| 1-Methoxy-2-Propanol | Büfa Chemikalien GmbH & Co.KG | 1-Methoxy-2-Propanol (Propylenglycol-1-methylether, 1-Methoxypropan-2-ol) is a colorless liquid with an ether-like odor. | |
| 1-Methoxy-2-Propylacetate | Büfa Chemikalien GmbH & Co.KG | 1-Methoxy-2-Propylacetate (1,2-Propandiolmonomethyletheracetat, 2-Methoxy-1-methylethylacetat, Essigsäuremethoxypropylester, Essigsäure-1-methoxy-2-propylester, Propylenglycolmonomethyletheracetat, MPA, PMA) is a clear liquid with an ether-like odor. | |
| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...view more 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. view less | |
| 2-Butanol | Büfa Chemikalien GmbH & Co.KG | 2-Butanol (Butan-2-ol, sec-Butanol, Butanol-2, sec-Butylalkohol, Ethylmethylcarbinol, Butylenhydrat) is a colorless liquid, with a characteristic odor. | |
| 2-Butoxyethanol | Büfa Chemikalien GmbH & Co.KG | 2-Butoxyethanol (Ethylenglycolmonobutylether, Butylglycol, Butyl CELLOSOLVE, 1-Butoxy-2-hydroxyethan, Ethylenglycolbutylether, EGBE) is a colorless liquid with a mild odor. | |
| 2-Ethyl-1-Hexanol | Büfa Chemikalien GmbH & Co.KG | 2-Ethyl-1-Hexanol (2-Ethylhexanol, 2-Ethylhexylalkohol, Isooctan-1-ol, 1-Isooctanol, iso-Caprylalkohol, 2-Ethylhexan-1-ol, Isooctylalkohol) is a colorless, clear liquid with a sweetish odor. | |
| 2-Ethylhexanoic Acid | Büfa Chemikalien GmbH & Co.KG | 2-Ethylhexanoic Acid (2-Ethylcapronsäure, a-Ethylhexansäure, 2-EHA) is a colorless liquid with a weak odor. | |
| 4-Hydroxybenzoic Acid | Büfa Chemikalien GmbH & Co.KG | 4-Hydroxybenzoic Acid (PHBS, 4HBA, p-OHB, p-Hydroxybenzoesäure, para-Hydroxybenzoesäure, p-Salicylsäure, p-Oxybenzoesäure, p-Hydroxybenzoesäure) is a white solid with no odor. | |
| Acetic Acid Ca. 60% | Büfa Chemikalien GmbH & Co.KG | Acetic Acid Ca. 60% (Acetoxylsäure, Äthansäure, Eisessig, Ethoxylsäure, Ethansäure, Methylcarbonsäure, Methancarbonsäure, Holzsäure, Säureessig) is a colorless liquid with a product specific odor. | |
| Acetone | Büfa Chemikalien GmbH & Co.KG | Acetone (Propanon, Propan-2-on, 2-Propanon, Dimethylketon, Spiritus pyroaceticus) is a clear liquid with an aromatic odor. | |
| Adipic Acid | Büfa Chemikalien GmbH & Co.KG | Adipic Acid (1,6-Hexandisäure, 1,4-Butandicarbonsäure, 1,4-Dicarboxylbutan, E 355) is an odorless white powder. | |
| Aluminium Sulfate-14-Hydrate Powder | Büfa Chemikalien GmbH & Co.KG | Aluminium Sulfate-14-Hydrate Powder (Aluminum sulfate tetradecahydrate; Aluminum sulfate (Al2(SO4)3) hydrate) is a colorless solid with almost no odor. | |
| Ammonia Solution 24.5% | Büfa Chemikalien GmbH & Co.KG | Ammonia Solution 24.5% (Ammoniaklösung, Ammoniakwasser, Ammoniaklauge, kaustisches Ammoniak, Salmiakgeist, Hirschhorngeist. Ätzammoniak, Ammoniumhydrat) is a colorless liquid with an ammonia-like odor. | |
| Ammonium Carbonate | Büfa Chemikalien GmbH & Co.KG | Ammonium Carbonate (kohlensaures Ammonium, Hirschhornsalz, E 503i, Diammoniumcarbonat) is a white crystalline powder with an ammonia-like odor. | |
| Ammonium Chloride | Büfa Chemikalien GmbH & Co.KG | Ammonium Chloride (Salmiac, NH4CL, Nitrogen-Standard, Ammonium chloride, Ammonia Standard, Ammonium Nitrogen) is a white solid with a characteristic odor. | |
| Ammonium Hydrogen Difluoride | Büfa Chemikalien GmbH & Co.KG | Ammonium Hydrogen Difluoride (Ammoniumbifluorid, Ambi) comes in the form of white flakes with a pungent odor. | |
| Ammonium Sulfate | Büfa Chemikalien GmbH & Co.KG | Ammonium Sulfate (di-Ammoniumsulfat, Ammonsulfat, schwefelsaures Ammonium, schwefelsaurer Ammoniak, E 517) is an odorless, white crystalline. | |
| Ammoniumpersulfat Mit 0.5% Aerosil | Büfa Chemikalien GmbH & Co.KG | Ammoniumpersulfat Mit 0.5% Aerosil (Ammoniumperoxodisulfat) is an odorless, white to slightly yellow crystalline powder. | |
