1-Methoxy-2-Propylacetate (1,2-Propandiolmonomethyletheracetat, 2-Methoxy-1-methylethylacetat, Essigsäuremethoxypropylester, Essigsäure-1-methoxy-2-propylester, Propylenglycolmonomethyletheracetat, MPA, PMA) is a clear liquid with an ether-like odor.
2-Butanol (Butan-2-ol, sec-Butanol, Butanol-2, sec-Butylalkohol, Ethylmethylcarbinol, Butylenhydrat) is a colorless liquid, with a characteristic odor.
2-Butoxyethanol (Ethylenglycolmonobutylether, Butylglycol, Butyl CELLOSOLVE, 1-Butoxy-2-hydroxyethan, Ethylenglycolbutylether, EGBE) is a colorless liquid with a mild odor.
2-Ethyl-1-Hexanol (2-Ethylhexanol, 2-Ethylhexylalkohol, Isooctan-1-ol, 1-Isooctanol, iso-Caprylalkohol, 2-Ethylhexan-1-ol, Isooctylalkohol) is a colorless, clear liquid with a sweetish odor.
4-Hydroxybenzoic Acid (PHBS, 4HBA, p-OHB, p-Hydroxybenzoesäure, para-Hydroxybenzoesäure, p-Salicylsäure, p-Oxybenzoesäure, p-Hydroxybenzoesäure) is a white solid with no odor.
Acetic Acid Ca. 60% (Acetoxylsäure, Äthansäure, Eisessig, Ethoxylsäure, Ethansäure, Methylcarbonsäure, Methancarbonsäure, Holzsäure, Säureessig) is a colorless liquid with a product specific odor.
Aluminium Sulfate-14-Hydrate Powder (Aluminum sulfate tetradecahydrate; Aluminum sulfate (Al2(SO4)3) hydrate) is a colorless solid with almost no odor.
Ammonia Solution 24.5% (Ammoniaklösung, Ammoniakwasser, Ammoniaklauge, kaustisches Ammoniak, Salmiakgeist, Hirschhorngeist. Ätzammoniak, Ammoniumhydrat) is a colorless liquid with an ammonia-like odor.
Ammonium Chloride (Salmiac, NH4CL, Nitrogen-Standard, Ammonium chloride, Ammonia Standard, Ammonium Nitrogen) is a white solid with a characteristic odor.
Benzaldehyde (Benzencarbaldehyd (IUPAC), Benzolcarbaldehyd, Phenylmethanal, künstliches Bittermandelöl) is a colorless to slightly yellow liquid with a bitter almond-like odor.
Butyldiglycol (Diethylenglykolmonobutylether, 2-(2-Butoxyethoxy)ethanol, Butoxydiethylenglycol, Butoxydiglycol, Diethylenglycolbutylether, BDG) is a colorless liquid with a characteristic odor.
Butyldiglycol Acetate (2-(2-Butoxyethoxy)ethyl acetate, 1-acetoxy-2-(2-butoxy-ethoxy)-ethane, 2-(2-butoxyethoxy)-ethanoacetate) is a colorless liquid with a mild odor.
Butylglycol Acetate (Ethylenglycolmonobutyletheracetat, Butylglycolacetat, Glycolmonobutyletheracetat, 2-Butoxyethanolacetat, EGBEA) is a colorless liquid with an ester-like odor.
Calcium Hydroxide FG E 526 (Calciumdihydroxid, gelöschter Kalk, Marmorkalkhydrat, Kalkwasser, Kalkmilch, Calciumlauge) is a white to beige powder with an earthy odor.
Citric Oil (D-Limonene) (Citrusterpene, 1-Methyl-4-prop-1-en-2-yl-cyclohexen, Carven, 1-Methyl-4-isopropenyl-1-cyclohexen) is a colorless to slightly yellow liquid with a lemon scent.
Diammoniumphosphat Wasserfrei Pulver (ammoniummonohydrogenorthophosphate, diammoniumacidphosphate, diammonium, Ammonium Hydrogenphosphate) is an odorless white powder.
Diethanol Amine 99% (Dihydroxydiethylamin, 2,2'-Iminodiethanol, Aminodiethanol, Bishydroxyethylamin, DEA) is a colorless viscous liquid with an ammonia-like odor.
DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...view more
DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more
DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more
DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more
DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less
DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions
DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...view more
DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. view less
DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...view more
DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. view less
DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations
DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature.
DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more
DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less
DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided.
DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed.
DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed.
DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability.
DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided.
DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...view more
DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more
DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...view more
DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less
DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.
DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more
DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more
DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less
EDTA-(Na4)-Solution Min. 39% (Tetranatriumethylendiamintetraacetat, Tetranatriumethylendiamintetra-acetat, Ethylendiamintetraessigsäure, Tetranatriumsalz, Ethylendinitrilotetraessigsäure, N,N'-Ethylendiamindiessigsäure) is an odorless, yellowish liquid.
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
