Kemapox® EM 260 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coating...view more Kemapox® EM 260 is a branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 77000-120000 mPas at 23°C. view less | |
Kemapox® EM 267 | CTP Egypt S.A.E. CTP Original | Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be ...view more Kemapox® EM 267 is a low-viscosity, branched-urethane polymer with blocked, isocyanate groups which can be cured using amine hardeners. This product is used for internal modification of epoxy systems to impart to them flexibility and toughness. It can be used in coatings, sealing membranes, and joint filler applications. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 5000 mPas at 23°C. view less | |
Kemapox® HF 308 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°...view more Kemapox® HF 308 is a modified aliphatic amine epoxy hardener. This product works well with injection resins at ambient temperatures. It can be used in fast curing mortar systems, adhesives, and coal tar epoxy systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 210 mPas at 23°C. view less | |
Kemapox® HF 317 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also...view more Kemapox® HF 317 is a modified aliphatic polyamine epoxy hardener. This product produces very good films in adverse conditions that minimize problems of intermediate adhesion. It can be used in primers and coatings at high ambient temperatures, and is also suitable for castings with an extended pot life. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 321 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 321 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 22 mPas at 23°C. | |
Kemapox® HF 324 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 324 is a modified cycloaliphatic polyamine epoxy hardener. This product is used as a hardener for epoxy resin formulations and blocked polyurethane prepolymers. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 26 mPas at 23°C. | |
Kemapox® HF 326 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at ...view more Kemapox® HF 326 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for injection epoxy systems, and it can also be used in grouting, mortars, and adhesives. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 328 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 328 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in epoxy systems for primers and coatings for solvent-free systems. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 150 mPas at 23°C. | |
Kemapox® HF 331 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mP...view more Kemapox® HF 331 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in production of superior quality coatings, floorings and mortars for solvent-free systems. It has a density of 1.02 g/cm3 at 23°C and a viscosity of 1200 mPas at 23°C. view less | |
Kemapox® HF 332 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications...view more Kemapox® HF 332 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for applications that need good chemical and mechanical resistance with enhanced resistance to yellowing. It can be used in self-leveling flooring applications, coatings, and mortars. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. view less | |
Kemapox® HF 337 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient tempera...view more Kemapox® HF 337 is a modified cycloaliphatic polyamine epoxy hardener. This product is often used in coatings and mortars for solvent-free systems. It can be highly filled to give high compressive strength mortars and can be applied at low ambient temperatures. It has a density of 1.03 g/cm3 at 23°C and a viscosity of 80 mPas at 23°C. view less | |
Kemapox® HF 338 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 338 is a modified aliphatic polyamine epoxy hardener. This product is designed for primers and darker colored coatings and mortars for solvent-free systems. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 200 mPas at 23°C. | |
Kemapox® HF 339 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 ...view more Kemapox® HF 339 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for epoxy primers, coatings and mortars for solvent-free systems and it can provide a good cure even at temperatures below 8°C. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 190 mPas at 23°C. view less | |
Kemapox® HF 340 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It ...view more Kemapox® HF 340 is a modified cycloaliphatic polyamine epoxy hardener. This product is designed for coatings and mortars for solvent-free systems when applied at relatively low ambient temperatures. It provides good chemical and mechanical properties. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 60 mPas at 23°C. view less | |
Kemapox® HF 343 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 343 is a modified aliphatic polyamine epoxy hardener. This product is designed for systems where elastic and tough self-leveling floors and coatings are required. It has a density of 0.96 g/cm3 at 23°C and a viscosity of 350 mPas at 23°C. | |
Kemapox® HF 346 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/...view more Kemapox® HF 346 is a modified aliphatic polyamine epoxy hardener. This product is a low viscosity, slow-setting hardener designed for conditions where a low setting time for coatings and primers is required in hot temperatures. It has a density of 1.01 g/cm3 at 23°C and a viscosity of 70 mPas at 23°C. view less | |
Kemapox® HF 349 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C a...view more Kemapox® HF 349 is a modified aliphatic polyamine epoxy hardener. This product is a low-viscosity, medium-setting hardener recommended for primers and general purpose coatings and floorings in solvent-free systems. It has a density of 0.95 g/cm3 at 23°C and a viscosity of 50 mPas at 23°C. view less | |
Kemapox® HF 366 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkal...view more Kemapox® HF 366 is a Mannich-based, solvent-free epoxy hardener. This product is a high chemical resistant hardener that is recommended for use in mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvent is required. It has a density of 1.00 g/cm3 at 23°C and a viscosity of 1500 mPas at 23°C. view less | |
Kemapox® HF 367 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkali...view more Kemapox® HF 367 is a Mannich-based, solvent-free epoxy hardener. This product is a fast-setting, high chemical resistant hardener recommended for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis, and solvents is required. It has a density of 1.10 g/cm3 at 23°C and a viscosity of 1100 mPas at 23°C. view less | |
Kemapox® HF 369 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis an...view more Kemapox® HF 369 is a phenol-free, Mannich-based epoxy hardener. This product is a fast-setting, high chemical resistant hardener designed for mortars, adhesives and coatings for solvent-free systems where high chemical resistance against acids, alkalis and solvents is required. It can also be used to accelerate slow-setting systems such as tar-epoxy coatings or mortars. It has a density of 1.04 g/cm3 at 23°C and a viscosity of 1900 mPas at 23°C. view less | |