| Barium Sulfate | Büfa Chemikalien GmbH & Co.KG | Barium Sulfate (Schwerspat) is a white odorless powder. | |
| Benzaldehyde | Büfa Chemikalien GmbH & Co.KG | Benzaldehyde (Benzencarbaldehyd (IUPAC), Benzolcarbaldehyd, Phenylmethanal, künstliches Bittermandelöl) is a colorless to slightly yellow liquid with a bitter almond-like odor. | |
| Benzin 100-140 | Büfa Chemikalien GmbH & Co.KG | Benzin 100-140 (Petroleumbenzin, Naphtha, petroleum ether) is a colorless liquid with a paraffin-like odor. | |
| Benzin 145-200 (K30) | Büfa Chemikalien GmbH & Co.KG | Benzin 145-200 (K30) (Ligoin, Hexanes,N-Hexanes) is a colorless liquid with a petrol-like odor. | |
| Benzin 40-65 | Büfa Chemikalien GmbH & Co.KG | Benzin 40-65 (Petroleumbenzin, Naphtha, petroleum ether) is a colorless liquid with a petrol-like odor. | |
| Benzin 60-95 | Büfa Chemikalien GmbH & Co.KG | Benzin 60-95 is a colorless liquid with a solvent-like odor. | |
| Benzin 80-110 | Büfa Chemikalien GmbH & Co.KG | Benzin 80-110 is a clear liquid with a mild odor. | |
| Benzyl Alcohol | Büfa Chemikalien GmbH & Co.KG | Benzyl Alcohol (Phenylmethanol, Phenylcarbinol, E 1519, BnOH) is a colorless liquid with a slightly aromatic odor. | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...view more Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. view less | |
| Borsäure Granulat | Büfa Chemikalien GmbH & Co.KG | Borsa¨ure Granulat (Orthoborsäure, Borofax, Trihydrogenborat) is supplied as an odorless, white granule. | |
| Butandiol 1.4- | Büfa Chemikalien GmbH & Co.KG | Butandiol 1.4 is a colorless to white liquid with no odor. | |
| Butanediol 1.3- | Büfa Chemikalien GmbH & Co.KG | Butanediol 1.3- (Butan-1,3-diol, 1,3-BG, 1,3-Butylenglycol) is a colorless liquid with a slight, product specific smell. | |
| Butyl Acetate | Büfa Chemikalien GmbH & Co.KG | Butyl Acetate (Essigsäure-n-butylester, Butylethanoat, n-Butylacetat) is a colorless liquid with an ether-like odor. | |
| Butyldiglycol | Büfa Chemikalien GmbH & Co.KG | Butyldiglycol (Diethylenglykolmonobutylether, 2-(2-Butoxyethoxy)ethanol, Butoxydiethylenglycol, Butoxydiglycol, Diethylenglycolbutylether, BDG) is a colorless liquid with a characteristic odor. | |
| Butyldiglycol Acetate | Büfa Chemikalien GmbH & Co.KG | Butyldiglycol Acetate (2-(2-Butoxyethoxy)ethyl acetate, 1-acetoxy-2-(2-butoxy-ethoxy)-ethane, 2-(2-butoxyethoxy)-ethanoacetate) is a colorless liquid with a mild odor. | |
| Butylglycol Acetate | Büfa Chemikalien GmbH & Co.KG | Butylglycol Acetate (Ethylenglycolmonobutyletheracetat, Butylglycolacetat, Glycolmonobutyletheracetat, 2-Butoxyethanolacetat, EGBEA) is a colorless liquid with an ester-like odor. | |
| Butyltriglycol | Büfa Chemikalien GmbH & Co.KG | Butyltriglycol (2-(2-(2-Butoxyethoxy)ethoxy)ethanol;Triglykolmonobutylether, Butoxytriglykol) is an odorless, colorless liquid. | |
| Calcium Chloride Anhydrous Prills | Büfa Chemikalien GmbH & Co.KG | Calcium Chloride Anhydrous Prills (Calciumchlorid) is an odorless white solid. | |
| Calcium Chloride Solution 34% Feeding Material (GMP+) | Büfa Chemikalien GmbH & Co.KG | Calcium Chloride Solution 34% Feeding Material (GMP+) (Kalziumchlorid, E 509) is an odorless, colorless liquid. | |
| Calcium Formiate | Büfa Chemikalien GmbH & Co.KG | Calcium Formiate (Calciumdiformiat, Calciummethanoat, E 238) is a white to slightly yellow powder with a slightly perceptible odor. | |
| Calcium Hydroxide FG E 526 | Büfa Chemikalien GmbH & Co.KG | Calcium Hydroxide FG E 526 (Calciumdihydroxid, gelöschter Kalk, Marmorkalkhydrat, Kalkwasser, Kalkmilch, Calciumlauge) is a white to beige powder with an earthy odor. | |
