europe GmbH | KURARAY POVAL® 28-88 K is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in ...view more KURARAY POVAL® 28-88 K is a defoamed grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 25.0 - 31.0 mPa.s. view less | |
| KURARAY POVAL® 28-99 | Kuraray Europe GmbH | KURARAY POVAL® 28-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigmen...view more KURARAY POVAL® 28-99 is a fully saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 26.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 28-99 LA | Kuraray Europe GmbH | KURARAY POVAL® 28-99 LA is a low ash grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in ...view more KURARAY POVAL® 28-99 LA is a low ash grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 26.0 - 30.0 mPa.s. view less | |
| KURARAY POVAL® 3-80 | Kuraray Europe GmbH | KURARAY POVAL® 3-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 2.8 - 3.3 mPa.s. view less | |
| KURARAY POVAL® 3-83 | Kuraray Europe GmbH | KURARAY POVAL® 3-83 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pig...view more KURARAY POVAL® 3-83 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with defined grain size. The KURARAY POVAL® is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. This product has a viscosity of 2.5 - 3.5 mPa.s. view less |