Kemapox® HF 381 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 381 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 28000 mPas at 23°C. view less | |
Kemapox® HF 383 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 383 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very slow setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 4000 mPas at 25°C. view less | |
Kemapox® HF 385 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 385 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.13 g/cm3 at 23°C and a viscosity of 18000 mPas at 25°C. view less | |
Kemapox® HF 388 | CTP Egypt S.A.E. CTP Original | Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and ...view more Kemapox® HF 388 is a modified aromatic polyamine epoxy hardener. This product is a very high chemical resistant hardener with a very fast setting time for solvent-free systems. It is recommended for very high resistance to organic and inorganic acids and alkalis. It has a density of 1.12 g/cm3 at 23°C and a viscosity of 9000 mPas at 23°C. view less | |
Kemapox® HW 500 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and floorin...view more Kemapox® HW 500 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free epoxy resins or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.05 g/cm3 at 23°C and a viscosity of 2000 mPas at 25°C. view less | |
Kemapox® HW 502 | CTP Egypt S.A.E. CTP Original | Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring application...view more Kemapox® HW 502 is a water-reducible, modified cycloaliphatic polyamine epoxy hardener. This product is a water-borne hardener that can be used with either solvent-free or emulsified epoxy resin systems. It can be used in coatings and flooring applications, especially for concrete and steel substrates. It has a density of 1.08 g/cm3 at 23°C and a viscosity of 17000 mPas at 25°C. view less | |
Kemapur® PCU 200 S | CTP Egypt S.A.E. CTP Original | Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring appli...view more Kemapur® PCU 200 S is a polycarbonate, 2K water-borne matte coating and sealer. This product has excellent abrasion, chemical, and scratch resistance. It can be used to seal concrete and screed surfaces, as well as in epoxy and polyurethane flooring applications. view less | |
M-109 | Cortec Corporation | M-109 is a multimetal solvent-based organic vapor and contact corrosion inhibitor for use in solvent and some waterborne coatings. The use level recommended is 1 to 3% by weight. | |
M-110 | Cortec Corporation | M-110 is an organic corrosion inhibitor that can be used in solvent-based and some waterborne coatings. It is recommended to use between 1% and 3% (by weight) to improve corrosion resistance. | |
M-118 | Cortec Corporation | M-118 is a waterborne corrosion inhibitor additive for manufacturers of coatings, adhesives, and other related materials. It contains a combination of organic and inorganic corrosion inhibitors that synergistically work together in reducing corrosion. | |
M-119 | Cortec Corporation | M-119 is a water-based corrosion inhibitor additive for manufacturers of waterborne coatings or compounds. It provides contact and vapor phase corrosion inhibition for ferrous and non-ferrous metals. | |
M-119LV | Cortec Corporation | M-119LV is a water-based corrosion inhibitor additive for manufacturers of waterborne coatings or compounds. It provides contact and vapor phase corrosion inhibition for ferrous and non-ferrous metals. | |
M-168 | Cortec Corporation | M-168 is a solvent-based vapor and contact corrosion inhibitor to be used as an additive to conventional epoxies and alkyds, solvent-based and oil-based coatings and some lubricants. M-168 provides a corrosion resistant semi-solid film. M-168 is used at 2...view more M-168 is a solvent-based vapor and contact corrosion inhibitor to be used as an additive to conventional epoxies and alkyds, solvent-based and oil-based coatings and some lubricants. M-168 provides a corrosion resistant semi-solid film. M-168 is used at 2% to 20% by weight. view less | |
M-235 | Cortec Corporation | M-235 is a proven corrosion inhibitor for copper, copper-based alloys and other yellow metals. M-235 functions by reacting with surface copper oxides to form a strong, insoluble polymeric complex. This complex creates a thin layer or film on metal surface...view more M-235 is a proven corrosion inhibitor for copper, copper-based alloys and other yellow metals. M-235 functions by reacting with surface copper oxides to form a strong, insoluble polymeric complex. This complex creates a thin layer or film on metal surfaces that provides both a mechanical and electrochemical barrier against corrosive attack. view less | |
M-240 | Cortec Corporation | M-240 is a multimetal, flash rust, corrosion inhibitor additive for water-based paints, sealers, adhesives, fluids and more. Free of silicones and surfactants, this product may be introduced to formulations at virtually any step of production. | |
M-241 | Cortec Corporation | M-241 is an inhibitor for protection of aluminum and it’s alloys from “in can” corrosion, waterbased coolants, process and metal working fluids, and more. This product may be introduced to formulations at virtually any step of production. | |
M-380 | Cortec Corporation | M-380 is a water-based corrosion inhibitor that is designed to be used with carboxylated acrylic or styrene-acrylic latices. M-380 provides corrosion inhibition to ferrous and non-ferrous surfaces. | |
M-381 | Cortec Corporation | M-381 is a new generation of corrosion inhibitors additives which utilize nanoparticle technology. M-381 is a water-based corrosion inhibitor designed for the use in waterborne coatings or compounds. | |
M-435 | Cortec Corporation | M-435 is a multimetal organic corrosion inhibitor additive for water and solvent-based paints, sealers, adhesives, fluids and more. It is silicone and surfactant-free and can be introduced to formulations at virtually any step of production. | |
M-5365 | Cortec Corporation | M-5365 is a liquid additive for solvent-based and a limited number of waterborne systems. M-5365 may be added in a range of 1% to 3% weight to improve corrosion and water resistance. It is recommended as an additive for maintenance coatings. | |
M-95 | Cortec Corporation | M-95 is a very low foaming, water soluble corrosion inhibitor concentrate. It provides corrosion protection for steel, copper, brass, magnesium, aluminum, bronze, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-95 prevents co...view more M-95 is a very low foaming, water soluble corrosion inhibitor concentrate. It provides corrosion protection for steel, copper, brass, magnesium, aluminum, bronze, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-95 prevents corrosion in both phases: contact and vapor. view less |