| Solacril 105 ACP | Ichemco | Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protectiv...view more Solacril 105 ACP is a solventborne, solvent-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 2-5 cm, and has a peel of 2500-3000 g/in. Solacril 105 ACP is most commonly used in the production of protective films for plastic and metal surfaces, as well as removable tapes and labels. view less | |
| Solacril 203 | Ichemco | Solacril 203 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 38-42% and a peel of 600-800 g/in. Solacril 203 is most commonly used in protective film applications. | |
| Solacril 204 | Ichemco | Solacril 204 is a solventborne, acrylic-based pressure sensitive adhesive. This product has a total solids content of 49-51%, has a tack of 1-3 cm, and a peel of 500-800 g/in. Solacril 204 is most commonly used in protective film applications. | |
| Tackmelt A 44 UV | Ichemco | Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and...view more Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and a viscosity at 185°C of 2000-5000 mPa.s. Tackmelt A 44 UV is most commonly used in label and double-sided adhesive tape applications. view less | |
| Tacksol IS 56M2 | Ichemco | Tacksol IS 56M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%, has a tack of 6-10 cm, and has a peel of 1800-2200 g/in. Tacksol IS 56M2 is most commonly used in applications where high shear...view more Tacksol IS 56M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%, has a tack of 6-10 cm, and has a peel of 1800-2200 g/in. Tacksol IS 56M2 is most commonly used in applications where high shear, high adhesivity, and heat resistance are required. view less | |
| Tackwhite A 33 | Ichemco | Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and li...view more Tackwhite A 33 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 200-400 mPa.s. Tackwhite A 33 is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 33 (V1) | Ichemco | Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V1) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 12,000-22,000 mPa.s. Tackwhite A 33 (V1) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 33 (V2) | Ichemco | Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transpar...view more Tackwhite A 33 (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 50-52% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 33 (V2) is most commonly used in transparent label, transparent tape, and light-resistant pressure sensitive article applications. view less | |
| Tackwhite A 4 MED | Ichemco | Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applicatio...view more Tackwhite A 4 MED is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 200-800 mPa.s. Tackwhite A 4 MED is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A 4 MED (V2) | Ichemco | Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive ar...view more Tackwhite A 4 MED (V2) is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 53-58% and a Brookfield viscosity at 25°C of 17,000-27,000 mPa.s. Tackwhite A 4 MED (V2) is most commonly used in pressure sensitive article applications where higher tack, adhesion, water-resistance, and cold-resistance properties are required. view less | |
| Tackwhite A 80 FR | Ichemco | Tackwhite A 80 FR is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 52-56%, a tack of 5 cm, and a peel of 400 g/in. Tackwhite A 80 FR is most commonly used as a fire retardant in film coating applications. | |
| Tackwhite AP 03 HP | Ichemco | Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film productio...view more Tackwhite AP 03 HP is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 6-12 cm, and a peel of 1300-1600 g/in. Tackwhite AP 03 HP is most commonly used in protective polyethylene film production applications. view less | |
| Tackwhite AP 15 | Ichemco | Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production appli...view more Tackwhite AP 15 is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 45-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 is most commonly used in protective polyethylene film production applications. view less | |
| Tackwhite AP 15 M | Ichemco | Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production a...view more Tackwhite AP 15 M is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 43-47%, a tack of 8-15 cm, and a peel of 500-1000 g/in. Tackwhite AP 15 M is most commonly used in protective polyethylene film production applications. view less | |
| Tackwhite FR 5 | Ichemco | Tackwhite FR 5 is a waterborne, styrene butadiene copolymer (SBR) pressure sensitive adhesive. This product has a total solids content of 55-59%, a tack of less than 15 cm, and a peel of 1000-1700 g/in. Tackwhite FR 5 is most commonly used in double-sided...view more Tackwhite FR 5 is a waterborne, styrene butadiene copolymer (SBR) pressure sensitive adhesive. This product has a total solids content of 55-59%, a tack of less than 15 cm, and a peel of 1000-1700 g/in. Tackwhite FR 5 is most commonly used in double-sided tape applications where flame-resistance is required. view less | |
| Tackwhite NA 55 | Ichemco | Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film product...view more Tackwhite NA 55 is a water-based acrylic pressure sensitive adhesive. This product has a total solids content of 49-51% as a Brookfield viscosity at 25°C of less than 500 mPa.s. Tackwhite NA 55 is most commonly used in protective polyethylene film production applications. view less |
