| BENAQUA® 4000 | Elementis | BENAQUA® 4000 rheological additive is an easily dispersible powder designed for lower - gloss and matt latex paints, textured and high-build aqueous coatings and waterborne adhesives. This organically modified hectorite clay based thickener is especially...view more BENAQUA® 4000 rheological additive is an easily dispersible powder designed for lower - gloss and matt latex paints, textured and high-build aqueous coatings and waterborne adhesives. This organically modified hectorite clay based thickener is especially useful in systems that are diluted with water prior to use. In lime cement rendering it improves workability and sag and slump resistance. view less | Request Sample |
| BENATHIX® | Elementis | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...view more BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. view less | Request Sample |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is a modified bentonite organoclay for solventborne low polarity aliphatic and aromatic paint and coating systems. BENTONE® 1000 is highly efficient and cost-effective. | Request Sample |
| BENTONE® 27 | Elementis | BENTONE® 27 rheological additive is a modified hectorite organoclay for use in high polarity aromatic and oxygenated solventborne paint and coating systems. | Request Sample |
| BENTONE® 34 | Elementis | BENTONE® 34 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. | Request Sample |
| BENTONE® 38 | Elementis | BENTONE® 38 rheological additive is a modified hectorite organoclay. This rheology modifier is advised for medium polarity aliphatic and aromatic solventborne paint and coating systems. | Request Sample |
| BENTONE® 52 | Elementis | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...view more BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. view less | Request Sample |
| BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...view more BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. view less | Request Sample |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...view more BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. view less | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE rheological additive is a refined hectorite modifier for easy dispersion. This clay based thickener is a suitable rheology modifier for various waterborne paints and coatings systems and especially for aqueous architectural coatings and spray ...view more BENTONE® DE rheological additive is a refined hectorite modifier for easy dispersion. This clay based thickener is a suitable rheology modifier for various waterborne paints and coatings systems and especially for aqueous architectural coatings and spray applied industrial coatings. view less | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| BENTONE® DY CE | Elementis | BENTONE® DY CE rheological additve additive is an organically modified powdered clay based thickener specially designed for waterborne paint and aqueous coating systems. This rheology modifier provides structured low shear viscosity build, synersis contro...view more BENTONE® DY CE rheological additve additive is an organically modified powdered clay based thickener specially designed for waterborne paint and aqueous coating systems. This rheology modifier provides structured low shear viscosity build, synersis control and excellent storage stability. view less | Request Sample |
| BENTONE® EW | Elementis | BENTONE® EW rheological additive is a refined and benificiated hectorite clay based thickener for waterborne paint and aqueous coating systems. This rheology modifier has outstanding sag and suspension control and can be incorporated in the pre-gel. | Request Sample |
| BENTONE® GS | Elementis | BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and ...view more BENTONE® GS rheological additive is a beneficiated, powdered hectorite clay specifically developed for waterborne construction applications such as aqueous (Lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars, and concrete. view less | Request Sample |
| BENTONE® HC | Elementis | BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions ...view more BENTONE® HC rheological additive is a refined hectorite clay based thickener suitable for the thickening and flow control of waterborne paint and aqueous coating systems. BENTONE® HC rheology modifier can be used to prepare high concentration dispersions of refined hectorite that develop their full viscosity in the final filled system. view less | Request Sample |
| BENTONE® LT | Elementis | BENTONE® LT rheological additive is an organically modified refined hectorite clay based thickener designed for waterborne paints and aqueous coating systems, primarily latex paints. This rheology modifier contributes to low and mid shear viscosity build...view more BENTONE® LT rheological additive is an organically modified refined hectorite clay based thickener designed for waterborne paints and aqueous coating systems, primarily latex paints. This rheology modifier contributes to low and mid shear viscosity build an in-can stability. view less | Request Sample |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | Request Sample |
| BENTONE® P270 CO | Elementis | BENTONE® P270 CO is a pre-activated hectorite based organoclay in castor oil. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE® P380 MS | Elementis | BENTONE® P380 MS is a pre-activated hectorite based organoclay in odourless mineral spirits. It comes in a paste form that is easier to use in production and gives higher efficiency than powdered organoclays, ensuring more consistent finished products. | Request Sample |
| BENTONE SD®-1 | Elementis | BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the pai...view more BENTONE SD®-1 rheological additive is a modified bentonite organoclay for low polarity aliphatic and aromatic paint and coating systems. It is a very easily dispersible additive for solventborne systems. BENTONE SD®-1 can be added at any point in the paint manufacturing process and can be used for post-correction. view less | Request Sample |