| Castor Oil | Castor International BV | Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial s...view more Castor Oil, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor and is pale-yellowish or almost colorless. There are numerous applications in various industrial segments, because of its unique molecule structure, such as lubricants in hydraulic fluids and 2 stroke engines, polyurethane in PU floor coatings, PU adhesives/sealants and PU foams, adhesives in hot-melts, and more. view less | |
| Castor Oil FSG Low Acid Value | Castor International BV | Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/...view more Castor Oil FSG Low Acid Value, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Oil FSG Low Water Content | Castor International BV | Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg K...view more Castor Oil FSG Low Water Content, also known as Ricinus oil, is a vegetable oil that is extracted from the Castor seed by mechanical pressing. It has a slight characteristic odor, is pale-yellowish or almost colorless, and has a low acid value of 0.7 mg KOH/g max. There are numerous applications in various industrial segments, because of its unique molecule structure, such as polyurethane in PU floor coatings, PU adhesives/sealants and PU foams. view less | |
| Castor Polyol (Type 114) | Castor International BV | Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in vari...view more Castor Polyol (Type 114) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1145. It is for use in various fillers, like silicates, quartz, calcium carbonate and barites, additives and pigments as a leveling aids and defoamers and it may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...view more Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. view less | |
| Castor Polyol (Type 116) | Castor International BV | Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with ...view more Castor Polyol (Type 116) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of approximately 1.01 (25°C) and is developed as an alternative for Desmophen-1155. It can be cured with MDI and its variants or by aliphatic isocyanates like HDI, in combination with castor polyol types 114 and 115. Castor Polyol (Type 116) has many applications, for instance: in various fillers, like silicates, quartz, calcium carbonate, and barites: in additives and pigments, like leveling aids and defoamers: and may be added to such formulations for preparing coatings, adhesives, floor coatings, electrical casting applications, and sealants. view less | |
| Castor Thickener (Blend) | Castor International BV | Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage ...view more Castor Thickener (Blend) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Blend) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Blend) has a melting point of 136°C to 140°C, a saponification value of 130 to 138 mg KOH/g, and an acid value of 6 mg KOH/g max. view less | |
| Castor Thickener (Pure) | Castor International BV | Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage st...view more Castor Thickener (Pure) is a rheological modifier used as a thixotropic agent in printing inks, paints, and coatings. There are no negative influences with light, water, and weather resistance. Castor Thickener (Pure) has advantages in improved storage stability and leveling, no hard settling of pigments, and provides sag control. Other applications are in adhesives, sealants, alkyd resins, and 2K PU systems. Castor Thickener (Pure) has a melting point of 82°C to 88°C, a saponification value of 177 to 182 mg KOH/g, and an acid value of 4 mg KOH/g max. view less | |
| Citric Acid Anhydrous FG E 330 | Büfa Chemikalien GmbH & Co.KG | Citric Acid Anhydrous FG E 330 (anhydrouscitricacid;beta-Hydroxytricarballylic acid;beta-hydroxytricarballylicacid) is an odorless white crystalline. | |
