| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...view more CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). view less | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...view more CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...view more CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. view less | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...view more CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. view less | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...view more R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. view less | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...view more R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...view more R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. view less | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...view more R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. view less | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...view more R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. view less | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...view more R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. view less | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...view more SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less |