| BENTONE SD®-2 | Elementis | BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents...view more BENTONE SD®-2 rheological additive is a modified bentonite organoclay for solventborne high polarity aromatic and oxygeneted paint and coating systems, such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. view less | Request Sample |
| BENTONE SD®-3 | Elementis | BENTONE SD®-3 rheological additive is a modified bentonite organoclay for solventborne medium polarity aliphatic and aromatic paint and coating systems. BENTONE SD®-3 provides stable viscosity, controls sag and suspends pigments. | Request Sample |
| BENTONE® WBS | Elementis | BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, im...view more BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems. It prevents settling of pigments and fillers, provides low- and mid-shear viscosity, provides enhanced sag and slump resistance, improves workability, and is compatible with other thickeners. This product is recommended for waterborne decorative latex paints and similar systems, gypsum plasters, and buiding materials such as mortars and renderings based on lime, cement, and gypsum. view less | Request Sample |
| DAPRO® AP 7010 | Elementis | DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsio...view more DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilised emulsions and emulsion paints. view less | Request Sample |
| DAPRO® AP 7010S | Elementis | DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. | Request Sample |
| DAPRO® BEZ 75 | Elementis | DAPRO® BEZ 75 rheological additive is an organocaly activator and can be used in solventborne coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. This rheology modifier can be ...view more DAPRO® BEZ 75 rheological additive is an organocaly activator and can be used in solventborne coatings as an effective auxiliary solvent to fight settling and sagging. It is particularly useful in aromatic-free formulations. This rheology modifier can be incorporated to produce easy to handle BENTONE® pre-gels for aromatic- free systems and improves anti-settling. view less | Request Sample |
| DAPRO® DF 17 | Elementis | DAPRO® DF 17 is a general purpose, VOC-free let down defoamer for aqueous decorative coatings. DAPRO® DF 17 can be used in all waterborne paints and decorative coatings and is suitable for a broad range of latex systems. | Request Sample |
| DAPRO® DF 21 | Elementis | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...view more DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. view less | Request Sample |
| DAPRO® DF 52 | Elementis | DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unaccept...view more DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unacceptable in the chemical waste water. view less | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...view more DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. view less | Request Sample |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of...view more DAPRO® DF 880 is a silicone - free defoamer that can be used to prevent foam formation in waterborne coating and aquoeus paint systems. DAPRO® DF 880 let down defoamer provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. view less | Request Sample |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is a resistance reducing agent for reducing the resistance of solventbased paints that are sprayed electrostatically. | Request Sample |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 agent is a low odour aqueous coalescing agent that has been designed for waterborne dispersions, dispersion paints and plasters. | Request Sample |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clea...view more DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clear liquid and is predominately based on renewable resources. view less | Request Sample |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. This product is easy to incorporate in solventborne coatings and inks. | Request Sample |
| DAPRO® S-65 | Elementis | DAPRO® S-65 is an interfacial tension modifier for solventborne paint and coatings systems. This flow and levelling agent is also suitable for UV curable coatings and ink systems. | Request Sample |
| DAPRO® U99 | Elementis | DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as water...view more DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as waterborne and solventborne alkyd systems and decorative coatings. view less | Request Sample |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...view more DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. view less | Request Sample |
| DUMACIL® 100 FGK | Elementis | DUMACIL® 100 FGK is a very hydrophobic silica and easily dispersable in organic systems. It provided excellent performance in defoamers for use in paint, paper, latex and textile industries. | Request Sample |
| DUMACIL® 300 FGK | Elementis | DUMACIL® 300 FGK is micro-fine silica treated with an organic silica compound. The resultant silica is extremely hydrophobic and easily dispersed in organic system. DUMACIL® 300 FGK provides excellent performance in defoamers for use in paint, paper, late...view more DUMACIL® 300 FGK is micro-fine silica treated with an organic silica compound. The resultant silica is extremely hydrophobic and easily dispersed in organic system. DUMACIL® 300 FGK provides excellent performance in defoamers for use in paint, paper, latex and textile industries. view less | Request Sample |
| Kemapox® EM 260 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coating...view more Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 77000-120000 mPas at 23°C. view less | |
| Kemapox® EM 267 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be ...view more Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 5000 mPas at 23°C. view less | |
| Kemapox® HF 308 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°...view more Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 210 mPas at 23°C. view less | |