| Citric Acid Solution 46-49% | Büfa Chemikalien GmbH & Co.KG | Citric Acid Solution 46-49% (1,2,3-Tricarboxy-2-hydroxyprpane, 2-hydroxypropanetricarboxylicacid, acidecitrique) is an odorless, yellowish liquid. | |
| Citric Acid-1-Hydrate FG E 330 | Büfa Chemikalien GmbH & Co.KG | Citric Acid-1-Hydrate FG E 330 (2-Hydroxy-1,2,3-propantricarbonsäure Monohydrat, Zitronensäure Monohydrat) is an odorless, white crystalline powder. | |
| Citric Oil (D-Limonene) | Büfa Chemikalien GmbH & Co.KG | Citric Oil (D-Limonene) (Citrusterpene, 1-Methyl-4-prop-1-en-2-yl-cyclohexen, Carven, 1-Methyl-4-isopropenyl-1-cyclohexen) is a colorless to slightly yellow liquid with a lemon scent. | |
| Copper-(II)-Chlorid-2-Hydrate | Büfa Chemikalien GmbH & Co.KG | Copper-(II)-Chlorid-2-Hydrate (Kupfer(II)-chlorid Dihydrat (CuCl2 · 2 H2O)) is an odorless blue-green crystalline. | |
| Cyclohexane | Büfa Chemikalien GmbH & Co.KG | Cyclohexane (Hexahydrobenzol, Hexamethylen, Naphthen) is a colorless liquid with a sweetish odor. | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...view more Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...view more Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...view more Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Deionized Water Demineralized | Büfa Chemikalien GmbH & Co.KG | Deionized Water Demineralized is an odorless, clear liquid. | |
| Diacetone Alcohol | Büfa Chemikalien GmbH & Co.KG | Diacetone Alcohol (4-Hydroxy-4-methylpentan-2-on, 4-Hydroxy-4-methyl-2-pentanon) is a colorless liquid with a sweetish odor. | |
| Diammonium Phosphat Anhydrous | Büfa Chemikalien GmbH & Co.KG | Diammonium Phosphat Anhydrous is an odorless white powder. | |
| Diammoniumphosphat Wasserfrei Pulver | Büfa Chemikalien GmbH & Co.KG | Diammoniumphosphat Wasserfrei Pulver (ammoniummonohydrogenorthophosphate, diammoniumacidphosphate, diammonium, Ammonium Hydrogenphosphate) is an odorless white powder. | |
| Dibasicester | Büfa Chemikalien GmbH & Co.KG | Dibasicester is a colorless liquid with an ester-like odor. | |
| Diethanol Amine 99% | Büfa Chemikalien GmbH & Co.KG | Diethanol Amine 99% (Dihydroxydiethylamin, 2,2'-Iminodiethanol, Aminodiethanol, Bishydroxyethylamin, DEA) is a colorless viscous liquid with an ammonia-like odor. | |
| Diethyl Ether | Büfa Chemikalien GmbH & Co.KG | Diethyl Ether (1,1’-oxybisethane, Anesthesia ether, Anaesthetic ether, Diaethylaether) is a colorless liquid with a sweetish odor. | |
| Diethylene Glycol | Büfa Chemikalien GmbH & Co.KG | Diethylene Glycol (Diglykol, Diglycol, 2,2'-Oxydiethanol, Dihydroxydiethylether, 3-Oxapentan-1,5-diol) is an almost odorless, colorless liquid. | |
| Diisodecyl Phthalat (DIDP) Unstabilized | Büfa Chemikalien GmbH & Co.KG | Diisodecyl Phthalat (DIDP) Unstabilized (Phthalsäurediisodecylester, DIDP) is a colorless liquid with a characteristic odor. | |
| Diisononyl Phthalat (DINP) (Unstabilized) | Büfa Chemikalien GmbH & Co.KG | Diisononyl Phthalat (DINP) (Unstabilized) (Phthalsäurediisononylester, Di-iso-nonylphthalat, Phthalsäurebis, Bis(3,5,5-trimethylhexyl)phthalat) is an odorless, colorless liquid. | |
| Dimethyl Carbonate | Büfa Chemikalien GmbH & Co.KG | Dimethyl Carbonate (Kohlensäuredimethylester, Methylcarbonat, DMC) is a colorless liquid with a pleasant odor. | |
| Dimethyl Formamide | Büfa Chemikalien GmbH & Co.KG | Dimethyl Formamide (Ameisensäuredimethylamid, N,N-Dimethylmethanamid, N,N-Dimethylformamid, DMF) is a colorless liquid with a characteristic odor. | |
| Dipotassium Phosphate FG E 340 | Büfa Chemikalien GmbH & Co.KG | Dipotassium Phosphate FG E 340 (Dikaliumhydrogenphosphat, Kaliummonohydrogenphosphat, Kaliumphosphat dibasisch) is an odorless, colorless liquid. | |