| Kemapox® HF 317 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also...view more Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also suitable for castings with an extended pot life. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
| Kemapox® HF 321 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 321 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 22 mPas at 23°C. | |
| Kemapox® HF 324 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 324 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 26 mPas at 23°C. | |
| Kemapox® HF 326 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at ...view more Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
| Kemapox® HF 328 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 328 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in epoxy systems for primers and coatings for solvent-free systems. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 150 mPas at 23°C. | |
| Kemapox® HF 331 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mP...view more Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mPas at 23°C. view less | |
| Kemapox® HF 332 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications...view more Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications, coatings, and mortars. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. view less | |
| Kemapox® HF 337 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient tempera...view more Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient temperatures. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
| Kemapox® HF 338 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 338 is a modified aliphatic polyamine epoxy hardener. This product is designed for primers and darker colored coatings and mortars for solvent-free systems. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 200 mPas at 23°C. | |
| Kemapox® HF 339 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 ...view more Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
| Kemapox® HF 340 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It ...view more Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 60 mPas at 23°C. view less | |
| Kemapox® HF 343 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 343 is a modified aliphatic polyamine epoxy hardener. This product is designed for systems where elastic and tough self-leveling floors and coatings are required. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. | |
| Kemapox® HF 346 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/...view more Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 70 mPas at 23°C. view less | |
| Kemapox® HF 349 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C a...view more Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 50 mPas at 23°C. view less | |
| Kemapox® HF 366 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkal...view more Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvent is required. It has a density of 1.00 g/cm3 at 23°C and a viscosity of 1500 mPas at 23°C. view less | |
| Kemapox® HF 367 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkali...view more Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvents is required. It has a density of 1.10 g/cm3 at 23°C and a viscosity of 1100 mPas at 23°C. view less | |
| Kemapox® HF 369 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis an...view more Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis and solvents is required. It can also be used to accelerate slow-setting systems such as tar-epoxy coatings or mortars. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 1900 mPas at 23°C. view less | |
| Kemapox® HF 381 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 28000 mPas at 23°C. view less | |
| Kemapox® HF 383 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 4000 mPas at 25°C. view less | |
| Kemapox® HF 385 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 18000 mPas at 25°C. view less | |
| Kemapox® HF 388 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 9000 mPas at 23°C. view less | |
| Kemapox® HW 500 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and floorin...view more Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 2000 mPas at 25°C. view less | |
| Kemapox® HW 502 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring application...view more Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.08 g/cm3 at 23°C and a viscosity of 17000 mPas at 25°C. view less | |
| Kemapur® PCU 200 S | CTP Egypt S.A.E. CTP Original | Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring appli...view more Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring applications. view less | |
| M-P-A® 2000 X | Elementis | M-P-A 2000 X rheological additive is an easily incorporated, highly efficient organic anti settling and sag control agent supplied as a pourable dispersion in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating ap...view more M-P-A 2000 X rheological additive is an easily incorporated, highly efficient organic anti settling and sag control agent supplied as a pourable dispersion in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating applications. view less | Request Sample |
| M-P-A® 60 X | Elementis | M-P-A® 60 X rheological additive is a highly efficient anti settling and sag control agent supplied as a soft paste dispersed in xylene. This rheology modifier is suitable for a wide range of solventborne paint and coating applications. | Request Sample |
| NALZIN® 2 | Elementis | NALZIN® 2, a zinc hydroxy phosphite, is a modern non-toxic anti-corrosive aqueous corrosion inhibitor suitable for waterborne and solvent-borne paints alike. Manufactured by a patented process, NALZIN® 2 has excellent corrosion-inhibiting properties and i...view more NALZIN® 2, a zinc hydroxy phosphite, is a modern non-toxic anti-corrosive aqueous corrosion inhibitor suitable for waterborne and solvent-borne paints alike. Manufactured by a patented process, NALZIN® 2 has excellent corrosion-inhibiting properties and is cost-effective. view less | Request Sample |
| NALZIN® FA 179 | Elementis | NALZIN® FA 179 is recommended as an corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for aqueous application as an inhibitor against the formation of in-can corrosion. Emulsified i...view more NALZIN® FA 179 is recommended as an corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for aqueous application as an inhibitor against the formation of in-can corrosion. Emulsified in water, NALZIN® FA 179 can also be used as a temporary rust inhibitor. view less | Request Sample |
| NALZIN® FA 579 | Elementis | NALZIN® FA 579 is a nitrite-free liquid corrosion inhibitor for aqueous coatings which counteracts flash rusting and in-can corrosion. Emulsified in water NALZIN® FA 579 is also used as a temporary rust inhibitor. It is suitable for low-pH formulations. | Request Sample |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a liquid aqueous dispersing and wetting agent agent for use in waterborne, VOC- compliant colorants and pigment dispersions. | Request Sample |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can als...view more NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can also be used as a interfacial tension modifier of compatibilizer. view less | Request Sample |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 is a unique solvent free/ VOC - free aqueous pigment dispersing and wetting agent specifically used in waterborne paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueou...view more NUOSPERSE® 2008 is a unique solvent free/ VOC - free aqueous pigment dispersing and wetting agent specifically used in waterborne paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as well as organic solvent based coatings and inks. view less | Request Sample |
| NUOSPERSE® 657 RD | Elementis | NUOSPERSE® 657 RD is a wetting and dispersing solvent for pigments which can be applied to practically all solvent based paint systems. The product can also be applied in the vinyl industry. It contains very low content of cyclic aromatic hydrocarbons. By...view more NUOSPERSE® 657 RD is a wetting and dispersing solvent for pigments which can be applied to practically all solvent based paint systems. The product can also be applied in the vinyl industry. It contains very low content of cyclic aromatic hydrocarbons. By adding NUOSPERSE® 657 RD to the pigment paste before the grinding process, a quicker wetting of the pigments as well as a better degree of dispersion is obtained. This allows a shorter grinding time, low viscosity of the grinding paste, improved stability and better coloring and covering of the paint. view less | Request Sample |
| NUOSPERSE® 757 | Elementis | NUOSPERSE® 757 is a modified alkyd resin pigment wetting and dispersing agent which can be used in a wide range of non-aqueous/solventborne paint systems. NUOSPERSE® 757 contains a very low content of cyclic aromatic hydrocarbons. | Request Sample |
| NUOSPERSE® 9850 | Elementis | NUOSPERSE® 9850 polymeric colorant dispersing and wetting agent is highly effective for carbon black and most types of organic pigments. It is also suitable for inorganic pastes. NUOSPERSE® 9850 offers a rapid pigment wetting and excellent pigment stabili...view more NUOSPERSE® 9850 polymeric colorant dispersing and wetting agent is highly effective for carbon black and most types of organic pigments. It is also suitable for inorganic pastes. NUOSPERSE® 9850 offers a rapid pigment wetting and excellent pigment stability. It is recommended for use in a wide range of high-performance, solventborne coatings and is an effective dispersant for both paints and colorants. view less | Request Sample |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is an aqueous compatibilizer additive to improve the incorporation of universal waterborne tinting pastes into the base dispersion paint. | Request Sample |
| NUOSPERSE® FA 162 | Elementis | NUOSPERSE® FA 162 is an aliphatic alcohol ethoxylated phosphate ester wetting and dispersing agent for waterborne pigments in plasticizer and aqueous universal tinting aids. It is an alternative for alkylphenol ethoxylated phosphate ester wetting and disp...view more NUOSPERSE® FA 162 is an aliphatic alcohol ethoxylated phosphate ester wetting and dispersing agent for waterborne pigments in plasticizer and aqueous universal tinting aids. It is an alternative for alkylphenol ethoxylated phosphate ester wetting and dispersing agents. view less | Request Sample |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 is a highly concentrated liquid pigment wetting dispersing agent for application in organic solventborne/aqueous systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for waterborne carbon black, for ...view more NUOSPERSE® FA 196 is a highly concentrated liquid pigment wetting dispersing agent for application in organic solventborne/aqueous systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for waterborne carbon black, for thermoplastic acrylic systems and as an compatibilizer to improve the action of universal tinting pastes in basic alkyd paints. view less | Request Sample |
| NUOSPERSE® FA 601 | Elementis | NUOSPERSE® FA 601 is a liquid wetting and dispersing solvent which has been especially formulated for use in organic solvent based paint systems. NUOSPERSE® FA 601 is effective for both organic and inorganic pigments. Properties such as opacity, gloss, co...view more NUOSPERSE® FA 601 is a liquid wetting and dispersing solvent which has been especially formulated for use in organic solvent based paint systems. NUOSPERSE® FA 601 is effective for both organic and inorganic pigments. Properties such as opacity, gloss, colour strength and brightness can be considerably improved at lower cost. view less | Request Sample |
| NUOSPERSE® FA 620 | Elementis | NUOSPERSE® FA 620 is a wetting and dispersing agent for the manufacture of highly concentrated, low viscosity waterborne and aqueous pigment dispersions. | Request Sample |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 is a solvent liquid corrosion inhibitor for non-aqueous/solventborne systems. NUOSPERSE® FK 329 is also recommended as a cationic pigment dispersing agent. | Request Sample |