| Disodium Phosphate-2-Hydrate FG E 339 (ii) | Büfa Chemikalien GmbH & Co.KG | Disodium Phosphate-2-Hydrate FG E 339 (ii) (Sodium hydrogenphosphate dihydrate, Monohydrogen Sodium Phosphate, Buffer Solution, Dibasic Sodium Phosphate) is an odorless, colorless solid. | |
| Dodecylbenzene Sulfonic Acid | Büfa Chemikalien GmbH & Co.KG | Dodecylbenzene Sulfonic Acid (2-Dodecylbenzolsulfonsäure; dodecyl benzene sulfonic acid ) is a brown liquid with a pungent odor. | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane form...view more Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethan...view more Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyure...view more Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyu...view more Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. view less | |
| EDTA-(H2Na2) Powder | Büfa Chemikalien GmbH & Co.KG | EDTA-(H2Na2) Powder ((Trilon BD), Ethylenediaminetetraacetic acid disodium salt) is a white powder with a product specific odor. | |
| EDTA-(Na4) Powder | Büfa Chemikalien GmbH & Co.KG | EDTA-(Na4) Powder (Trilon B) is a white powder with a product specific odor. | |
| EDTA-(Na4)-Solution Min. 39% | Büfa Chemikalien GmbH & Co.KG | EDTA-(Na4)-Solution Min. 39% (Tetranatriumethylendiamintetraacetat, Tetranatriumethylendiamintetra-acetat, Ethylendiamintetraessigsäure, Tetranatriumsalz, Ethylendinitrilotetraessigsäure, N,N'-Ethylendiamindiessigsäure) is an odorless, yellowish liquid. | |
| Eisen-(II)-Sulfat Ca. 6-7-Hydrat (Rieselfähig) | Büfa Chemikalien GmbH & Co.KG | Eisen-(II)-Sulfat Ca. 6-7-Hydrat (Rieselfa¨hig) is an odorless light green crystalline. | |
| Eisen-(II)-Sulfat-7-Hydrat (Quickfloc) | Büfa Chemikalien GmbH & Co.KG | Eisen-(II)-Sulfat-7-Hydrat (Quickfloc)) is an odorless light green crystalline. | |
| Ethanol 99% Denatured Type 642 | Büfa Chemikalien GmbH & Co.KG | Ethanol 99% Denatured Type 642 (Ethylalkohol, Weingeist, Spiritus, Sprit, Alkohol, Hydroxyethan) is a colorless liquid with an alcohol-like odor. | |
| Ethoxypropanol | Büfa Chemikalien GmbH & Co.KG | Ethoxypropanol is a colourless, clear liquid with an ether-like odor. | |
| Ethyl Acetate | Büfa Chemikalien GmbH & Co.KG | Ethyl Acetate (Essigsäureethylester, Essigester, Ethansäureethylester, Ethylethanoat) is a colorless liquid with a fruit-like odor. | |
| Ethyl Diglycol | Büfa Chemikalien GmbH & Co.KG | Ethyl Diglycol is a colorless liquid with a pleasant odor. | |
| Formaldehyd Solution 30% | Büfa Chemikalien GmbH & Co.KG | Formaldehyd Solution 30% is a transparent clear liquid that smells of formaldehyde. | |
| Gluconic Acid Solution 50% | Büfa Chemikalien GmbH & Co.KG | Gluconic Acid Solution 50% is a brownish yellow liquid with a sweetish odor. | |
| Glycerin 99.5% FG E 422 | Büfa Chemikalien GmbH & Co.KG | Glycerin 99.5% FG E 422 is a clear viscous liquid with a pleasant odor. | |
| Heptane | Büfa Chemikalien GmbH & Co.KG | Heptane is a colorless liquid with a paraffin-like odor. | |
| Hexamethylentetramine (Unstabilized) | Büfa Chemikalien GmbH & Co.KG | Hexamethylentetramine (Unstabilized) is a white crystalline with an ammonia-like odor. | |
| Hexane (Isomers) | Büfa Chemikalien GmbH & Co.KG | Hexane (Isomers) is a colorless liquid with a petrol-like odor. | |
| Hexylen Glycol | Büfa Chemikalien GmbH & Co.KG | Hexylen Glycol is a colorless liquid with a mild odor. | |
| Hydrofluoric Acid 40-42% | Büfa Chemikalien GmbH & Co.KG | Hydrofluoric Acid 40-42% is a colorless liquid with an acrid odor. | |
| Hydrogen Peroxide 35% | Büfa Chemikalien GmbH & Co.KG | Hydrogen Peroxide 35% is an odorless, colorless liquid. | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...view more Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. view less | |
| Hypophosphorous Acid 50% | Büfa Chemikalien GmbH & Co.KG | Hypophosphorous Acid 50% is an odorless, colorless liquid. |