| NUOSPERSE® FN 1566 | Elementis | NUOSPERSE® FN 1566 is an aqueous nonyl phenol ethoxylate dispersing and wetting agent and has particular application as a wetting agent and compatibilizer for pigments in waterborne coatings. | Request Sample |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic aqueous pigment wetting and dispersing agent primarily for use in waterborne coating formulations. NUOSPERSE® FN 211 is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. NUOSPERSE® FN 211 is...view more NUOSPERSE® FN 211 is a nonionic aqueous pigment wetting and dispersing agent primarily for use in waterborne coating formulations. NUOSPERSE® FN 211 is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. NUOSPERSE® FN 211 is labeling-free in the EU. view less | Request Sample |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the pai...view more NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the paint industry as pigment wetting agents, emulsifiers and stabilizers. view less | Request Sample |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 is an alkylphenol-free, nonionic wetting and dispersing agent and emulsifier. It contains only water as its volatile component and therefore may be classified as a VOC compliant compound. NUOSPERSE® FN 265 is an excellent candidate to s...view more NUOSPERSE® FN 265 is an alkylphenol-free, nonionic wetting and dispersing agent and emulsifier. It contains only water as its volatile component and therefore may be classified as a VOC compliant compound. NUOSPERSE® FN 265 is an excellent candidate to substitute NP-10E in waterborne paints, pigment dispersions and most aqueous emulsions and dispersions. view less | Request Sample |
| NUOSPERSE® FN 267 | Elementis | NUOSPERSE® FN 267 is a unique, aqueous labeling-free nonionic wetting and dispersing agent and emulsifier for aqueous paint and coating systems. | Request Sample |
| NUOSPERSE® FN 270 | Elementis | NUOSPERSE® FN 270 is a universal aqueous pigment wetting and dispersing agent for a wide variety of waterborne latex paints. It provides the wetting and dispersing properties of traditional APEO-containing wetting and dispersing agents but with much easie...view more NUOSPERSE® FN 270 is a universal aqueous pigment wetting and dispersing agent for a wide variety of waterborne latex paints. It provides the wetting and dispersing properties of traditional APEO-containing wetting and dispersing agents but with much easier handling and without the disadvantages of regulatory labeling. It shows superb storage stability, both as a product itself and when used in a paint. view less | Request Sample |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic aqueous polymeric dispersing and wetting agent for use in waterborne coating and ink formulations and pigment pastes. NUOSPERSE® FX 365 shows outstanding pigment wetting and stabilizing properties. | Request Sample |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, aqueous polymeric pigment dispersing and wetting agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | Request Sample |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 is a highly effective aqueous pigment dispersing and wetting agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polym...view more NUOSPERSE® FX 600 is a highly effective aqueous pigment dispersing and wetting agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of organic solvents. view less | Request Sample |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even af...view more NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even after extended storage of the coating system. view less | Request Sample |
| NUOSPERSE® FX 609 | Elementis | NUOSPERSE® FX 609 is a pigment dispersing and wetting agent designed for use in filler/pigment concentrates. It ensures extremely stable pigment dispersions for use in aqueous and waterborne systems. | Request Sample |
| NUOSPERSE® FX 610 | Elementis | NUOSPERSE® FX 610 is a new highly effective aqueous pigment dispersing agent to apply primarily in waterborne architectural coatings, pigment pastes, colorants and printing inks. The product is a liquid, multi-functional polymer and is VOC-free. It is rec...view more NUOSPERSE® FX 610 is a new highly effective aqueous pigment dispersing agent to apply primarily in waterborne architectural coatings, pigment pastes, colorants and printing inks. The product is a liquid, multi-functional polymer and is VOC-free. It is recommended in a wide variety of binders for decorative as well as industrial applications. It is the choice for waterborne alkyd formulations. view less | Request Sample |
| NUOSPERSE® FX 7500W | Elementis | NUOSPERSE® FX 7500W is a wetting and dispersing agent for waterborne paints and aqueous inks. It offers an excellent viscosity reducing effect, while improving color strength of organic and inorganic pigments. | Request Sample |
| NUOSPERSE® FX 9086 | Elementis | NUOSPERSE® FX 9086 is a pigment dispersing agent is designed for use in pigment pastes and provides extremely stable pigment dispersions for application in a wide range of solventborne coatings and inks. | Request Sample |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 is an environmentally friendly aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full color development and maximum production output. This additive stabilizes the finished dispersion to prev...view more NUOSPERSE® W-30 is an environmentally friendly aqueous dispersing and wetting agent that can be used with all types of pigments to help provide full color development and maximum production output. This additive stabilizes the finished dispersion to prevent re-flocculation and viscosity drift. NUOSPERSE W-30 is compatible with most waterborne coatings vehicles and can be used in decorative paints, industrial coatings and maintenance finishes, automotive coatings. view less | Request Sample |
